Mining Incidents
Buscar Operadores Minas Alertas Investigación Controladoras Información
English Español
← Volver a la búsqueda

ELLIJAY QUARRY Metal/Non-Metal

Controlada por Vulcan Materials Company
Ellijay, Gilmer Condado, GA  ·  Activa
ID de mina MSHA: 0900927

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en ELLIJAY QUARRY.

Muertes
0
Incidentes totales
9
Años en registro
2000–2022
Último incidente
Oct 2022
Historial de cumplimiento
Citaciones de MSHA desde 2001
28
citaciones
5
significativas y sustanciales
$4,962
multas propuestas
$4,962
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 9,774 0 0 0.0
2025 Q3 2,663 0 0 0.0
2025 Q2 5,795 1 0 172.6
2024 Q4 9,260 0 0 0.0
2024 Q3 1,862 0 0 0.0
2024 Q2 6,142 2 0 325.6
2024 Q1 7,581 0 0 0.0
2023 Q4 8,723 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

9 en archivo

2022 · 1 incidente

20 de octubre de 2022 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Vulcan Construction Materials, LLC · Golpeado por... no clasificado en otra parte

Employee was using a chisel and hammer to remove wear plates on a loader bucket. The chisel dislodged striking employee in the lip causing laceration to the lip.

2020 · 1 incidente

31 de diciembre de 2020 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo EXPLOSIÓN DE RECIPIENTES A PRESIÓN
Vulcan Construction Materials, LLC · Golpeado por... no clasificado en otra parte

Employee was operating a pressure washer when the hose sprung a leak causing a laceration to the employees thumb.

2015 · 1 incidente

2003 · 1 incidente

27 de mayo de 2003 GA · Metal/No metálico SIN VALOR REGISTRADO
Vulcan Construction Materials, LLC · Sin valor registrado

EMPLOYEE WAS PULLING ON A 3/4 RATCHET WRENCH. THE DIRECTION INDICATOR WAS NOT ALL THE WAY IN THE TIGHTENING DIRECTION. THE WRENCH SKIPPED A TOOTH AND THE EMPLOYEE STRAINED HIS BACK. **DID NOT SEEK MEDICAL ATTENTION UNTIL JULY. NO PRESCRIPTIONS OR PHYSICAL THERAPY WERE GIVEN UNTIL LATER AT WHICH TIME IT BACAME REPORTABLE.

2002 · 2 incidentes

30 de mayo de 2002 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo MANEJO DE MATERIALES
Vulcan Construction Materials, LLC · Golpeado contra un objeto fijo

A DRILL BIT ENTERED THE CRUSHING CAVITY OF A SYMONS CRUSHER AND LOCKED THE CRUSHER DOWN. WE USED10'BURNING BARS TO BURN THE BIT OUT. AFTER WE FINISHED BURNING THE EE BEGAN REMOVING THE SMALL PIECES OF THE DRILL BIT THAT WAS LEFT. HE HAD THICK WELDING GLOVES AND WAS THROWING HANDFULLS ATA TIME OUT AS HE WAS THROWING THE TOP OF HIS LT.HAND STRUCK THE CHUTE ABOVE CUTTING HIS LT. HAND

2001 · 2 incidentes

30 de mayo de 2001 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo MAQUINARIA
Vulcan Construction Materials, LLC · Golpeado por... no clasificado en otra parte

EMPLOYEE WENT TO PIT WELD ON HYD HAMMER ON EX 400 TRACKMACHING. HE WENT TO THE OPERATOR AND ASKED HIM TO MOVE MACHINE AWAY FROM WORK AREA. THE EMPLOYEE WALKED BACK TO THE WELDING TRUCK WHICH W AS 50FT AWAY. WHEN THE OPERATOR STARTED TO WALK THE MACHING A SLIVER OF METAL SHOT FROM THE TRACK AREA AND HIT EMPLOYEE IN THE LEFT FOREARM. EMPLOYEE HAD TO HAVE SURGERY AT HOSPITAL.

30 de mayo de 2001 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo MAQUINARIA
Vulcan Construction Materials, LLC · Golpeado por... no clasificado en otra parte

EE WAS WEARING CUTTING GLASSES WHICH LEFT OPEN AREAS FOR FOREIGN MATERIALS TO GET BEHIND THEM. THE EE WAS USING A CUTTING TORCH CUTTING A SHANK OFF OF A BUCKET. THE SLAG POPPED AND A SMALL PIE CVE OF SLAG GOT BEHIND HIS CUTTING GLASSES AND GOT TO HIS EYE. WE TOOK THE EE TO THE ER AND THE DR. REMOVED IT AND SENT HIM BACK TO WORK.

2000 · 1 incidente

13 de enero de 2000 GA · Metal/No metálico Operador de retroexcavadora, Operador de excavadora sobre orugas, Operador de grúa TRANSPORTE MOTORIZADO
Vulcan Construction Materials, LLC · Golpeado por... no clasificado en otra parte

EE WAS DIGGING LEFT CENTER OF SHOT IN FLOOR. HE WAS ATTEMPTING TO MOVE A BOULDER ABOUT 4' UP INTO THE SHOT. WHEN IT MOVED, A SMALL ROCK CAME FROM BEHIND IT AND WENT THRU THE WINDSHIELD. AS THE ROCK CAME THRU HE PUT HIS HANDS UP AND DIRECTED IT TOWARDS THE FLOOR OF THE LOADER. THE ROCK STRUCK HIM ON HIS SHINS AND CUT HIS RIGHT SHIN. IT TOOK 9 STITCHES TO SEW IT UP.