Amrize Conco Western Stone tiene $206K en multas propuestas de MSHA y $534 pendientes en 11 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Amrize Conco Western Stone.
Muertes
0
Incidentes totales
24
Años en registro
1992–2022
Último incidente
Dec 2022
Historial de cumplimiento
Citaciones de MSHA desde 2000
550
citaciones
102
significativas y sustanciales
$205,656
multas propuestas
$187,320
pagado a la fecha
91% de las multas propuestas pagadas a la fecha, una diferencia de $18,336.
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Actividad de inspección
Inspecciones de MSHA desde 2000
176
inspecciones registradas
6,976
horas de inspección
7.9
citaciones por 100 horas de inspección
ⓘEsta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.
550 citaciones en 6,976 horas de inspección.
Fuente: datos de inspecciones de MSHA, actualizados semanalmente.
Amrize Conco Western Stone tiene $206K en multas propuestas de MSHA y $534 pendientes en 11 expedientes impugnados.
Disposicion de multas
ⓘLas diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.
$206K
multas propuestas
$188K
evaluacion actual
$187K
pagado a la fecha
$534
pendiente
544 evaluaciones son ordenes finales; 11 expedientes impugnados.
Al ultimo periodo de evaluacion el 2026-04-21.
Fuente: datos de infracciones evaluadas y de conferencia/litigio de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
ⓘCitaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
14 de diciembre de 2022IL · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoMANEJO DE MATERIALES
An employee was returning a troughing idler into position when it slipped off of the inside of the framework and pinched EE's left thumb in between the idler and the conveyor frame. The employee was taken to the clinic for evaluation where EE was placed on modified duty and given a prescription antibiotic.
24 de octubre de 2022IL · Metal/No metálicoOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorRESBALÓN O CAÍDA DE PERSONA
An employee was dismounting a front end loader when the employee mistook the second from bottom step, for the bottom step. This resulted in a larger than expected step. When the employee stepped down the force from the large step caused a pop in the left knee. After visiting the ER, it was discovered that the employee had broken the tibia.
Around 13:00 a blaster was traveling main haul road and noticed, in a mined out room section of the back had fallen. They immediately reported the situation to the supervisor who went to assess scene with the Plant Manager and Leadman. The area was immediately bermed off and MSHA IR criteria was reviewed. A decision was made it was not immediately reportable. MSHA disagreed.
2017 · 1 incidente
20 de octubre de 2017IL · Metal/No metálicoOperador de scoop tram, Operador de cargue/acarreo/descargueTRANSPORTE MOTORIZADO
Haul Truck Driver misjudged width of entry approaching primary crusher and ran over a concrete block at approximately 5 mph. The truck jostled when it came down off the block causing the driver to strike their head on the window and dislocate the shoulder.
2015 · 1 incidente
5 de febrero de 2015IL · Metal/No metálicoObrero, Cuadrilla, Mensajero de repuestos, Peón, Desconchador de techoMANEJO DE MATERIALES
An employee pinched his index finger on the wheel of a gate valve between the wheel and the valve flange. This resulted in a fracture to the tip of his index finger and two sutures.
2014 · 1 incidente
14 de abril de 2014IL · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoMANEJO DE MATERIALES
4/14/2014 employee was installing a wear plate under a VSI crusher he felt a pop in his right shoulder. Employee was able to continue normal duties, with restrictions. Doctor ordered a MRI, and the employee sustained a rotator cuff tear. July 2,2014, employee had surgery. July 7,2014, doctor would not release him back to work until he saw the employee July 10, 2014,hence the LTI.
2010 · 2 incidentes
8 de septiembre de 2010IL · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaMANEJO DE MATERIALES
While closing a steel door, it fell onto his right foot. He was seen at Mercy Occupational Health and x-rays were taken revealing fractures of the 4th and 5th toes. He was placed in a soft cast brace and instructed in modified duty.
While stepping out of drill, stepped on on a rock that measured 5-6 inches in diameter. Fell down and hurt left ankle. He heard his ankle pop. He was seen at the clinic and treated with an air cast support and modified duty work.
2002 · 1 incidente
16 de marzo de 2002IL · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoRESBALÓN O CAÍDA DE PERSONA
OPERATING ENGINEER WAS PUTTING A 10 FT ROUND STEEL IN RACK OF LM401 HYDRAULIC DRILL AND FELL BACKWARD WITH STEEL STRIKING HIS LEFT FEMUR BONE ON HIS LEG CAUSING A LARGE ABRASION WITH SOME SWEL LING AND ERTHEMA TO THE LEFT UPPER FEMUR AREA. HE WAS ACCOMPANIED TO PROVENA MERCY CENTER IN AURORA, IL WHERE HE WAS X-RAYED AND GIVEN CRUTCHES TO KEEP HIS FULL WEIGHT OFF HIS LEFT LEG.
24 de enero de 2001IL · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoMANEJO DE MATERIALES
1994 FORD P/U TRUCK WENT OVER THE EDGE WITH OPERATING ENGINEER IN IT. OPERATING ENGINEER WAS TAKEN BY ANOTHER LUDWIG EE TO PROVENA MERCY CENTER, OCCUPATIONAL HEALTH SERVICE 1325 N. HIGHLAND AV E, AURORA IL 60506. OPERATING ENGINEER HAD A FEWSCRATCHES ON HIS HANDS. HE WAS RELEASED TO RETURN TO WORK.
INJ WAS LOOSENING HYDRAULIC OIL FILLER PIPE CAP NOT REALIZING IT WAS UNDER PRESSURE. CAP BLEW OFF & HIT INJ IN THE FACE
1997 · 1 incidente
27 de octubre de 1997IL · Metal/No metálicoDinamitero, Disparador, Pegador de tiros, Trabajador de explosivos, Cuadrilla de pólvoraDESPRENDIMIENTO DE TECHO O BÓVEDA
STONE FELL ON WORKER'S L SHOULDER @ 1PM. HE HAD PARAKED EXPLOSIVE TRUCK & WAS IN THE PROCESS OF WALKING TO FELLOW WORKER [DRILLING IN LM401IR HYDRAULIC DRILL]. HE PHONED IN INJURY AT 3PM AFTER SHOULDER BEGAN TO SWELL & HURT. HE DID TELL FELLOW WORKER WHEN HE GOT TO DRILL THAT HE HAD JUST BEEN HIT BY FALLING [1] STONE. MINE PERSONNEL TOOK HIM TO HOSPITAL ER & LUDWIG EXPLOSIVES PERSO
CONDITIONS CONTRIBUTING WERE ONE MAN'S HANDS SLIPPING OFF THE PIPE THEY WERE HOLDING. THE DAMAGE DONE WAS A SEVERE BRUISE TO LEFT TOP FOOT.
23 de julio de 1996IL · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaHERRAMIENTAS MANUALES (SIN MOTOR)
EE WAS USING A UTILITY KNIFE TO CUT A PLASTIC BARREL. HE WAS CUTTING TOWARDS HIMSELF WHEN THE KNIFE PULLED OUT OF THE BARREL AND CUT INTO HIS LEG. UPPER LEFT THIGH.
9 de febrero de 1996IL · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoRESBALÓN O CAÍDA DE PERSONA
INJURED WAS SLIPPING A DRIVE BELT OVER A PULLEY, SUSPENDED WITH A SPUD WRENCH, BY A CO-W0RKER. WHEN INJURED USED HIS FINGERS TO SLIP THE BELT OVER THE SPUD WRENCH, IT SLIPPED CAUSING THE SPRIN G LOADED IDLER PULLEY TO DROP ON THE INJURED'S FINGER, PINCHING IT AGAINST A NEARBY SENSOR HOUSING.
1994 · 2 incidentes
1 de febrero de 1994IL · Metal/No metálicoOperador de minador continuo, Operador de topo de carbónMAQUINARIA
ROOF BOLTER'S DRILL IS UNDERGOING REPAIR. BOLTHOES & BOLT INSTALLATION WAS DONE WITH A JACKLEG WITH THE OPERATOR CLOSE BY. ROOF WAS SCALED BY; HAMMER & HAND, YET ROCKFALL OCCURED DURING HOLE DRILLING. PIECE FELL ON INJURED'S SHOULDER CAUSING SEPARATION, CONTUSION AND ABRASION.
9 de febrero de 1993IL · Metal/No metálicoOperario de banco, CanteroMAQUINARIA
MINER WAS BENT DOWN KNOCKING A BIT OFF A PLUGGED DRILL STEEL, WHEN A ROCK ROLLED OUT OF EXISTING SUPPORT WIRE (WWF) STRIKING HIM IN THE HEAD.
For insurers, brokers, and safety consultants
The full compliance file on Amrize Conco Western Stone
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.