Brooksville Cement Plant Metal/Non-Metal

EE was inflating a tire on a 863 bobcat utilizing a ratcheting strap to seat the tire to the wheel. When the strap was released it re-coiled upward striking the employee's forearm requiring 8 stitches to close.

While operating a walk-behind concrete saw, a rock jammed the saw wheel. Employee reached to remove rock and his sleeve was caught on saw arbor causing forearm to contact blade.

While cutting steel bands off a pallet, the steel band recoiled back and cut the left arm just above the wrist.

EEs were replacing supporting pipes for head protection inside the "kin riser". Debris came loose, struck EE on the head and shoulder, knocking his hard hat off and causing a contusion on his shoulder. Another piece then fell and struck his head, he was wearing a Tyvek suit hood and a head sock. He was treated and released from the hospital.

Employee was operating a vacuum truck suction hose. While in the process of cleaning he was holding the 8" hose with his left hand and maneuvering the hose with his right hand. The hose turned and engulfed his left arm in the hose causing a negative suction to his arm.

In the process of adding grinding balls to the coal mill, the drum containing the grinding balls tipped over striking right arm against metal chute.

Employee was cleaning out a plug in the nextor hopper (massary additive) by standing on a platform and digging into it with a shovel. When ee returned to the lab, she compalin of back pain when she breathed. The dr prescribed pankillers and muscle relaxers for her muscle sprain and gave her a release to came to work.

Employee was closing a port door on a preheater tower. The hinged section of the port door was stuck, requiring more force to be applied when closing. As the hatch closed, his hand slipped causing a laceration to the finger requiring 4 stitches.

Employee was installing a chute on a clay conveyor. While maneuvering the chute into place, his hand was caught between two pieces of steel. This caused three fingers on his left hand to be smashed, resulting in contusions to fingers.

Employee tripped on a 1/2 inch raised portion of walkway grating. The fall resulted in a small laceration to her knee.

Employee was using a pry bar to close the bottom door of a cement railacar. His hand slipped from the pry bar, causing him to lose his balance, and twist his ankle. This resulted in a sprained ankle.

Employee was kneeling down on top of a metal tank performing electrical repairs to a bindicator. When he stood to leave the area, he felt a pain in his right knee. He requested medical attention the next day ad was seen by the emergency room physician who referred him to our regular WC physician who placed him on restricted duites.

Employee was manually pulling welding cables from the ground floor to an elevated platform when he felt a pain in his lower back. He requested to see a physician on 2/13/2007. He was returned to work with some restrictions until further evaluation. Restricted duties began on 2/14/2007.

Employee was cleaning the discharge screen of a finish mill. The screen was plugged with hardened cement. As the particles broke loose from the screen, material blew into the employee's eyes. One eye sustained a minor corneal abrasion, requiring prescription of an antibiotic ointment and restricted duties for one day.

Employees were working in the roll mill, the wind blew some cement dust and it got into EE's right eye. He rinsed it at an eyewash station, but still felt something in his eye, so he was taken to get it looked at by a physician.

Employee was standing beside a stack of metal plates when the stack tipped, trapping his left foot under one of the plates.

Employee was removing a pipe cap with a large pipe wrench when his hand slipped from the wrench. This caused him to stumble and fall, subsequently twising his ankle. The fracture to the ankle required surgery.

Employee was assisting in an electric motor change. He attempted to lift the motor and caught his finger on a protruding bolt on the bottom of the motor, resulting in a laceration to his finger.

While the employee was removing rocks of approximately 20lbs from a hopper, his right thumb was caught between the hopper edge and the rock.

Employee tripped over a pallet on the floor of the maintenance shop. Placed his hand out to catch his fall, and injured right wrist.

EE was operating a cement bag packing machine. As a bag was filling, the bag ruptured, blowing cement dust onto the ee. The ee was wearing safety glasses and a face shield at the time. Some cement dust entered the ee left eye, causing irritation.

EE injured knee while working behind maintenance shop. The employee tripped over a pallet and twisted his knee. After evaluation, he returned to work. He had surgery while off work from a non-work related medical condition. Upon release by his dr, he RTW with no restrictions. EE continued to feel discomfort & was sent for further medical evaluation. Light duty began 4/10/2006.

A NEARBY EMPLOYEE WAS USING AN 8 LB SLEDGEHAMMER TO REMOVE A SHAFT. THE INJURED EMPLOYEE WALKED BEHIND THE EMPLOYEE USING THE SLEDGEHAMMER AT THE MOMENT HE PUT THE SLEDGEHAMMER TO REST ON HIS SHOULDER. THE INJURED EMPLOYEE WAS HIT ON TOP OF SHOULDER WITH THE HAMMER. THE BLOW WAS WITH MINIMAL IMPACT, BUT CAUSED SLIGHT BRUISING.

EE WAS INSTALLING A DRIVE BELT ON A SHEAVE. FINGER WAS CAUGHT BETWEEN THE DRIVE BELT AND THE SHEAVE. SHEAVE GROOVES WERE WORN, CAUSING THE EDGES TO BE SHARP. FINGER WAS SEVERELY LACERATED WHEN PRESSED INTO THE GROOVE OF THE SHEAVE.

EMPLOYEE WAS WORKING INSIDE A FINISH MILL REPLACING LINERS. A SCAFFOLD BOARD HAD BEEN INSTALLED APPROX. 3'HIGH TO INCREASE THE REACH TO THE TOP OF THE MILL. THE SCAFFOLD BROKE, CAUSING EE TO FALL. THE EE LANDED ON HIS FEET & BRUISED RT. HEEL.

EMPLOYEE WAS PLACING A LADDER BELOW THE OPENING OF A FINISH MILL IN PREPARATIONS TO ENTER THE MILL. EE STEPPED ON A MILL BALL, SLIPPED & STRUCK HIS SHOULDER ON THE GROUND. RECEIVED FIRST AID, ICE COMPRESS. (2)DAYS LATER, WAS REFERRED TO DR. FOR FURTHER TREATMENT.

THE EMPLOYEE WAS DESCENDING STAIRS INTO A BUCKET ELEVATOR HOLE TO PERFORM REPAIRS. HE SLIPPED ON THE STAIRS & TWISTED HIS RT.KNEE. HE RECEIVED FIRST AID (ICE PACK), BUT NO RELIEF FROM THE PAIN AFTER 2 DAYS. SOUGHT MEDICAL ATTN. ON 6/18/04 WAS GIVEN RESTRICTED WORK DUTIES.

THE EMPLOYEE WAS EXITING THE OPERATOR'S CAB OF A BOBCAT SKID-STEER LOADER. WHEN HE STEPPED FROM THE LOADER HE STEPPED ON A ROCK & TWISTED HIS ANKLE.

EE WAS WORKING ON CEMENT FINISHED PRODUCT COOLING TOWER. SOME CEMENT DUST FELL FROM ABOVE & WENT INTO EYES.

EE WAS PERFORMING NORMAL REPAIR DUTIES. WINDY CONDITIONS CAUSED DUST TO BECOME AIRBORNE IN THE WORK AREA AND GET INTO HIS EYES. EE WAS WEARING SAFETY GLASSES.

Employee was welding, torching & grinding on 3/13. The next day he thought he might have burned his right eye welding. Employee returned to TN from FL on 3/17, right eye had gotten worse, went to doctor on 3/19 and it is believed that he got debris in right eye while grinding, which caused infection.

EE was changing out a damaged screw auger. the old screw was lying on the floor adjacent to the immediate work area. the ee stepped back onto the screw auger and tripped, falling onto the auger. the screw auger scraped his lower back slightly. the ee felt o.k. at the time but began experiencing lower back pain by the 25th of march.

EE WAS USING A JACKHAMMER TO REMOVE HARDENED MATERIAL. WHEN HE PULLED THE JACKHAMMER TOWARD HIS BODY, THE JACKHAMMER BIT CAME OUT AND FELL ON HIS LEFT INDEX FINGER.

EE WAS CLOSING THE INSPECTION DOOR OF THE DISCHARGE END OF A RAW MILL. THE EE'S THUMB WAS CAUGHT IN THE DOOR AND WAS BRUISED AND SCRAPED.

EMPLOYEE SLIPPED ON MATERIAL ON THE GROUND AND FELL INTO A NEARBY WALL. INJURY REPORTED IMMEDIATELY & TREATED AS FIRST AID INJURY. THE EMPLOYEE CONTINUED TO EXPERIENCE DISCOMFORT AND DESIRED T O SEEK MEDICAL ATTENTION ON 1/14/04 - BECAME REPORTABLE ON 1/19/04.

EE WAS WORKING ON A CEMENT AIRSLIDE CONVEYOR. THIS IS AN AIR ASSISTED GRAVITY CONVEYOR FOR FINISHED CEMENT PRODUCT. WHEN HE REMOVED A COVER ON THE AIRSLIDE, THE MATERIAL INSIDE PURGED OUT ON TO HIM COVERING HIS FACE AND EYES WITH MATERIAL AND KNOCKED HIM DOWN ONTO THE STEEL PLATFORM WHERE HE WAS STANDING ON A 4 FT LADDER.

EE WAS WORKING WITH ANOTHER EE ON A CEMENT AIRSLIDE CONVEYER. WHEN THE EE'S REMOVED A COVER ON THE AIRSLIDE, THEY WERE HIT WITH A QUICK BURST OF MATERIAL CONTAINED IN THE AIRSLIDE. THE EE'S EYES WERE FILLED WITH FINISHED CEMENT PRODUCT.

EMPLOYEE WAS CLOSING A HEAVY INSPECTION DOOR TO A BUCKET ELEVATOR. WHILE HE WAS PUSHING THE DOOR, HE SLIPPED ON LOOSE MATERIAL AND TWISTED HIS RIGHT KNEE.

EMPLOYEE REMOVED THE CAP FROM AN INSPECTION COVER ON A CEMENT AIRSLIDE. THE MATERIAL PURGED OUT OF THE OPENING AND GOT IN HIS EYES.

EE WAS CUTTING OPEN A PALLET WHEN THE KNIFE SLIPPED AND MADE A SMALL PUNCTURE TO HER FOREARM.

EMPLOYEE WAS MOWING THE LAWN ON A RIDING MOWER WHEN HE STRUCK A LOW-LYING BRANCH WITH HIS HEAD. THIS CAUSED SOME DISCOMFORT IN THE NECK OVER THE NEXT FEW DAYS.

EE WAS APPLYING LUBRICANT TO THE SURFACE OF A KILN TIRE THE AREA WAS HOT AND THE EE WAS OVERXPOSED TO THE HEAT. HE EXPERIENCED DIZZINESS AND FATIGUE. HE WAS REMOVED FROM THE AREA AND TREATED F OR HEAT EXHAUSTION.

EE WAS CLOSING INSPECTION DOORS ON A PREHEATER TOWER USING A SLEDGEHAMMER. THE DOOR & THE LATCH WERE EXPOSED. THE EE TRIED TO STOP THE SWING BUT WAS UNABLE. HIS FINGER WAS CAUGHT AGAINST THE LATCH CAUSING A SMALL LACERATION TO HIS RT.INDEX FINGER.

EE WAS MONITORING THE CLEANING PROCESS OF A LARGE DUCT. MATERIAL FELL DOWN INSIDE THE DUCT. CREATING A VIBRATION THAT DISLODGED SOME MATERIAL BUILD-UP ON THE OUTSIDE OF THE DUCT. THE MATERIAL FELL STRIKING THE EE ON THE BACK OF THE NECK AND UPPER SHOULDER AREA.

EMPLOYEE WAS PERFORMING NORMAL DAILY DUTIES OF TYPING, FILING, AND STOCKING OFFICE SUPPLIES. SHE FELT A PAIN IN HER RIGHT WRIST AS SHE WAS MOVING SOME BOXES. LATER IN THE EVENING THERE WAS A NOTICEABLE SWELLING IN THE WRIST ALONG WITH A BURNING SENSATION.

EE WAS WORKING ON AN ELECTRIC MOTOR ON A PLATFORM AT THE INLET OF A RAW GRINDING MILL. THE EE TURNED AROUND TO EXIT THE PLATFORM AND TRIPPED OVER MATERIALS IN THE WORK AREA. AS HE FELL HE PUT HIS RT. HAND OUT TO CATCH HIMSELF AND CAUGHT HIMSELF AND CAUGHT HIS FIFTH FINGER ON THE WALL BESIDE HIM.

CHANGING OUT IDLER WHEEL ON THE AXLE INSIDE COOLER. PUT KNEE BAR IN HOLE TO SEPARATE WHEEL, IT BROKE LOOSE AND THE SHARP END OF THE KNEE BAR WENT INTO HIS HAND.

EMPLOYEE WAS WORKING APPROXIMATELY 3 FEET FROM THE GROUND ON A LADDER. HE WAS ATTEMPTING TO UNPLUG AN AIRSLIDE. WHEN THE MATERIAL BEGAN TO FLOW, HE WAS OVERCOME BY DUST AND IN AN EFFORT TO GET AWAY, HE JUMPED DOWN AND AWAY FROM THE LADDER. IN DOING SO, HE STRUCK HIS UPPER BODY AGAINST SOME WATER PIPES.

EE WAS GRINDING ON KILN IN CEMENT PLANT. DUST FELL BEHIND HIS SAFETY GLASSES & ENTERED HIS RIGHT EYE. HE DID NOT SEEK MEDICAL ATTENTION UNTIL 12-24. PHYSICIAN INDICATED RETURN TO WORK 12-28.

EE WAS JACKHAMMERING ON A PIECE OF LODGED CLINKER MATERIAL. HE FELT A BURNING PAIN IN HIS LEFT EYE SHORTLY AFTER PERFORMING THIS TASK. HE WAS SENT TO AN EYE CLINIC WHERE HIS EYE WAS FLUSHED OU T AND HE WAS GIVEN SOME DROPS TO RELIEVE THE PAIN.

EE WAS OPERATING A TRACKMOBILE COUPLED TO AN ENCLOSED RAILCAR. WHEN THE TRACKMOBILE WAS UNABLE TO ADEQUATELY BRAKE THE RAILCAR, IT BEGAN TO SLIDE AND COLLIDED WITH ANOTHER PARKED RAILCAR. UPON IMPACT, THE EE HIT THE LEFT SIDE OF HIS FACE AND HEAD ON THE WINDOW AND FRAME OF CAB. FIRST AID ONLY UNTIL 12/2/02.

EE WAS MONITORING MATERIAL FLOW IN A PREHEATER TOWER. THE TOWER SHIFTED AND PARTIALLY COLLAPSED CAUSING SOME STRUCTURAL DAMAGE AND FALLING DEBRIS IN THE AREA WHERE THE EE WAS STANDING. HE WAS STRUCK ON HIS RIGHT ARM AND HAND BY THE FALL DEBRIS. HE RECEIVED MEDICAL TREATMENT INCLUDING 3 STITCHES TO HIS RIGHT RING FINGER.

EE WAS CUTTING A PIECE OF RUBBER HOSE WITH A UTILITY KNIFE. WHEN THE KNIFE WENT THROUGH THE HOSE, IT STRUCK LEFT INDEX FINGER ON HIS LEF HAND.

EE WAS STEPPING DOWN AND BACK WHILE CLOSING THE HOOD ON THE WATER TRUCK WHEN HE FELT A PAIN IN THE BACK OF HIS RIGHT LEG. AFTER TWO DAYS A BRUISE WAS APPARENT ON THE BACK OF HIS LEG SO HE WAS REFERRED TO A DR. WHERE IT WAS DETERMINED HE HAD PULLED HIS HAMSTRING.

EE WAS CLEANING A BOBCAT LOADER. THE LOADER BUCKET WAS IN A RAISED POSITION & WAS NOT BLOCKED OR SUPPORTED. THE EE WAS CLEANING INSIDE THE CAB & PRESSED THE FOOT CONTROL LEVER ALLOWING THE BUC KET TO SLOWLY BLEED DOWN & PINNED HIM BETWEEN THE BUCKET & THE FRAME OF THE MACHINE.

INJURED EE WAS REMOVING GRATING AT A RAIL CAR UNLOADING HOPPER. THE GRATES HAVE LIFTING BRACKETS ATTACHED THAT SLIDE UP TO ALLOW THE FORKS OF A FORKLIFT TO BE INSEERTED FOR LIFTING. THE EE WAS HOLDING THE LIFTING BRACKETS UP TO ALLOW ANOTHER EE TO INSERT FORKLIFT WHEN HIS LEFT THUMB BECAME TRAPPED BETWEEN THE BRACKET AND THE FORK.

EE WAS CARRYING A 50 LBS TEST WEIGHT DURING A CALIBRATION PROCEDURE FOR A WEIGHT FEEDER. HE SLIPPED ON MATERIAL BUILD-UP AROUND THE SCALE AREA. WHEN HE SLIPPED HE FELT A PAIN IN HIS LOWER BACK

EE WAS WORKING ON A LIMESTONE FEEDER CHAIN. WHILE USING A CUTTING TORCH, A PIECE OF SLAG POPPED OFF AND BURNED LEFT KNEE CAP. THE EE ALSO HAD SOME BRUISING TO THE KNEE FROM CRAWLING ON HTE LIM EROCKS.

EE WAS BAGGING CEMENT WHEN A BAG BROKE. INSTEAD OF LETTING THE BAG FALL TO THE CONVEYOR BELOW, HE REACHED DOWN AND TRIED TO TEAR THE BAG OPEN TO EMPTY THE CEMENT INTO THE HOPPER BELOW THE CONV EYOR. WHEN HE PULLED ON THE HEAVY BAG OF MATERIAL, HE PULLED THE MUSCLES IN HIS LOWER BACK.

THE EE WAS CARRYING A HEAVY OBJECT UP A STAIRWELL TAKING TWO STEPS AT A TIME. HE WAS CARRYING THE LOAD IN FRONT OF HIS BODY. HE FELT A PULL INHIS BACK AS HE REACHED THE TOP OF THE STAIRS.

EE WAS POUNDING ON A HARDENED STEEL SPROCKET WITH A HAMMER WHEN A PIECE OF METAL FLEW OFF AND LODGED IN HIS LT. INDEX FINGER.

EE WA WORKING INSIDE A RAW MILL. WHEN HE STEPPED FROM ONE CHAMBER DOWN TO THE LOWER LEVEL OF THE NEXT CHAMBER, HE MISSED THE STEP AND SLIPPED. HE PUT HIS LEFT HAND DOWN TO CATCH HIMSELF. WHEN HE PUT HIS HAND DOWN IT WAS PLACED ON A LIFTER AND BENT HIS HAND BACKWARDS.

WHILE LIFTING 3/4 STEEL PLATE 21" X 23", FELT PINCH IN HIS BACK. NOW WHENEVER HE TURNS HIS HEAD TO RIGHT HIS LEFT ARM TINGLES UNDER SHOULDER & DOWN ARM. (PINCHED NERVE/PULLED MUSCLE.) DOCTOR V ISIT 4/11/02.

EE FINISHED FUELING A SMALL DIESEL TANK & WAS DESCENDING A 10' LADDER WITH THE 1 1/2" FEL HOSE IN HIS RIGHT HAND. HE SLIPPED 1/2 WAY DOWN, FALLING 5' TWISTING HIS RIGHT ANKLE. HE DID NOT HAVE 3 POINT CONTACT ON THE LADDER WITH HOSE IN RIGHT HAND. PROCEDURE IS TO ATTACH A LINE TO HOSE AND PULL UP TO TOP OF TANK & LOWER SAME WAY.

EMPLOYEE TRIPPED WHILE JUMPING OVER A PIPE WHICHWAS USED TO PNEUMATICALLY DISCHARGE MATERIAL INTO A TANK. HIS RIGHT FOOT CAUGHT THE PIPE AND HE FELL FACE DOWN INTO THE GROUND HITTING HIS HE AD FIRST. THE IMPACT CREATED A 2" CUT OVER HIS LEFT EYEBROW WHICH REQUIRED 9 STITCHES TO CLOSE UP.

WHILE LAYING REFRACTORY BRICK FOR 7 HRS, NOTICED PAIN IN RIGHT WRIST. @ END OF SHIFT WRIST MADE A POPPING SOUND & STARTED TO HURT MORE. ALSO, SWELLING STARTED TO OCCUR. PREVIOUSLY ONLY TREATED AS FIRST AID. ON 2/25/02, SENT TO DOCTOR, DUE TO CONTINUED PAIN.

EE FELT SHARP PAIN IN HIS RIGHT WRIST WHILE REMOVING AN ACCESS LID ON TOP OF A DUST COLLECTOR.

EE SLIPPED IN THE DISCHARGE THROAT OF THE RAW MILL AND STRAINED HIS BACK, WHILE PASSING LINERS. EE HAS BEEN SEEING A CHIROPRACTOR FOR OVER A YEAR AND THIS COULD BE PRE-EXISTING BUT, NOT SURE A T THIS TIME.

EE REPORTED ON MONDAY, JUNE 24TH THAT HE MUST OF STRAINED HIS BACK ON FIRDAY, DURING A LINER JOB.

EMPLOYEE WAS REMOVING FOUR WAY SPREADER FROM HEADACHE BALL ON CRANE AND MATERIAL FELL INTO HIS EYES. RINSED EYES WITH EYEWASH STATION THE DAY BUT FELT SOMETHING IN HIS EYE THE NEXT DAY SO HE W ENT TO THE EYE CLINIC.

WHILE BREAKING LOOSE A MILL LINER WITH A HAMMER A BULLET HIT EMPLOYEE UNDER RIGHT KNEE WHICH APPEARS TO COME FROM THE LINER.

EE CLAIMS THAT SHE HURT HER RIGHT SHOULDER WHILE PULLING MATERIAL WITH A CONCRETE SCRAPER (PULLER). SHE STRAINED HER SHOULDER.

EMPLOYEE'S WERE DRIVING CHAIN PIN IN PLACE WITH AN 8 LB. SLEDGE HAMMER. THE EE SWINGING THE HAMMER HIT THE DRIVE SPROCKET WRONG RESULTING IN HITTING OTHER EMPLOYEE'S FINGER.

EE TRIED TO SWITCH SILO'S WITH ONE OF THEM BEINGFULL. HE OVER EXTENDED THE CHAIN FALL & HOOK CAME OFF HITTING HIM IN STOMACH

EMPLOYEE FELT DISCOMFORT TO HER LEFT SHOULDER WHILE PULLING MATERIAL INTO PILE WITH HER TRAINER.

EMPLOYEE CLAIMED HE STRAINED HIS BACK ON DEC 1ST WHILE LIFTING 2 50 LB TEST WEIGHTS AFTER TWISTING INSTEAD OF TURNING WHILE PUTTING THEM AWAY. THE INCIDENT WAS NOT REPORTED UNTIL DEC 4 AND HE WENT TO THE DOCTOR ON DEC 5.

2 EE' WERE INSTALLING A STEEL PLATE ON THE EXTERIOR OF A SCAVENGER CHAIN AND ONE SLID DOWN ON EMPLOYEE AND THE OTHER SIDE CAME UP AND PINCHED OTHER EMPLOYEE'S HAND BETWEEN STEEL PLATE AND IDLE R.

EMPLOYEE WAS USING A WHEELBARROW TO MOVE MATERIAL AND FELT STRAIN IN GROIN AREA. HE THOUGHT NOTHING OF IT UNTIL THAT EVENING IT STARTED HURTING AT HOME. THE NEXT DAY HE REPORTED IT TO HIS SUPE RVISOR AND WENT TO THE CLINIC.

WHILE KEYING IN BRICK NEW MATERIAL DROPPED DOWN INTO EE S EYES FROM BRICK AND OR SHELL.

BOBCAT SLIPPED OFF KILN RAMP CAUSING BRICKS TO` FALL ONTO EMPLOYEE AND BOBCAT.

WHILE CHANGING OUT BELT CLIP, EMPLOYEE USED A HAMMER AS A BACKING AND HIT CLIP WITH OTHER HAMMER, CAUSING SOMETHING TO FLY AND STRIKE HIS LEFT EYE.

WENT TO DR ON 8-24 AFTER HIS NORMAL 5 DAYS OFF. EMPLOYEE HIT HAND AGAINST CHUTE HOUSING WHILE TRYING TO UNPLUG HEAD SECTION OF BELT LINE.

EE SMASHED HIS THUMB WHILE TRYING TO BUST UP A LUMP IN THE ROCK HOPPER, WITH HIS HAMMER.

EE WAS CROUCHED DOWN TO HOLD A GROUND ROD FOR A CONVEYOR, WHEN EE WAS POSITIONING THE GROUND ROD DRIVER AND IT SLIPPED FROM HIS HANDS DUE TO THE COLD WEATHER, AND THE DRIVER STRUCK EE IN THE M OUTH.

WHEN SEVERAL EMPLOYEES WERE BEING TAKEN TO THEIR MOBILE EQUIPMENT, THEY WERE RIDING (2) IN THE BACK OF A PICK-UP TRUCK. THE DRIVER USED POOR JUDGEMENT (DRIVER ERROR) AND THREW ONE OF THE EMPLO YEES BACK AGAINST THE TAILGATE OF TRUCK WHILE GOING OVER A SPEED BUMP. THE EE HIT THE BACK OF HIS HEAD AND PULLED HIS ALREADY SORE LEFT SHOULDER.

WHILE CLEANING UP AFTER A WELDING JOB, EMPLOYEE DID NOT NOTICE HIS FOOT WAS TANGLED IN ONE OF THE LOOPS OF THE WELDING LEAD. WHEN HE STEPPED BACK, HE FELL ON HIS RIGHT ARM.

AFTER USING THE DRILL PRESS, EMPLOYEE MOVED PRESS TO ONE SIDE AND STARTED TO USE THE VISE. WHILE ATTEMPTING TO THREAD HOLE IN THE STEEL PLATE, THE WRENCH GAVE WAY FROM UNDUE PRESSURE, SLIPPING ,WHICH HIS MIDDLE RIGHT FINGER HIT DRILL, CUTTING FINGER.

EMPLOYEE DAMAGED HANDS AFFTER ATTEMPTING TO REMOVE A DISLODGED CEMENT BAG. HE WAS TRYING TO REMOVE A BAG OFF OF A MESH CONVEYOR BEFORE DROPPING IT ONTO A RUBBER CONVEYOR. HIS HANDS WERE PULLED IN BETWEEN THE STEEL PLATE AND THE MESH CONVEYORBELT. THE BELTS WERE NOT SHUT DOWN PRIOR TO THISACTIVITY.

WHILE PULLING OUT BROKEN BAG FROM BAG CLEANER, MATERIAL CAME OUT OF BAG AND GOT INTO RIGHT EYE.

WHILE TIGHTENING FITTINGS WITH A WRENCH IN TIGHTQUARTERS, EE STRAINED HIS BACK (LOWER)

EE CLIMBED OVER A DUCT AND TWISTED HIS ANKLE AFTER STEPPING ONTO A PIECE OF MATERIAL.

WHILE SITTING IN SWIVEL CHAIR AT DESK, EMPLOYEE PUSHED AWAY FROM DESK AND WAS ATTEMPTING TO SWIVEL THE CHAIR IN THE OPPOSITE DIRECTION, WHEN HISKNEE FELT LIKE IT POPPED. EMPLOYEE DID NOT GO TO DOCTOR UNTIL 2-27-98.

EMPLOYEE WAS REMOVING ONE OF THE HEADACHE DECK SUPPORTS WITH A COME-A-LONG AND THE PADEYE ON THESUPPORT TORE, CASUING THE COME-A-LONG TO RELEASE HITTING ON THE LOWER RIGHT LEG.

THE EE WAS CUTTING BOLTS FROM 316 DIFFUSER WITH A TORCH, WHICH IS A TIGHT AREA, HE REPOSITIONED HIMSELF & LOST HIS FOOTING & BURNT HIS LEFT ARM WITH THE TORCH.

LOST FOOTING WHILE USING LEVERAGE BOARD ON ELEC. TRANFORMER FALL FLAT ON BACK & BUTTOCKS AREA.

WHILE ATTEMPTING TO REMOVE A PIN BETWEEN SHEAR HUB AND CAM ARM, EMPLOYEE WSA USING A DRIFT PIN AND 3 LB HAMMER TO BEAT IT OUT. AFTER THE THRID HIT, EMPLOYEE HIT HIMSELF ON THE LEFT KNEE.

EE WAS LIFTING A OVERFLOW CHUTE PLATE WHEN HE TWISTED HIS BODY THE WRONG WAY HE HURT HIS BACK.

EMPLOYEE OPENED HATCH ON TOP OF A AIRSLIDE TO GET LUMPS OUT. THE AIRSLIDE WENT POSITIVE AND BLEW MATERIAL INTO EYES. HE FORGOT TO LOCK OUT THE ROTARY VALVE WHICH WOULD HAVE PREVENTED THIS FROM OCCURRING.

EE WAS JACKHAMMERING WITH A 14 LB JACKHAMMER. HE WAS SCALING THE COOLER FLOOR AND THE BIT JUMPED UP AND SLID FORWARD, CATCHING MORE MATERIAL. WHEN IT CAUGHT, EE TWISTED HIS WRIST (RIGHT). THE EE HAD HIS BODY WEIGHT ON JACKHAMMER, WHICH IS NOT STANDARD PRACTICE.

EMP WAS WASHING #2 KILN FEED SHELF WHEN ONE OF THE AIR BLASTERS DISCHARGED CAUSING HOT GASES ANDMATERIAL TO BLOW OUT OF THE 10" WEST PORT ONTO HIS RIGHT FOREARM AND FOREHEAD.

EMPLOYEE AND FELLOW EMPLOYEE WERE INSTALLING A COVER ON SAND HOPER LIP. FELLOW EMPLOYEE WAS ON FORKLIFT INSTALLING 15" CHANNEL, EMPLOYEE WAS GUIDING IT INTO PLACE. EMPLOYEE GRABBED THE CHANNEL WITH HANDS TO MOVE FORWARD TOWARDS SAND HOPPER. IN THE PROCESS OF MOVING THE CHANNEL FELL INTO PLACE WITH EMPLOYEE HAND (FINGER) CAUGHT BETWEEN CHANNEL AND SAND HOPPER.

EMPLOYEE WAS WORKING ON REPLACING JEFFREY HAMMERS. GRINDING ON HAMMER WHEN A PIECE OF MEETAL HIT CHEEK AND INTO EYE LID.

EE WAS WELDING ON #3124 DISCHARGE CHUTE, HOT SLAG FELL ON HIS CROTCH AREA. BURNT THROUGH HIS PANTS ONTO HIS GENITAL AREA. 2ND DEGREE BURNS.

EE WAS CHANGING FILTERS ON 2514 F-K COMPRESSOR, LOST HIS BALANCE ABOUT 15 FEET ABOVE THE FLOOR. CAME DOWN STRIKING 2514 AEROPOL BLOWER MOTOR, AND BELT GUARD WITH RIGHT SIDE OF BODY. HIS LEFT S IDE AND HEAD HIT THE CONCRETE FLOOR.

EE WAS STARTING TO CLIMB DOWN THE LADDER ON THE NORTH SIDE OF THE GYP HOPPER FOR 1 & 2 FINISH MILL. HE LOST HIS FOOTING AND FELL TO THE GROUND, LANDING ON HIS RIGHT HEEL.

EMP WAS GOING BACK INTO OTIS ELEVATOR, FORGOT THAT HE HAD LEFT THE GATE LOWER THAN NORMAL, RAN INTO IT WITH HIS HARD HAT, JAMMING HIS NECK. DID NOT GO TO DR TIL 11-11. STARTED CHIROP 11-22-95.

EE WAS ON SWEEPER, HE WAS GOING AROUND CORNER ON NORTH SIDE OF ADMINISTRATION BUILDING AND MATERIAL FLEW INTO HIS RIGHT EYE.

EMPLOYEE WAS SENT TO #1 CLINKER COOLER TO CLEAN OUT AN UNDERGRATE COMPARTMENT. HAD BEEN WORKING ON #1 PREHEATER & #1 RAW MILL. WORKING ABOUT 1-1/2 HOURS, WHEN HE QUIT PERSPIRING AND WAS OVERCO ME BY THE HEAT. TEMPERATURE IN THE AREA ABOUT 105-110.

EMPLOYEE WAS WALKING BETWEEN KILN #1 & KILN #2, WHEN DUST BLEW UP UNDER HIS GLASSES. HE WAS COMING BACK FROM JOB #3001 KILN 2 BAGHOUSE. PRESCRIPTION - HAD TO REMOVE PARTICLES FROM HIS EYES.

EMPLOYEE & ANOTHER EMPLOYEE WERE WASHING BUILDUP OFF OF THE UPPER PORTION OF THE FEED SHELF. A LARGE CHUNK OF MATERIAL BROKE LOOSE & FELL, AS THE CHUNK LANDED, HOT GASES BLEW OUT THE MAN DOOR & IN INJURED. HE TRIED TO MOVE OUT OF THE WAY, FELL INTO OTHER EMPLOYEE WHO HAD BEEN KNOCKED AROUND BY WATER GUN. THE CHUNK FELL STRIKING THE GUN LANCE. 2ND DEGREE BURNS HOSPITAL STAY.

EMPLOYEE WAS GETTING ONTO COMPANY FORK TRUCK AND BUMPED TOP OF HEAD ON ROLL BAR. EMPLOYEE WAS WEARING SAFETY HELMET & FOLLOWED NORMAL METHOD OF EMBARKING VEHICLE. THIS PARTICULAR FORK TRUCK HA S A LOWER ROOL BAR THAN THE OTHER ONES. *EMPLOYEE WENT TO CHIROPRACTOR FOR MEDICAL ATTENTION*

A FEEDER BELT WAS THROWN OUT OF CHUTE AND HIT EMPLOYEE ON HIS RIGHT FOOT BEHIND THE STEEL TOE.

EE WAS PUTTING LAST SHOVEL OF MATERIAL IN BOBCAT BUCKET. BOBCAT WAS 1 1/2 IN AIR, WHEN OPERATOR PUT BUCKET DOWN AND STARTED BACKING UP. BUCKET LANDED ON EE'S RT FOOT. EE'S FOOT WAS UNDER THE B UCKET, MOVED HIS LEFT IN TIME BUT NOT HIS RT.

EE WAS ON THE LADDER AT THE INLET TO #2 FINISH MILL. HE LOST HIS FOOTING DUE TO MATERIAL BUILDUP ON THE PLATFORM. INSTEAD OF FALLING, HE JUMPED OFF (8-10').WHEN HE LANDED ON THE CONCRETE FLOOR , HE FELT PAIN IN BOTH FEET.

LACK OF SLEEP, ATE A BIG LUNCH & HAD CRAMPS. WENT TO THE EMERGENCY ROOM LATER IN THE EVENING WITH CHEST PAINS, FOUND OUT THAT HE HAD STRAINED THE MUSCLE SIN THE CHEST.

EMPLOYEE WAS ON HIS WAY TO #3 FINISH MILL BUILDING, WALKING ON A ROAD/PATH SOUTH OF BUILDING COVERED WITH CLINKER BALLS, AS THIS IN VICINITY OF WHERE MATERIAL IS STORED. EMPLOYEE SLIPPED AND LANDED ON BUTTOCKS AND SMALL OF BACK.

EMPLOYEE WAS WORKING ON DIAPHRAM INSIDE #2 RAW MILL. HE WAS CRAWLING THROUGH THE CONE BACKWARDS WHEN HE SLID ON THE INCLINE, WHEN THE BACK OF HIS RIGHT KNEE HIT THE EDGE OF THE CONE.

EE WAS WEEDING EATING GRASS AROUND CAOL YARD DITCH. WHEN FOREIGN OBJECT STRUCK HIM IN THE LEFT UPPER ARM.

EMPLOYEE WAS LIFTING A 5 GAL PAIL OF ACETIC ACID TO BE USED TO CLEAN 966 LOADER BUCKET WAS ABOUT KNEE LEVEL WHEN HE BEGAN LIFT AS HE WAS LIFTING THE BUCKET HE FELT PAIN IN LOWER LEFT SIDE OF BACK EMPLOYEE WAS GIVEN A MEDICAL PRESCRIPTION

EE WAS WORKING IN THE DISCHARGE OF THE NO.3 FINISH MILL WHEN SOME MATERIAL WAS STIRRED UP AND BLEW INTO HIS RIGHT EYE.

EMPLOYEE WAS HEADED TO CLINKER SILOS AS INSTRUCTED, HE SAW A FIRE IN FEED CONVEYOR AREA; CHANGED DIRECTION TO ER #4 TO GET FIRE EXTINGUISHER ABOUT HALF WAY BETWEEN SILOS AND ER #4, HE STEPPED ON CLINKER BALL AND TWISTED LEFT ANKLE.

EMPLOYEE WAS TRYING TO MOVE OUT OF WAY OF BOBCATTRIPPED OVER SLEDGE HAMMER, TRIED TO BREAK HIS FALL BY GRABBING I-BEAM, STRUCK HIS RIGHT HAND ON A METAL TAB THAT WAS WELDED ON THE I BEAM.

EE WAS CLEANING LOCKER RESTROOM AREA WHILE WASHING THE TOILET AREA WITH BLEACH AND SOAP HE EXPERIENCED SHORTNESS OF BREATH. TAKEN TO HOSPTIAL WAS UNDER OXYGEN FOR 2 HOURS.

EMPLOYEE WAS GRINDING ON FAN HOUSING FOR #0602 PREHEATER FAN WHEN FOREIGN OBJECT BLEW INTO HIS LEFT EYE REMOVAL OF FOREIGN BODIES EMBEDDED IN EYE

EMPLOYEE STOOD UP TOO EARLY WHILE WALKING IN LOW OVERHEAD ATWALK AREA #1 SUGAR SCOOP WENT TO DOC 05-19-93 PHYSICAL THERAPY

EMPLOYEE WAS INVESTIGATING SILO, WHEN CEMENT DUST FLEW INTO RIGHT EYE. * EMPLOYEE WAS GIVEN A PRESCRIPTION AND PAIN MEDICATION*

EMPLOYEE WAS CUTTING GRASS NEAR SHRUBBERY WHEN A BRANCH SNAPPED BACK AND A THORN STUCK IN HER RIGHT KNEE.

EMPLOYEE STEPPED ON POWER CABLE AND TWISTED HIS LEFT ANKLE.

EMPLOYEE WAS LIFTING CRUSHER HAMMERS INTO THE DOOR OF THE JEFFREY.

EMPLOYEE WAS DESCENDING LADDER OF PHB MACHINE, HAD OIL ON HIS SHOES & SLIPPED ON LADDER RUNE.

EMPLOYEE DROPPED BUCKET ON RIGHT SHIN & PUNCTURED LEG WITH EDGE OF BUCKET.

EMPLOYEE WALKED INTO PILE OF HOT DUST AT TAIL SECTION OF 1101 TRYING TO GET TO THE PLUGGED CHUTE.

EMPLOYEE WAS GREASING BEARINGS WHEN WIND BLEW DUST AND MATERIAL AROUND AND SOME WENT IN AND UNDER HIS GLASSES.

EMPLOYEE WAS CUTTING A BELT WHEN THE KNIFE SLIPPED AND CUT HIM IN THE STOMACH.

EMPLOYEE WAS CLEANING AND PICKING UP MATERIALS FROM THE PREVIOUS COLLER, TRIED TO PUT A PIECE OF SCRAP METAL WHICH WAS HEAVY AND AKWARD TO HANDLE IN BUCKET, TWISTED BACK.

EMPLOYEE WAS GREASING 201 BELT IDLERS, IT WAS STARTED, DUMPING MUD AND PINNING HIM AGAINST WALL.

EMPLOYEE AWS PICKING UP TIPPING VALVE GATES FROM ELEVATOR ON 7TH LEVEL WHEN HE SLIPPED & TWISTED THE WRONG WAY

EMPLOYEE WAS LIFTING A BARREL TO REMOVE REMAINING OIL, PULLED MUSCLE IN LOWER BACK.

EMPLOYEE WAS RUNNING EQUIPMENT BETWEEN THE KILNS WHEN MATERIAL FLEW INTO LEFT EYE.

EMPLOYEE WAS REPLACING BAGS IN THE #2 KILN PULLING UP. 30 FT BAGS TO BE ATTACHED WITH CHAIN.STRAINED LEFT SHOULDER AND LEFT SIDE OF BACK.

EE WAS FEEDING CANS INTO THE 1 KILN.

SHOVELING MATERIAL USING COME A LONG PULLED MUSCLE IN BACK

EMPLOYEE WAS SODERING DRIER ON PLANT AIR 5&6 THE SILVER SOLDER ROD WENT OVER & UNDER THE SAFETY GLASSES HIT THE INNER SECTION OF THE RIGHT EYE

WHILE EE WAS PASSING BRICK ON 2 KILN BRICK JOB HIS LITTLE FINGER ON RIGHT HAND GOT SMASHED IN THE LINE OF PASSING BRICK.

NO UNUSUAL MOVEMENT-NO WITNESS-EMPLOYEE ALLEGEDLY PICKED UP TONGUE OF PORTABLE WELDER AND FELT A SHARP PAIN IN LOWER RIGHT OF THE ABDOMEN.INJURED HAD 18 WORKMANS COMP CLAIMS SINCE 1967.SEVERAL OF THEM ALLEDGEDLY TO BE BACK RELATED.

EMPLOYEE WAS UNDER RAIL WHEN END OF HOSE BLEW OFF CHIPPING HAMMER AND BLEW DUST IN EYE. LATER WAS NOTIFIED THAT THE EMPLOYEE WENT TO EMERGENCY ROOM TO HAVE FOREIGN OBJECT TAKEN OUT. HE HAD B EEN TO THE DOCTOR EARLIER IN THE DAY.

EMPLOYEE WAS WORKING ON SPLICING THE #254 BELT,THE HOOD WAS RAISED FELL DOWN AND HIT HIM IN THE BACK AND LOWER LEG.

WORKING AROUND ELEVATOR PART BLEW IN EYE

EE WAS CLIMBING DOWN THE INLET PLATFORM LADDER AND STEPPED OFF FROM THE 2ND RUNG. PUTTING ALL HIE WEIGHT ON HIS RIGHT FOOT AND LANDED ON A CLINKER BALL.

I WAS JACKHAMMERING TO SCALE MATERIAL FOR THE FLOOR, WHEN HANDS BECAME NUMB.

HELPING OTHER EMP ON CLINKER SILO PUTTING SECTIONS OF PIPE SCAFFOLDING FELT PAIN BACK

EMPLOYEE WAS PICKING UP LINER PLATE FOR INLET OF TRUNION FOR FINISH MILL #3, WHEN HIS BACK POPPED OUT.

TIGHTENING CHAI N ON FEEDER WITH COME A LONG, IT BROKE SNAPPED BACK HIT R HAND

EE WAS CLEANING AROUND 1140 RECLAIM HOPPER, WHEN A METAL PLATE FELL TO PIT BELOW. HE AND ANOTHER EE PULLED PLATE, IT SLIPPED AND PINNED HIS FOOT AGAINST IT AND DUST PIPE.

CHANGING LINERS IN MILL, LIFTED IT UP PULLED BACK

PUTTING WASTE MATERIAL IN DUMPSTER FELL ON R SIDE HITTING HEAD, SHOULDER AND LEG

EMPL WAS WORKING ON #214 BELTHEAD PULLEY USING METAL BAR TO PULL BELT UP WHEN IT SLIPPED & HIT ABOVE MY RIGHT EYE.

EMPL WAS MOVING #400 GREASE DRUMS IN FRONT OF OIL HOUSE WHEN HE FELT BURNING SENSATION IN RIGHT ELBOW.

EMPLOYEE WAS CLEANING BUILD UP AT INLET DUCT, RAW MILL #1, WHEN HE SLIPPED AND STEPPED INTO HOT DUST ANKLE DEEP WITH BOTH FEET.

EMPLOYEE WAS PULLING ON PIPE WRENCH AT PLANT WATER PUMPS AND STRAINED HIS BACK.

EMPL WAS SHOVELING MATERIAL AT #2 KILN INLET SEAL WIND WAS BLOWING MATERIAL BLEW UP UNDER SAFETY GLASSES INTO RIGHT EYE.

EMPLOYEE WAS SOLDERING WITH SILVERFLUX WHEN HE RUBBED HIS RIGHT FORGETTING HE HAD THAT ON HIS RIGHT HAND. WORKING ON AIR CONDITIONER.

EMPL WAS WALKING AROUND SCOOP AT #1 PREHEATER WHEN DUST BLEW INTO RIGHT EYE.

SILO 8 AIRSLIDE WASNT FLOWING-EMPLOYEE OPENED THE HATCH & MATERIALS BLEW OUT INTO HIS EYES

TRYING TO ROLL GUN BETWEEN BURNER FLOORS FELT SHARP PAIN IN BELT LINE MIDDLE OF BACK

EMPLOYEE WAS LIFTING 800 GREASE DRUM AT PREHEATER PUMP STATION WHEN HE LIFTED A DRUM & PULLED HIS BACK

EMPLOYEE WAS UNLOADING BAGS OF ROCK FILL, AFTER PICKING UP THE BAF, HE TURNED TO PLACE THE BAG ON A PALLET BESIDE THE MIXER, AS HE TURNED HIS FOOT ROLLED ON A ROCK, LOST HIS BALNCE. HE FELL T O THE GROUND, WHEN HE GOT UP HE FELT PAIN IN HISLOWER ACK AND LEFT LEG.

EMPL PUMPING ENERPAC WHEN HANDLE SLIPPED OUT AND HE SMASHED RIGHT THUMB.

IN COLER WORKING IT WAS DUSTY PC OFMATERIAL FLEW IN EYES

EMPLOYEE WAS USING HIGH REACH, REACHING LEVEL HE NEEDED, ELEVATOR JUMPED CAUSING PIECE OF METAL TO CUT RIGHT HAND.

EMPLOYEE WAS REPLACING THE HEAT EXCHANGER ON THE #7 PLANT AIR COMPRESSOR AND WHILE MANEUVERING THE COMPRESSOR, STRAINED HIS LEFT ARM.

HE WAS WASHING PREHEATER WITH HYDRO LAZER GUN. HE IS NOT SURE WHEN HE FELT THE PAIN IN HIS RIGHT SIDE. HE FISHED THE JOB, HE WAS IN PAIN AT HIS WAIST.

EMPLOYEE WAS SOLDERING FITTING WITH EPOXZE BURNING,INHALED TOXIC FUMES.HE WOKE THE NEXT MORNING SPITTING UP BLOOD,NAUSEA AND HEADACHE.

EMPLOYEE WAS CHANGING DIAPHRAM LINERS IN THE #3 FINISH MILL, WHEN SOMETHING FLEW INTO HIS LEFT EYE.

EMPLOYEE WAS USING A 8 LB. HAMMER AT THE HEAD SECTION OF #3104 AND HURT RIGHT ARM.

EMPLOYEE WAS BRINGING THE FORKLIFT BACK TO THE PARKING AREA WHEN SOME MATERIAL BLEW INTO HIS RIGHT EYE

CLIMBING DOWN LADDER FORM CAB STEPPED ON 2D FROM LAST RUNG AND TWISTED R. ANKLE.

WHILE INSTALLING A CONDUIT,METAL WAS STIRRED UP BY WORKERS ABOVE AND FLEW INTO LEFT EYE UNDER SAFETY GLASSES.

EMPLOYEE WAS LAYING BRICKS IN THE NO.2 KILN, WHILE PICKING UP BRICKS HE STRAINED HIS RIGHT WRIST AND PINCHED A NERVE.

THE EMPLOYEE WAS PRYING PLATE ON CLINKER RECLAIMER HOPPER, WHEN THE BAR SLIPPED AND CAUGHT MY TWO FINGERS ON HIS LEFT HAND.

EMPL WAS REMOVING COVER FORM 1101 TO PUT LINK PIN ANDKEEPER PIN BACK IN PLACE COVER SLIPPED OUT OF POSITION BLOWING FINE DUST INTO HIS R EYE BETWEEN SAFETY GLASSES AND EYE

I WAS LEAVING THE FINISH MILL BLDG AFTER COLLECTING SAMPLES HAD NOT REMOVED MY EAR PLUGS & COULD NOT HEAR THE FORKLIFT DRIVERS WARNING I STEPPED INTO THE PATH OF A ONCOMING FORKLIFT THE FORKS SLIPPED OVER THE TOP OF MY RT FOOT CATCHING MY FOOT BETWEEN THE FORKS & THE GROUND

EMPLOYEE WAS LIFTING THE FRONT OF A HIGH LIFT TO MOVE IT, WHEN HE FELT A POPPING SOUND IN HIS CHEST.

HE WAS LAYING BRICK IN THE #1 KILN WHEN HE DEVELOPED A PAIN IN THE GROIN AREA

EMPLOYEE WAS CLEANING POKING BUILDUP WITH A PIPE WHEN HIS FINGBER GOT C AUGHT BETWEEN THE BUILD-UP & PIPE ON THE #2 BURNER FLOOR

EMPLOYEE WAS OPERATING THE MOBILE DRILL RIG WHEN SOMETHING HAPPEN AND HE WAS STRUCK WITH THE DRILL RIG STEM ON THE RIGHT SIDE OF HIS HEAD.

THE EMPLOYEE WAS CLEANING MATERIAL IN THE DEEP BUCKET HOLE, WHEN HE WOALKED THROUGH A PILE OF RAW FEED NOT REALIZING IT WAS HOT AND WENT UP TO HIS KNEE IN IT.

THE EMPLOYEE WAS WALKING DOWN THE STAIRWAY FROM M213 DURING A WIND STORM WHEN A HARD SUBSTANCE ENTERED INTO HIS LEFT EYE.

HE WAS CLEANING OUT TUBE SHEET OF #1 COOLER AT THE BAGHOUSE WHEN SOMETHING WENT INTO HIS EYE

HE WAS WORKING ON REVERSE AIR DAMPER AND HIT HIS HEAD ON THE AIR PIPING AND CONDUIT AT THE BAGHOUS JARRED NECK

HE WAS AT THE #1 KILN JACKHAMMERING BRICK WHEN A PIECE OF CLINKER FELL AND HIT THE BACK OF HIS NECK

INJURED WAS OPERATING PAN & HIT HOLE CAUSING A QUICK JOLT WHICH CAUSED STRAIN TO LOWER BACK.

HE WAS PUSHING 5 WHEELBARROW UNDER INLET OF #1 FINISH MILL WHEN A PIECE OF STEEL WAS DROPPED FROM ABOVE PLATFORM, LANDED ON RIGHT FOOT. LACERATION ON RIGHT FOOT, ONE STITCH REQUIRED.

UNLOADING MASON9Y BAGS FROM THE LINE, WHEN HE TURNED AROUND TO GET THE NEXT ONE IT HAD SLIPPED OFF OF THE INCLINE GOING ONTO THE FLAT SURFACE AND HIT HIS RIGHT SHOULDER.

WORKING ON DIV9RATOR GATE WHEN THE WELD ON THE ARM THAT HE WAS PULLING ON BROKE AND THE COME A LONG CHAIN BECAME LOOSE AND HIT THE RIGHT SIDE OF HIS NOSE

WAS REMOVING WE8GE FROM MACHINE WITH A HAMMER AND PUNCH.PART OF PUNCH CHIPPED OFF AND STRUCK LEFT LEG.

DURING MAINTENANCE OF SHOVEL EE MADE A SHARP TURN AT ENTRANCE & HIT METAL OBJECT WITH LEFT SIDE OF HEAD CUAISNG INJURY.

THE EE WAS CARRYING ONE END OF THE MAIN SUPPORT FOR A BRICK RING. HE HAD A PREVIOUS HERNIA THAT WAS REINJURED DUE TO THE AMOUNT OF WEIGHT HE WAS HANDLING. THE INJURY WAS TO H IS LOWER RIGHT STOMACH AREA.

PUT A ROLL OF PLASTIC ON THE RACK AT BAGHOUSE (SHIPPING) AND A RAT WAS IN THIS ROLL. WHEN I PUSHED IT ON THE RACK, THE RAT WAS FORCED OUT AND BIT ME ON THE LEFT SMALL FINGER. EMPLOYEE WAS TAKE N TO WALK-IN CLINIC, WAS GIVEN TETNUS TOXOID AND THE RAT WAS SENT TO TAMPA LAB FOR TESTING OF RABIES.