CLEVELAND QUARRY PLANT #31 Metal/Non-Metal

Employee alleges was lifting and pulling some screens at the plant and heard right wrist pop. Employee started losing time on 09/29/22 and then had surgery on 10/18/22. (Late Reporting due to waiting on Dr. notes and information).

Employee alleges ee was hooking up chains to move a conveyor and ee stood up and heard knee pop. Late reporting employee just notified employer on 11/10/17. Employee went to Dr. on 10/23/17 and is now loosing time.

Employee alleges employee was tightening screen bolts and employee turned to walk up some steps and employee slipped on the steps and fell down hurting employee's lower back. Employee starting loosing time on 02/15/17.

Employee alleges ee was standing next to a impactor, which was locked out, washing out rock and mud from rotor. When rotor was freed, foot slipped on wet surface and toes were pinched between the rotors and sidewall of crusher. Employee was wearing rubber boots with steel toes.

Employee alleges he was using a cutting torch to cut a V bolt and he removed his gloves to do something and when he went to grab his gloves the torch burned his right fingers.

Our tech arrived to location where tires are stored. Grabbed the tire needed an as he was moving the tire to the bed of the service truck (using the boom) a hydraulic fitting cracked causing a leak of hydraulic fluid causing the tire to drop form the boom hands. Out technician recognized the danger and moved but, the tire bounced hitting our tech in the leg.

Employee alleges he was putting guards around mini logs and the guards came loose and stuck him in the mouth cutting his lower lip breaking his tooth.

Employee alleges he was using a utility knife to cut rubber and the tip of the utility knife cut his pointy finger on his left hand. He received 3 stitches.

Employee alleges he was getting into the loader and he went to step up into the loader with his left hand on the rail and he twisted something in his lower back. He is seeing a chiro.

Ee states that he had just completed dumping and was turned around to make sure the bed was down on the rails while pulling forward. He hit a rut on the dump pad. The bounce of the seat caused him to hit his head on the top of the rear window frame. He received an abrasion to the head and his neck became sore 2 days later.

Employee alleges he was taking a pin off of brakes with a screwdriver and it slipped and went into his right index finger. Employee punctured his finger and had surgery on 05/10/2007.

EE ALLEGES HIM & ANOTHER EE WAS USING THE LOADERTO LIFT THE 3042 JAW BOULDER BREAKER ONTO A FLATBED TRAILER. HE WAS GIVING DIRECTIONS TO THE OPERATOR & HE SLIPPED ON ICE & THE BUCKET CAME DOWN ON HIS RIGHT FOOT

EE ALLEGES HE STEPPED ON CATWALK PLATFORM AND A PIECE GAVE AWAY AND HE FELL TO THE GROUND LANDING ON HIS FEET. THEN FALLING BACKWARDS FROM PLATFORM APPROX 10" OFF THE GROUND.

EMPLOYEE WAS STANDING ON THE CATWALK WITH HIS HAND ON THE RAIL; A ROCK FELL FROM THE SECONDARYSCREEN AND HIT HIM ON TOP OF HIS HAND.

EMPLOYEE WAS TRAVLEING SOUTH ON IL 84,HE WAS WAITING FOR TURNING AUTOMOBILE WHILE HE WAS STOPPED HE WAS STRUCK IN REAR BY MOVING VEHICLE ALSO GOING SOUTHBOUND.

EE WAS WORKING ON CATWALK, SLIPPED AND FRACTURED HIS ANKLE.

EMPLOYEE WAS MOVING BOOM WHEN THE BOTTOM KICKED OUT THROWING OPERATOR INTO SIDE OF CAB.

ROCK CAME OUT OF TAIL PULLEY HITTING EMPLOYEE'S GLASSES.

EMPLOYEE TRIPPE8 ON ELECTRICAL WIRES ON THE GROUND WHILE HE WAS WALKING AROUND PLANT AREA INSPECTING EQUIPMENT.

WHILE UNBOLTING3COVER PANEL TO REMOVE BAD HYDRAULIC HOSE, EMPLOYEE S HAND SLIPPED OFF OF BOLT AND HE HIT HIS HAND ON THE SIDE OF LOADER.

AS EMPLOYEE WAS3BEGINNING TO MOVE DRILL TO NEW AREA,ROCK FROM UPPER LEDGE DISLOGED,FELL AND STRUCK HIS LEFT SHOULDER.AREA WAS INSPECTED BY SUPERVISORR AND 2 EMPLOYEES BEFORE DRILLING;POSSIBLE ROCK MOVEMENT D6E TO RAPID FREEZE.AND THAW OF ROCK FACE.

EE WAS PULLING STEELS OVER OFF RACK & PULLED MUSCLES IN BACK.

SUPERVISOR I.NAME OF MOLINE CONSUMERS CO PLANT #8 WAS SITTING IN HIS TRUCK WHEN IT WAS STRUCK BY 988-B FRONT END LOADER OPERATED BY I.NAME.PICK-UP TRUCK WAS OWNED BY CLEVELAND QUARRIES,INC.