Every injury and fatality MSHA has on file. Filter by state, year, sector, classification, experience, or any keyword from the investigator's narrative.
Email me when a new incident matches these filters. One confirmation email; unsubscribe anytime.
The victim was found laying on the ground by the rear bulk trailer.
A truck got stuck. The loader backed up to the truck to pull it out. The loader operator and the truck operator both got out to hook the chain up. The loader rolled back and crushed the truck operator between the truck and loader. THIS PERSON IS NOT AN EMPLOYEE OF OURS, WE DO NOT HAVE HIS INFORMATION. The loader impacted the loader operator in the back, he moved out of the way.
Employee and another member were changing a bottom roller on the Cross Hollow belt at the # 130 mine. Injured was laying on the bottom belt changing the roller. The belt suddenly started and traveled approximately 49' before employee fell approximately 39' to the ground. EE passed away on 12/14/07 at 11:30pm.
While dumping short for a dozer to extend higher berms, the injured backed his end dump truck into a different area away from the dump area. The victim landed upside down in water at the bottom of the pit. The victim was pronounced dead at the scene by the medical examiner.
Conveyor Belt broke free from feeder breaker and struck employee on his back, knocking him down.
While The Page dragline was still digging, the Assistant on the dragline crew entered the area in the back of the dragline w/o first notifying the dragline operator. The Assistant was injured when he was struck by the dragline shoe as the dragline turned to deposit a load of material. The Assistant was promptly transported to the hospital and he died there the following day.
Employee was alone on the 3rd floor of the plant when he fell approximately 20 feet to the ground floor.
While cleaning the off-side walkway on #4 belt, 2 Heintzmann jacks became dislodged and a large rock struck employee pushing him into the belt line. The accident is currently under investigation by the WVOMHS&T, MSHA and the Company.
Employee was assessing work area at floor opening. Employee fell into floor opening. The ensuing fall resulted in fatal head injuries.
Employee was working on a crusher. A bucket tooth was wedged in the crusher. The crusher was jacked up. The jack kicked out and employee was struck in the head by an unknown object and knocked him into the bed of the truck where he struck his head on an unknown object. Employee received head trauma.
The locomotive was coming back into the plant when EE had crossed over to the old scales side road. He got out of his truck & started to cross the tracks when the locomotive operator saw him. They heard him on the radio say he had broke the 7 car. A coworker asked another coworker if he could see him & when he looked back he saw him on the tracks. He had been hit by the locomotive.
Victim was discovered caught between the conveyor belt and the continuous haulage dolley. Although the coroner report is not available, it appeared that the victim expired from injuries received from the event.
Employee was found on the ground in front of a Cat 777D water truck. It appears that the employee fell to the ground from the equipment. There were no witnesses to the event. Autopsy report is pending.
Employee was retrieving pry bar from storage area on the ground, when personnel above him lost control of new return roller they were changing out. The return roller fell, striking the employee on the ground. While the employee was wearing proper safety equipment at the time, the impact of the roller resulted in his death.
A fatal accident occurred when a miner became entangled in a take up pulley on the #13 conveyor belt. A guard was in place at the time of the accident.
A Sein Brute 612 mantrip carrying two miners was traveling at 38-39 xc, 592 S.Longwall Panel 3 Road (1 Room). A mechanical failure within the steering mechanism resulted in the over-turning of the mantrip. A miner was pinned under the mantrip resulting in fatal injuries. The other was ejected, sustaining injuries. The company is investigating this incident with MSHA.
Victim, experienced miner working inside fan structure with another ee using grinder 8-10 ft from secure barrier to protect from shaft area. While grinding, other miner noticed ee missing. After search, his body was discovered at shaft bottom. Incident didn't involve non-compliance w/MSHA rules/regs. Investigation ongoing, but appears victim voluntarily jumped to his death
An electrician that was trouble shooting an installation was electrocuted by a single leg of a 3 phase 4160 volt service.
For unexplained reasons, the miner gained access to a secondary road, adjacent from where he was instructed to do road maintenance. Miner removed berm and came too close to road edge, loosing control of equipment and falling through a steep slope, rolling over with the machine. This resulted in miners death. Miner was not wearing seat belt.
EE was operating continuous miner in the #4 heading was cutting right lift. Approx. 25' when top broke starting at the face falling outby into intersection. Positioned on the right side of the intersection miner from kneeling position located between the 3 & 4th row of bolts outby the face. Head and body trauma resulting in death
Employee fell but no one observed his work being performed or his fall. Employee died.
While bolting in the face the left rib failed back from the face and buried the operator.
On Thursday August 16, 2007 an outburst occurred during rescue work on the Main West panel. The outburst occurred in the No. 1 entry inby crosscut #126. Rescue work was ongoing to remove coal and debris which had filled the No. 1 entry during an outburst that occurred on August 6, 2007.
On Thursday, August 16, 2007 an outburst occurred during rescue work on the Main West Panel. The outburst occurred in the No. 1 entry inby crosscut 126. Rescue work was ongoing to remove coal and debris which had filled the No. 1 entry during an outburst that occurred on August 6, 2007.
On Thursday, August 16, 2007 an outburst occurred during rescue work on the Main West Panel. The outburst occurred in the No. 1 entry inby crosscut 126. Rescue work was ongoing to remove coal and debris which had filled the No. 1 entry during an outburst that occurred on August 6, 2007.
EE stated he had been to #3 rock bin to inspect the chute of #4 refuse belt. Witness: EE was on the 1st or 2nd step of a small ladder w/backward fall protection when he "blacked out".*He slipped from ladder landing on feet & fell on his back*. He never lost consciousness. We are waiting for medical records to determine the cause.*On 12/18/07 he had surgery & he died on 12/19/07*
While being lowered in sinking bucket, a strap and clevis engaged with shaft door upsetting the sinking bucket exposing three individuals to a fall hazard resulting in three fatalities.
While being lowered in sinking bucket, a strap and clevis engaged with shaft door upsetting the sinking bucket exposing three individuals to a fall hazard resulting in three fatalities.
While being lowered in sinking bucket, a strap and clevis engaged with shaft door upsetting the sinking bucket exposing three individuals to a fall hazard resulting in three fatalities.
On August 6, 2007 at 2:50 am a bounce/outburst occurred at the Crandall Canyon Mine. It affected the current mining location in the South Barrier of West Mains extending outby to approx. X/C 119. The outburst affected all 4 entries and rescue operations were begun immediately. Rescue operations to reach the miners were unsuccessful.
On August 6, 2007 at 2:50 am a bounce/outburst occurred at the Crandall Canyon Mine. It affected the current mining location in the South Barrier of West Mains extending outby to approx. X/C 119. The outburst affected all 4 entries and rescue operations were begun immediately. Rescue operations to reach the miners were unsuccessful.
On August 6, 2007 at 2:50 am a bounce/outburst occurred at the Crandall Canyon Mine. It affected the current mining location in the South Barrier of West Mains extending outby to approx. X/C 119. The outburst affected all 4 entries and rescue operations were begun immediately. Rescue operations to reach the miners were unsuccessful.
On August 6, 2007 at 2:50 am a bounce/outburst occurred at the Crandall Canyon Mine. It affected the current mining location in the South Barrier of West Mains extending outby to approx. X/C 119. The outburst affected all 4 entries and rescue operations were begun immediately. Rescue operations to reach the miners were unsuccessful.
On August 6, 2007 at 2:50 am a bounce/outburst occurred at the Crandall Canyon Mine. It affected the current mining location in the South Barrier of West Mains extending outby to approx. X/C 119. The outburst affected all 4 entries and rescue operations were begun immediately. Rescue operations to reach the miners were unsuccessful.
On August 6, 2007 at 2:50 am a bounce/outburst occurred at the Crandall Canyon Mine. It affected the current mining location in the South Barrier of West Mains extending outby to approx. X/C 119. The outburst affected all 4 entries and rescue operations were begun immediately. Rescue operations to reach the miners were unsuccessful.
During the change-out of a cutter head torque shaft, employee unexpectedly attempted to pull out a rotating shaft which struck him, causing injuries.
A fall of ground occurred in ME-163V crosscut. A mechanic was parked in the crosscut with pickup TP-74 when the fall of ground occurred, resulting in a fatality. After the fall of ground covered the TP-74, the vehicle caught fire, promting evacuation of the mine.
Contractor (Hooper and Chandler) was removing old tin and installing new tin on top of shop, when employee fell through the roof and landed on the concrete floor causing fatal injuries. The employee fell approx. 28 feet.
Employee was working approximately 550' down in elevator shaft, working off top of elevator. Beam came loose that was thought to be secured. Employee fell from top of elevator to bottom of shaft, resulting in his death.
Drove euclid off bridge, overturned in water, trapped in cab and drowned.
Initial Information: Two EE's working from manlift on West side of mill building over Electrical Room. From initial witness reports, it appears they were in the process of retracting & lowering boom at end of shift with boom fully extended to the South when South side wheels slipped sideways from leveling blocks, causing lift to tilt and capsize. Boom fell, basket hit ground.
Initial Information: Two EE's working from manlift on West side of mill building over Electrical Room. From initial witness reports, it appears they were in the process of retracting & lowering boom at end of shift with boom fully extended to the South when South side wheels slipped sideways from leveling blocks, causing lift to tilt and capsize. Boom fell & basket hit the ground.
Two front end loaders, one on each side, were being used to position an 80 foot section of 18 inch diameter pipe in the waters edge. When the loader on the right was about 25-30 feet from the lake, the bank started to cave in. Within 3 minutes the loader was submerged in about 20 feet of water.
Miner was hit in head by fly rock from blast causing his death.
Employee was getting back on dozer to move for a shot. A co-worker was backing beside the dozer. He struck employee, and ran over him with pickup truck. Employee suffered trauma to his head and chest.
The operator of a 2 yard underground loader received fatal injuries when the loader he was operating fell into a hole. Operator was confirmed deceased 07/02/2007.
EE and other co-workers were trying to connect a 42-in. inlet duct to a top reversal box through an opening in the building. The EE was inside the building between the inlet duct and reversal box. When the inlet duct unexpectedly came through the opening, it struck the injured employee in the head causing severe head injury resulting in death on 6/19/2007.
Employee entered a trench and was struck by a large section of clay when a vertical wall of the trench collapsed.
The deceased was fatally injured when a P&H Omega 20 ton mobile crane tipped on top of him while he attempted to exit the crane. The crane was attempting to postion a de-watering pipe when the accident occured. This accident is still under investigation by MSHA and Hazmat and United Steelworkers.
The truck operator was traveling from the 870 level of the quarry to the waste dump with a load of waste material. The truck left the road, overtraveled a berm and continued down the highwall, rolling over before coming to rest int he quarry. It is believed that the truck operator suffered a medical event and as a result was unable to control the truck as it left the road.