Amrize Nelson Plant Metal/Non-Metal

Non-mining related airplane with 3 people on board crashed into dredge lake 5000 feet away from mining activities. Complete destruction of air plane and 3 fatalities who were pilot and passengers. Impairment impacted production due to the search and recovery of plane and passengers. Airplane passenger was killed as a result of the crash.

Non-mining related airplane with 3 people on board crashed into dredge lake 5000 feet away from mining activities. Complete destruction of air plane and 3 fatalities who were pilot and passengers. Impairment impacted production due to the search and recovery of plane and passengers. Airplane passenger was killed as a result of the crash.

Non-mining related airplane with 3 people on board crashed into dredge lake 5000 feet away from mining activities. Complete destruction of air plane and 3 fatalities who were pilot and passengers. Impairment impacted production due to the search and recovery of plane and passengers. Airplane passenger was killed as a result of the plane crash.

Removing steel throat bushing from Slurry pump housing. Hung up with 1/4" to go. Used left hand to push the top to free it. Came lose tipped back on the chain hoist supporting it and pinned left elbow on pump housing, simultaneously bending left hand back so fingers touched the top forearm. Diagnosis: Closed acute non-displaced intra-articular radial styloid fracture.

Employee parked haul truck, and was dismounting at the end of shift. Employee missed the bottom rung with right foot, and landed on the ground buckling right knee resulting in a strained right calf.

While installing skirting on the tail section of a radial stacker, the employee felt a strain to his back. Medical attention was sought by the EE on 11/9/2014. On 11/10/2014, the EE informed mine management of medical attention provided over the weekend on 11/9/2014. Injury accepted 11/10/2014.

While employee was performing conveyor belt replacement, employee cut through belt with utility knife, cutting leg.

Employee sliding wear plate into place with a coworker. In the process, employee turned ankle causing a sprain.

Employee used utility knife to open 5 Gal oil container. While opening, employee cut towards himself with knife. The bucket slipped in the process and he cut his hand. Employee received stitches and returned to work.

Removing bearing from conveyor and a small fragment of metal stuck in finger of repair person.

While repairing springs on hopper gate, it wouldn't shut, so he lifted it and it slammed shut on his right hand index finger.

Employee was closing a garage door and caught his finger in a pinch point. The tip of the left middle finger was cut off.

EE WAS LOWERING COUNTERWEIGHTS ON LONG BELTS. THERE WAS STORED ENERGY IN BELT CAUSING HOIST LEVER TO SWING HITTING EE ON LEFT ARM.

WHILE LIFTING A SECTION OF PIT CONVEYER WITH CRANE SECTION CAME LOOSE FROM CRANE AND HIT EE TOO QUIKLY IN HEAD. HE WAS WEARING HIS HARD HAT.

LOADING 55 GAL BARRLES INTO LOADER BUCKET. BARREL TIPPED QUICKLY PINCHING FINGER BETWEEN BARREL AND BACK OF BUCKET.

DRILLING THROUGH RUBBER IMPACT PLATE WITH 1/2" DRILL, THE DRILL CAUGHT AND INJURED HIS RIGHT RING FINGER.

EE PINCHED FINGER BETWEEN WRENCH & PUMP.

WALKING ON PILE OF USED 12" WASTE PIPELINE SLIPPED AND FEL ON CHEST BRUISING RIBS.

CUTTING BELT WITH KNIFE. SLIPPED CUTTING LEG.

STEPPED ON EXT. CORD TWISTING R FOOT.

EE WAS WORKING ON WINCH HE BRUMPED KNEE WHILE WALKING AROUND.

CHANGING OUT HOIST MOTOR.

EMPLOYEE WAS HELPING TO PUT UP A SIGN AND WAS CUT.

EMP WAS CONNECTING CONVEYORS AND STRAINED LEFT SHOULDER.

EE WAS CARRYING STEEL AND STRAINED MUSCLE IN RT ARM.

EMPLOYEE WAS WALKING OUT TO START WORK,WHILE CLIMBINGA SHORT LADDER HE PULLED MUSCLE IN LEFT SHOULDER.

EMPLOYEE SLIPPED WHILE CLIMBING LADDER BRUISING TAIL BONE.

EMPLOYEE WAS TIGHTENNING BELT SCRAPER WHEN HE PINCHE DRIGHT INDEX FINGER.

A PLANK USED AS WAY TO BOARD & UNBOARD DREDGE PLANK WAS NOT STRONG ENOUGH TO CARRY THE WEIGHT OF TWO PEOPLE & BEARING & HOUSING HIT HIS THIGH.

PLANK USED AS WAY TO BOARD & UNBOARD DREDGE. PLANK WAS NOT STRONG ENOUGH TO CARRY WEIGHT OF TWO PEOPLE & BEARING & HOUSING HITTING HIS CALF.

EE WAS USING RATCHET AND CHEATER BAR TO LOOSEN LUG BOLTS ON DOZER TIVE DIM WHEN SOCKET ADAPTOR BROKE LOWER BACK STRAIN.

EE WAS GETTING OFF OF FRONT END LOADER HE STEP BACKWARDS TRIPPING OVER CRUSHER HEAD NUT WITH EYE BOLTS IN IT.

I.NAME GOING TO LOWER WINCH ON COUNTER WEIGHT. BELT TAKE UP. WHEN WINCH LET LOOSE. CRANK HANDLE ON WINCH CAME AROUND HITTING EMPL ON CACK OF LEFT HAND.

HE GOT OFF LOADER TO GO TO THE BATHROOM NEXT TO LOADER BUCKET WHILE BUCKET WAS IN BANK FACE. BANK SLIDE- INJURY RIGHT KNEE.

WHILE EE TO REPLACE WOREN TUMBLER FROM DRIVE SHAFT HAD SHAFT STANDING ON END SO THUMBLER COULD SLIDE DOWN SHIFT. STANDING WITH FEET TO CLOSE TO TUMBLER WHEN TUMBLER CAME LOOSE AND FELL HITTING TOP OF FOOT.

CHANGING SCREEN BEARING PUTTING PULLEY ON SHAFT WHEN HE FOUND PULLEY WAS IN TO FAR HAD TO REMOVE PULLEY PULLEY BECAME STUCK HAD TO HIT PULLEY WITH HAMMER TO MAKE IT MOVE IT CAME LOOSE. PULLEY WAS TO HEAVEY FOR OTHER HAND TO HOLD FALLING ON ARM.

HE WAS GOING TO CHECK ENGINE OIL ON 380 WHEEL DOZER. HE USED THE TIRE LUGS AS A LADDER TO GET TO ENGINE. SORE LOWER BACK STRAIN WHEN HE SLIPPED AND FELL TO THE GROUND.

INJURED WAS ASSEMBLING CONVEYOR TRUSS WHEN HIS THUMB WAS PINCHED BETWEEN CONVEYOR END PLATES.LOADER MOVED CONVEYOR WHEN INJURED WAS GETTING OLD BOLT OUT OF HOLE.

INSTALLING TRANSMISSION SPOOL VALVE WITH SPRING PRESSURE ON VALVE & COVER WHEN COVER SLIP THE SPRING UNLOADED SENDING COVER AIRBORNE TO I NAME FOREHEAD CUTTING SKIN STHAT NEEDED 3 STITCHES

HEATING SHEET METAL WITH HEATING TORCH.

PUTTING BEARING IN HOUSING OTHER EMOP DRIVING IT WITH HAMMER AND PUNCH, CHIP FLEW OFF HIT IN EYE

CLIMBING DOWN FRONT END LOADER LADDER STEPS BUMPED AND STRAINED KNEE

I NAME HIT LEFT HAND WITH HAMMER WHILE DRIVING PIN FROM ROLLER CHAIN CUTTING HAND

I,NAME INJURED BACK WHILE REPARING HYDRALIC HOSE.

HE FELL WHEN GETTING OFF THE CONVEYOR BELT.

I,NAME WAS GETTING OUT OF CAT D-9 DOZER DURING RAIN AND SLIPPED - SPRAINING RIGHT ANKLE.

HE STRAINED HIS BACK MUSCLES WHILE TRYING TO ADJUST A COUNTER WEIGHT WINCH.

HE STRAINED HIS LOWER BACK MUSCLE WHILE USING A WRENCH ON THE JAW CRUSHER.

HE STRAINED HIS LOWER BACK MUSCLE WHILE USING A COME A LONG TO PULL WITH.

HE HAD A BATTERY EXPLODE WHILE HE WAS WORKING ON IT.

I.NAME WAS DOING SOME REPAIR WORK IN HEADBOX & WHEN GETTING OUT HE FELL & HIT A STEEL BEAM WITH HIS RT.BUTTOCKS CUTTING IT

I.NAME WAS REPAIRING AN AIR RAM LEAK WHEN HE CAUGHT HIS RT.MIDDLE FINGER IN THE AIR RAM WHILE OPENING IT

HE WAS BEING TR5INED ON AN OLD CAT DOZER. WHILE BEING TRAINED HIS LITTLE FINGER ON RIGHT HAND WAS FRACTURED. IT WAS SLAMMED IN THE DOOR.

I NAME WAS UNLOADING STEEL FROM A DELIVERY TRUCK WHEN A PIECE OF STEEL HIT HIM IN THE UPPER ARM REQUIRING STITCHES. I NAME REMOVED THE STITCHES HIMSELF