Central Quarry Metal/Non-Metal

Employee claims EE hurt EE's back while doing maintenance on a crusher.

Employee was cleaning out around the primary area and stepped on wet material and slipped. Employee landed on their lower back, right side on the last step of stairs.

Employee fell while exiting the cab of a roof bolt machine, fracturing their left radius.

Employee was seen at the ER 2:00am on 9/21. EE was diagnosed with flash burns from the welding EE was performing 9/20. EE was given prescription eye drops and was released from the ER.

Employee was bolting out of the basket, rock fell, hitting hand rail of basket, rock rolled over onto employee's left leg, causing a break in 2 places

MSHA was called because of an equipment fire on level 3 of the underground mine.

A high voltage fuse on a power pole controlled by the utility operator blew. The blown fuse continued to spark and burn. The utility provider was contacted but as it took longer than 30 minutes to arrive, notification was made. No injuries or damage resulted from this.

Employee got out of the lube/fuel truck, stepped on a rock, twisted ankle and fell to the ground.

Employee states they were picking up and moving a case of water when the scales went off. Employee went to put the case of water down when they felt a pain in right shoulder. This was not reportable until 10/20/2016.

Employee was putting resin for the bolt on the shelf of the drill when he noticed some discomfort in his right shoulder. He proceeded to bolt and noticed that when he lifted his arms above his head that something was not feeling right

The injured employee was assisting with changing of scalping screen when load shifted smashing his left hand little finger between the plate and frame of the structure.

Injured employee was attempting to shut a chute on a gate using a sledge hammer. Employee missed the gate and hit his right foot causing a contusion.

Injured employee was lifting metal catwalk section when it shifted and smashed hand against catwalk and ground. Causing cuts on two fingers on his right hand.

Material fell from the rib on the level 1 to level 2 decline. The material that fell damaged the conveyor disruping regular mining for more than 1 hour. No injuries or illnessess occurd as result of this accident. There was no immediate danger as no one was in the mine when the event occured. MSHA was notified.

Injured employee was tightening a nut on a hydraulic cylinder and the box end wrench slipped off the head of the bolt. Resulting in a laceration to the left pinky finger

Water run off due to heavy rains in the area caused the water retention areas in the mine to rise. As a precautionary measure the mine was evacuated because water on level 2 of the mine was closed to the base of level 1. two MCC and transformers. There was no immediate danger. MSHA was notified.

Smoke was observed coming from the level 3 motor control center, mine was evaculated and the MSHA Immead. report number was contacted. Prelim. investigation revealed there was no fire. The smoke was the result of a flash arc that had occured. No injuries/illnesses as a result of this incident.

Fall of material from the back on the level 1 to level 2 decline most of the material that fell was caught in the mesh on the back. The loose ground in the mesh above the decline impeded use of the primary escapeway

Employee had a periodic screening chest x-ray read by two "B" readers using ILO procedures. The x-ray was characterized as being consistent with pneumoconiosis with reading of 0/1 and 1/0. Damage or impairment cannot be determined by reading chest films only. This employee will be sent for a comprehensive respiratory examination

The injured employee was on a jaw crusher when he utilized the hyd. rock breaker to break an oversized rock. A rock about the size of a baseball came off boulder and struck employee on the left side of his head.

Injured EE was cutting 18' drill in half to put in loader bucket to move to the right surface. He threw a 9' cut piece into a pile he had started and this piece bounced back and struck his right foot.

The employee was repairing hoses ont he roof bolter and a rock fell from the back and struck his right shoulder and upper arm resulting in a contusion.

Employee was chipping slag & a piece of metal got under his safety glasses and into his right eye.

EE was performing pre-shift inspection on his equipment when a rock fell and struck employee on hard hat, resulting in a concussion

The employee was injured attempting to dislodge a rock from rock box with a scaling bar. While the employee was attempting to dislodge the rock the belt/roller pulled the bar which resulted in his right hand getting caught between the bar & conveyor.

The ee was attempting to raise the bed on a 771 Haul truck. the bed was raised approx. 2 to 3 feet and he stated the bed dropped stricking the frame, resulting in a strained neck.

Unloading a skid of manufactured parts to assemble new equipment. Parts on skid shifted, resulting in a laceration on ee's right hand.

THE EE WAS CONDUCTING PRE-SHIFT INSPECTION ON A KOMATSU PC400 TRACK EXCAVATOR AND STEPPED OFF THE TRACK TO THE GROUND, STEPPING ON A ROCK AND TWISTING HIS LEFT ANKLE.

THE EE WAS ASSISTING IN THE REPAIR OF THE JAW CRUSHER AND WAS CLIMBING DOWN PLATFORM & SCRAPED SHIN ON STEP, RESULTING IN A HEMATOMA ON LEFT SHIN.

WIRE ROPE FAILED AT CONNECTION TO MANBASKET ON EMERGENCY ESCAPE HOIST. ESCAPE HOIST WAS DOWN FOR 2 HOURS WHILE REPAIRS WERE MADE. ESCAPE HOIST/WIRE ROPE WAS RE-CERTIFIED.

THE EE WAS PUMPING WATER OUT OF MINE AND RAN AROUND THE PICKUP AND HIT HIS RIGHT ARM ON THE OPENDOOR.

THE EMPLOYEE EXPERIENCED BLOOD IN HIS URINE WHICH REQUIRED TESTING TO DETERMINE CAUSE. IT WAS LATER DETERMINED THAT OPERATION OF A LOADER CAUSED THE BLOOD IN HIS URINE. THIS WAS DETERMINED ON 8/20/02.

THE EMPLOYEE WAS CLIMBING A LADDER TO SERVICE A CAT 980G LOADER & SLIPPED & FELL FROM LADDER ON HIS BACK.

THE EE WAS DESCENDING A 980 LOADER & HIS FOOT SLIPPED ON THE LADDER & THE RIGHT-CENTER PART OF HIS CHEST HIT THE LADDER.

EE WAS SHOVELING MATERIAL UNDER #2 BELT LINE ANDA ROCK FELL FROM BELT AND HIT ANOTHER ROCK. THE ROCK GLANCED OFF AND STRUCK HIM ON TOP OF RIGHT FOOT.

EE WAS DESCENDING A SCALER & HIS FOOT SLIPPED OFF THE LADDER & FELL TO GROUND LEVEL & STRUCK RIGHT ELBOW ON FLOOR OF MINE

THE EMPLOYEE AND A CO-WORKER WERE LIFTING A PIECE OF DRILL STEEL WHEN THE EMPLOYEE EXPERIENCED BACK PAIN.

THE EE WAS WALKING UNDER BELT #4 ALONG THE WALKWAY WHEN HIS RIGHT FOOT SLIPPED & TWISTED CAUSINGHIM TO STRAIN HIS RIGHT KNEE & ANKLE

THE EE WAS ASSISTING IN SPLICING A BELT AND WAS STEPPING OVER RAIL TO STEPS AND HIS FOOT SLIPPED AND HE FELL.

THE EE WAS ASSISTING IN CHANGING A HYDRAULIC CYLINDER ON AN EXCAVATOR AND IT SLIPPED AND FELL ON HIS RIGHT FOOT.