Mining Incidents

COFFEE LAKE POND Metal/Non-Metal

Controlada por Knife River Corporation
Portland, Washington Condado, OR  ·  Abandoned
ID de mina MSHA: 3503022

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en COFFEE LAKE POND.

Muertes
0
Incidentes totales
11
Años en registro
2000–2022
Último incidente
Oct 2022
Historial de cumplimiento
Citaciones de MSHA desde 2000
122
citaciones
18
significativas y sustanciales
$15,602
multas propuestas
$15,358
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q1 0 1 1
2024 Q3 13,698 3 0 219.0
2024 Q2 13,274 0 0 0.0
2024 Q1 621 0 0 0.0
2023 Q4 1,181 1 0 846.7
2023 Q3 1,086 0 0 0.0
2023 Q2 9,673 0 0 0.0
2023 Q1 620 2 0 3225.8
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

11 en archivo

2022 · 1 incidente

17 de octubre de 2022 OR · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte MAQUINARIA
Knife River Corporation-Northwest · Golpeado contra un objeto en movimiento

DUMP BOX OF HAUL TRUCK BEING OPERATED BY MINER WAS JOSTLED BY EXCIVATOR BUCKET WHILE LOADING MATERIAL. MINER REPORTS NECK AND BACK PAIN.

2017 · 1 incidente

7 de septiembre de 2017 OR · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo MANEJO DE MATERIALES
Knife River Corporation-Northwest · Golpeado por objeto que cae

A miner was changing a tire on a large piece of off-road equipment when the new tire tipped over as it was being staged in an upright position striking their foot. A groove/run beneath the tire contributed to this incident.

2012 · 1 incidente

5 de septiembre de 2012 OR · Metal/No metálico Operario de banco, Cantero MANEJO DE MATERIALES
Knife River Corporation-Northwest · Golpeado por... no clasificado en otra parte

After removing 3'x4' plate steel, tripped on expanded metal protruding from storage rack. Plate steel bounced on concrete striking me on chin, cutting a gash on my chin.

2007 · 2 incidentes

18 de octubre de 2007 OR · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MANEJO DE MATERIALES
Knife River Corporation-Northwest · Golpeado por objeto que cae

Crew was changing a punch plate on an incline screen. While aligning screen, the screen slid down existing deck, hitting employee in the right shin, cutting leg.

17 de mayo de 2007 OR · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte HERRAMIENTAS MANUALES (SIN MOTOR)
Knife River Corporation-Northwest · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Replacing V-Belts on Cedar Rapids screen. Used cable (come-along) to relieve tension on electric motor. Pulled motor back and set. Reached down to remove strap and motor slipped down cutting his hand.

2005 · 2 incidentes

12 de octubre de 2005 OR · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte MANEJO DE MATERIALES
Knife River Corporation-Northwest · Sobreesfuerzo al levantar objetos

Pain started in left shoulder. Moved down arm with pain and numbing. Later progressed around chest and then neck pain. Had X-rays taken, found arthritis and became more painful as days went on. Had MRI and found ruptured disk. No knowledge of exact time of injury to disk.

2 de agosto de 2005 OR · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MANEJO DE MATERIALES
Knife River Corporation-Northwest · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

While unloading a punch plate onto a cat walk the employee's middle finger on his left hand was pinched between one of the punch plate openings and the cat walk hand rail. This resulted in a fracture to the finger.

2004 · 1 incidente

29 de enero de 2004 OR · Metal/No metálico Electricista, Liniero ELÉCTRICO
Knife River Corporation-Northwest · Quemaduras por arco (eléctrico)

EMPLOYEE WAS TROUBLE SHOOTING; FOUND DAMAGE TO BREAKER; USED SCREWDRIVER TO REMOVE PLATE FROM BREAKER TO SEE INFO WRITTEN ON BREAKER. SCREWDRIVER SLIPPED; ARC FLASH BURNED HANDS & FACE. ROOT CAUSE: MOMENTARY LAPSE OF JUDGEMENT.

2001 · 1 incidente

2000 · 2 incidentes

29 de diciembre de 2000 OR · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Knife River Corporation-Northwest · Golpeado por... no clasificado en otra parte

A SOCKET WAS TOSSED UP TO EE AND ACCIDENTLY STRUCK HIS GLASSES, CAUSE THEM TO CUT HIS FACE.

20 de julio de 2000 OR · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo TRANSPORTE MOTORIZADO
Knife River Corporation-Northwest · Golpeado por... no clasificado en otra parte

WHILE WORKING, WENT TO REMOVE A RIPPED PIECE OF CONVEYOR BELTING. WHILE PLANT WAS STOPPING, THE RIPPED BELTING FELL BETWEEN COUNTER WEIGHT AND GOT CAUGHT. THE RIPPED BELTING WAS WHIPPED AROU ND. IT TAGGED THE LOWER LEGS, CAUSING WELTING AND CUTS.