Amrize Larson Plant Metal/Non-Metal

EE was putting a piece of steel in the steel dumpster and it caught onto EE's glove, causing EE's right ring finger to get smashed between 2 pieces of steel.

EE fell off a trailer while unloading a screw. The accident was noted but no action taken at the time. In December ee went in for a hip replacement surgery that resulted from earlier fall that caused a broken femur.

EMPLOYEE WAS MANUALLY MOVING ROCK THE SIZE OF A BASKETBALL FROM ATOP A CRUSHER WITH GLOVED HANDS. WHILE PICKING UP THE ROCK TO THROW TOWARDS CRUSHER HOPPER, ROCK SHIFTED AND PINCHED LEFT INDEX FINGER BETWEEN ROCK AND HINGE. RESULTS WAS BROKEN LEFT FINGER TIP AND 5 STITCHES ON FINGER.

Worker was repairing a sand screw. Employee was with another worker pulling a steel flight back into place with a come-a-long when the steel that the come-a-long was hooked to broke and flew back cutting the employees lower left jaw area. employee required 8 stitches.

Worker was repairing a sand screw. EE was with another worker pulling a steel flight back into place with come-a-long when the steel that the come-a-long was hooked to broke off and flew back puncturing the employee's left upper lip area. EE required 3 stitches.

EE injured left shoulder by propping himself up by his elbows on armrests in loader to avoid bumpy conditions.

While opening the tailgate to a F250 pickup truck, the employee felt a "pop" in his right arm - biceps tendon.

EE was switching a flop gate, the wrench he was using slipped off. EE fell and caught himself with his left hand resulting in a injured shoulder.

Employee was standing on top of skidsteer while lifting a counterweight system into place. He slipped and fell, landing on his back. He initially could do all his duties. He had not been working but felt as his back was getting better. He went to his doctor and his doctor took him off work on 8/28/07.

Employee stepped out of manlift and slipped. He grabbed on to the conveyor belt to stop himself from falling. He ruptured the tendon in his right bicep.

While putting on additional wraps to the timber head, a sudden release of tension on the rope occurred. This caused injury to both hands and left arm.

WHILE GRINDING OFF OLD CLIPS, GRINDER SLIPPED & CUT FINGER.

WALKING DOWN STOCKPILE AND PULLED HAMSTRING.

REPAIRING A CRUSHER, AS HE WAS SWINGING A SLEDGE HAMMER HE GOT HIS RIGHT INDEX FINGER CAUGHT BETWEEN THE HANDLE OF THE HAMMER AND A STEEL PLATE.

LIFTING A ROLLER ONTO A NEW SECTION OF CONVEYOR. THE ROLLER SLID DOWN PINCHING LEFT INDEX FINGER. THE FINGER WAS TORN AND SMASHED REQUIRING SUTURES.

EE WAS INSTALLINT RETURN ROLLER ON CONVEYOR BELT THERE IS A METAL SLOPE UNDER CONVEYOR BACK WAS SITTING ON SLOPE AND STARTED TO SLID DOWN REACH UP AND BEAM AND PULLED MUSCLE IN LOWER BACK.

TIGHTEN 6" NUT OVERHEAD WITH PIPE WRENCH, SLIPPED AND HIT FINGER AND WRENCH AGAINST CRUSHER WALL.

DOOR OF CRUSHER 34 SWINGING SLEDGE HAMMER TO BEAT ON ROLL TO TURN AND OTHER EMPLOYEE WAS IN CRUSHER WITH PIPE WRENCH TRYIN GTO TURN ROLL.

LAYING ON BOW. END OF BARGE AND REACH DOWN TO HHOK. SCHUEL ON CABLE ABOUT 4 1/2 FT HE PULL MUSHEL IN BACK. SLIDE LINE LINER ON TO BARGE TO HODL IN EASE CHAIR BRAKE.

EE WAS BACKING UNDER THE SHOVEL BUCKET TO GET A LOAD OF ROCK AND EE BLEW HORSE STOP AND EVE ROLL BACK AND HIT BUCKET.

IN CHANGING OUT HOIST CABLE EMPLOYEE WAS PULLINGSIDEWAYS ON WRENCH TO TIGHTEN CLAMPS FOR CABLE. FELT PULL IN HIS BACK BUT FINISHED SHIFT.

LIGHTNING STRUCK R.O.P.S. ON LOADER WHILE OPERATOR WAS IN MACHINE.

DESCENDING A SET OF STAIRS, HE PLACED HIS FOOT DOWN ON AN UNEVEN PLACE AT GROUND LEVEL. THIS CAUSED HIS ANKLE TO TURN AND SPRAINING IT.

I.NAME HOLDING ONTO A PIECE OF EQUIPMENT BEING LIFTED.THE LIFTING CHAIN BROKE AND I.NAME FELL BACK LANDING ON HIS BACK AND HEAD ON QUARRY FLOOR.

STEPPED DOWN FROM HIS HAUL TRUCK LADDER ONTO A BURN WITH LOOSE ROCK ON IT. WHEN HE LET GOT OF THE LADDER HIS FEET SLIPPED OUT FROM UNDER HIM.

INJURED WAS TAKING BROKEN REDUCER OFF THE SHAFT.HE HAD THE FRONT COVER OFF AND HAD SPLIT THE BUSHING.INJURED THOUGHT HE COULD HANDLE THE OTHER HALF OF THE REDUCER WHEN HE PULLED IF OFF.IT CAME OFF HE REALIZED THAT THE WEIGHT WAS MORE THAN HE SHOULD HANDLE AND PUT IT DOWN.

EE ALLEDGES THAT OPERATING A LOADER FOR YEARS HAS CAUSED THE PAIN HE HAS IN HIS HAND WRIST & SHOULDER DOC HAS EE WEARING A WRIST BRACE & ON 06-01-92 DETERMINED THAT EE HAS BURSITIS

EE COMPLAINED ABOUT TINGLING IN HIS HANDS HE HAD BEEN TIGHTENING CRUSHER BOLTS THE DAY BEFORE BY SWINGING A SLEDGE HAMMER.

I NAME WAS HOLDING A CHUTE THAT WAS PROPPED UP & HAMMERING ON A GATE THAT WAS NOT CLOSED COMPLETELY THE CHUTE THAT WAS PROPPED UP FELL DOWN & PINCHED I NAME FINGERS

EE WAS HOLDING ONE END OF A BELT WIPER AS EE WAS WELDING THE OTHER END. WHEN THE WIPER WAS SUPPOSED TO BE TACKED IT FELL AND CAUGHT HIS WRIST ON TOP OF THE SCREEN BOX.

I.NAME CLEANING UP AROUND CONVEYOR IN TUNNEL WHEN HE SLIPPED AND GOT RIGHT ARM CAUGHT BETWEEN IDLER AND CONVEYOR BELT.X-RAYS SHOWED NO BROKEN BONES BUT ARM WAS SORE WITH SMALL ABRASIONS.

I.NAME GOT A FOREIGN OBJECT IN LEFT EYE.

HE WAS REMOVING3SHOVEL CABLE AND IT SLIPPED ON END, HITTING HIM ON CHIN.