Employee was trying to get into the bucket truck when employee's right leg slipped and folded employee's left knee into a squatted position. Employee did not go to the doctor until the following day.
Grayson Quarry: 49 citaciones de la MSHA Metal/Non-Metal
Grayson Quarry tiene $8K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Grayson Quarry.
- Muertes
- 0
- Incidentes totales
- 32
- Años en registro
- 1983–2024
- Último incidente
- Nov 2024
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Grayson Quarry tiene $8K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2026-03-24
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Quartz, respirable, >1% Qtz10
- Respirable dust, <.1mg4
- Unlisted Particulate, respirable, <1% Qtz3
Ver los análisis individuales (17)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2026-03-24 | Quartz, respirable, >1% Qtz | 0.28 | 0.39 | 0.72 | Utility Man |
| 2026-03-24 | Quartz, respirable, >1% Qtz | 0.34 | Front-end Loader Operator | ||
| 2026-03-24 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2026-03-24 | Quartz, respirable, >1% Qtz | 0.23 | Utility Man | ||
| 2018-07-26 | Unlisted Particulate, respirable, <1% Qtz | 0.18 | Truck Driver | ||
| 2018-07-26 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2018-07-26 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2018-07-26 | Quartz, respirable, >1% Qtz | 0.44 | 1.28 | 0.34 | Crusher Oper/Worker |
| 2008-08-06 | Quartz, respirable, >1% Qtz | 0.49 | 0.71 | 0.69 | Utility Man |
| 2008-08-06 | Quartz, respirable, >1% Qtz | 0.38 | 1.71 | 0.22 | Crusher Oper/Worker |
| 2008-08-06 | Quartz, respirable, >1% Qtz | 0.65 | 2.07 | 0.31 | Crusher Oper/Worker |
| 2004-12-08 | Respirable dust, <.1mg | 0 | Dry Screen Plant Operator | ||
| 2004-12-08 | Quartz, respirable, >1% Qtz | 0.34 | 1.58 | 0.22 | Crusher Oper/Worker |
| 2004-06-16 | Unlisted Particulate, respirable, <1% Qtz | 0.15 | Front-end Loader Operator | ||
| 2004-06-16 | Quartz, respirable, >1% Qtz | 0.28 | 0.77 | 0.36 | Crusher Oper/Worker |
| 2002-01-29 | Unlisted Particulate, respirable, <1% Qtz | 0.32 | Front-end Loader Operator | ||
| 2002-01-29 | Quartz, respirable, >1% Qtz | 0.56 | 2.16 | 0.26 | Crusher Oper/Worker |
Grayson Quarry registró 0.00 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 * | 0.00 | 0.00 | 0.000 |
| 2024 * | 0.00 | 0.00 | 0.000 |
| 2023 * | 0.00 | 0.00 | 0.000 |
| 2022 * | 0.00 | 0.00 | 0.000 |
| 2021 * | 0.00 | 0.00 | 0.000 |
| 2019 * | 0.00 | 0.00 | 0.000 |
| 2017 * | 0.00 | 0.00 | 0.000 |
| 2012 * | 0.00 | 0.00 | 0.000 |
- Vulcan Construction Materials, LLC 1950 al presente
| Año | Empleados |
|---|---|
| 2026 | 16 |
| 2025 | 16 |
| 2024 | 13 |
| 2023 | 15 |
| 2022 | 14 |
| 2021 | 12 |
| 2020 | 7 |
| 2019 | 8 |
| 2018 | 8 |
| 2017 | 10 |
| 2016 | 6 |
| 2015 | 4 |
| 2014 | 3 |
| 2013 | 6 |
| 2012 | 10 |
| 2011 | 11 |
| 2010 | 21 |
| 2009 | 19 |
| 2008 | 20 |
| 2007 | 27 |
| 2006 | 28 |
| 2005 | 26 |
| 2004 | 24 |
| 2003 | 25 |
| 2002 | 25 |
| 2001 | 25 |
| 2000 | 28 |
Grayson Quarry se ubica en Gwinnett County, Georgia, donde la categoría minera del Censo representa el 0.1% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 7,250 | 0 | 0 | 0.0 |
| 2026 Q1 | 8,067 | 0 | 0 | 0.0 |
| 2025 Q4 | 7,494 | 1 | 0 | 133.4 |
| 2025 Q3 | 6,620 | 0 | 0 | 0.0 |
| 2025 Q2 | 8,878 | 0 | 0 | 0.0 |
| 2025 Q1 | 8,716 | 0 | 0 | 0.0 |
| 2024 Q4 | 7,539 | 0 | 0 | 0.0 |
| 2024 Q3 | 8,370 | 7 | 0 | 836.3 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 7,349 | 0 | 0 | 0.0 |
| 2024 Q1 | 6,918 | 0 | 0 | 0.0 |
| 2023 Q4 | 8,383 | 0 | 0 | 0.0 |
| 2023 Q3 | 8,728 | 0 | 0 | 0.0 |
| 2023 Q2 | 8,535 | 0 | 0 | 0.0 |
| 2023 Q1 | 8,482 | 0 | 0 | 0.0 |
| 2022 Q4 | 7,605 | 0 | 0 | 0.0 |
| 2022 Q3 | 7,994 | 0 | 0 | 0.0 |
| 2022 Q2 | 6,920 | 4 | 2 | 578.0 |
| 2022 Q1 | 7,021 | 0 | 0 | 0.0 |
| 2021 Q4 | 6,526 | 0 | 0 | 0.0 |
| 2021 Q3 | 6,602 | 0 | 0 | 0.0 |
| 2021 Q2 | 5,611 | 1 | 0 | 178.2 |
| 2021 Q1 | 4,413 | 0 | 0 | 0.0 |
| 2020 Q4 | 2,300 | 1 | 0 | 434.8 |
| 2020 Q3 | 3,526 | 3 | 1 | 850.8 |
| 2020 Q2 | 2,791 | 0 | 0 | 0.0 |
| 2020 Q1 | 5,782 | 0 | 0 | 0.0 |
| 2019 Q4 | 5,822 | 0 | 0 | 0.0 |
| 2019 Q3 | 5,529 | 0 | 0 | 0.0 |
| 2019 Q2 | 5,890 | 0 | 0 | 0.0 |
| 2019 Q1 | 5,294 | 0 | 0 | 0.0 |
| 2018 Q4 | 5,111 | 0 | 0 | 0.0 |
| 2018 Q3 | 4,684 | 0 | 0 | 0.0 |
| 2018 Q2 | 4,215 | 0 | 0 | 0.0 |
| 2018 Q1 | 4,960 | 0 | 0 | 0.0 |
| 2017 Q4 | 5,414 | 3 | 0 | 554.1 |
| 2017 Q3 | 5,072 | 0 | 0 | 0.0 |
| 2017 Q2 | 5,040 | 3 | 2 | 595.2 |
| 2017 Q1 | 5,142 | 0 | 0 | 0.0 |
| 2016 Q4 | 3,997 | 0 | 0 | 0.0 |
| 2016 Q3 | 4,050 | 0 | 0 | 0.0 |
| 2016 Q2 | 2,954 | 0 | 0 | 0.0 |
| 2016 Q1 | 4,438 | 0 | 0 | 0.0 |
| 2015 Q4 | 2,572 | 0 | 0 | 0.0 |
| 2015 Q3 | 2,110 | 0 | 0 | 0.0 |
| 2015 Q2 | 4,719 | 0 | 0 | 0.0 |
| 2015 Q1 | 2,435 | 0 | 0 | 0.0 |
| 2014 Q4 | 1,204 | 0 | 0 | 0.0 |
| 2014 Q3 | 1,306 | 0 | 0 | 0.0 |
| 2014 Q2 | 1,274 | 0 | 0 | 0.0 |
| 2014 Q1 | 1,217 | 0 | 0 | 0.0 |
| 2013 Q4 | 6,837 | 0 | 0 | 0.0 |
| 2013 Q3 | 2,744 | 0 | 0 | 0.0 |
| 2013 Q2 | 4,618 | 0 | 0 | 0.0 |
| 2013 Q1 | 3,530 | 0 | 0 | 0.0 |
| 2012 Q4 | 3,490 | 0 | 0 | 0.0 |
| 2012 Q3 | 6,705 | 0 | 0 | 0.0 |
| 2012 Q2 | 6,338 | 0 | 0 | 0.0 |
| 2012 Q1 | 4,941 | 0 | 0 | 0.0 |
| 2011 Q4 | 5,101 | 0 | 0 | 0.0 |
| 2011 Q3 | 5,768 | 0 | 0 | 0.0 |
| 2011 Q2 | 7,249 | 0 | 0 | 0.0 |
| 2011 Q1 | 5,500 | 0 | 0 | 0.0 |
| 2010 Q4 | 6,184 | 0 | 0 | 0.0 |
| 2010 Q3 | 8,718 | 1 | 0 | 114.7 |
| 2010 Q2 | 9,735 | 0 | 0 | 0.0 |
| 2010 Q1 | 8,725 | 1 | 1 | 114.6 |
| 2009 Q4 | 5,140 | 0 | 0 | 0.0 |
| 2009 Q3 | 8,737 | 1 | 0 | 114.5 |
| 2009 Q2 | 10,175 | 0 | 0 | 0.0 |
| 2009 Q1 | 5,543 | 5 | 0 | 902.0 |
| 2008 Q4 | 9,358 | 0 | 0 | 0.0 |
| 2008 Q3 | 10,990 | 1 | 1 | 91.0 |
| 2008 Q2 | 10,772 | 0 | 0 | 0.0 |
| 2008 Q1 | 11,606 | 2 | 0 | 172.3 |
| 2007 Q4 | 12,243 | 0 | 0 | 0.0 |
| 2007 Q3 | 15,333 | 0 | 0 | 0.0 |
| 2007 Q2 | 16,080 | 0 | 0 | 0.0 |
| 2007 Q1 | 16,956 | 3 | 0 | 176.9 |
| 2006 Q4 | 16,810 | 0 | 0 | 0.0 |
| 2006 Q3 | 19,129 | 0 | 0 | 0.0 |
| 2006 Q2 | 18,522 | 0 | 0 | 0.0 |
| 2006 Q1 | 16,735 | 0 | 0 | 0.0 |
| 2005 Q4 | 17,164 | 2 | 0 | 116.5 |
| 2005 Q3 | 18,094 | 0 | 0 | 0.0 |
| 2005 Q2 | 17,775 | 2 | 0 | 112.5 |
| 2005 Q1 | 16,136 | 1 | 0 | 62.0 |
| 2004 Q4 | 16,358 | 1 | 0 | 61.1 |
| 2004 Q3 | 16,937 | 0 | 0 | 0.0 |
| 2004 Q2 | 18,225 | 1 | 0 | 54.9 |
| 2004 Q1 | 15,097 | 0 | 0 | 0.0 |
| 2003 Q4 | 16,497 | 0 | 0 | 0.0 |
| 2003 Q3 | 16,750 | 0 | 0 | 0.0 |
| 2003 Q2 | 16,002 | 0 | 0 | 0.0 |
| 2003 Q1 | 14,735 | 2 | 0 | 135.7 |
| 2002 Q4 | 13,406 | 0 | 0 | 0.0 |
| 2002 Q3 | 14,642 | 0 | 0 | 0.0 |
| 2002 Q2 | 17,661 | 0 | 0 | 0.0 |
| 2002 Q1 | 15,534 | 0 | 0 | 0.0 |
| 2001 Q4 | 15,299 | 0 | 0 | 0.0 |
| 2001 Q3 | 16,947 | 0 | 0 | 0.0 |
| 2001 Q2 | 16,046 | 0 | 0 | 0.0 |
| 2001 Q1 | 14,874 | 0 | 0 | 0.0 |
| 2000 Q4 | 14,370 | 1 | 0 | 69.6 |
| 2000 Q3 | 17,220 | 0 | 0 | 0.0 |
| 2000 Q2 | 17,382 | 0 | 0 | 0.0 |
| 2000 Q1 | 17,994 | 0 | 0 | 0.0 |
Incidentes reportables
32 en archivo2024 · 1 incidente
2010 · 1 incidente
Repositioned a piece of steel to be cut. Steel then slid and landed on top of hand.
2007 · 1 incidente
Employee was changing drill bit on DM30 drill. The driller dropped the drill bit onto his finger.
2006 · 2 incidentes
Employee was cutting a drill bit out of the gyratory crusher and slag fell in his ear.
The employee was sharpening bits at the shop with a grinder and felt something in his eye.
2005 · 2 incidentes
Went to catch the chute on the bulk truck & struck left index finger. On 6/3/05 lost feeling with the middle/index finger. Reported claim to the employer on 6/3/05.
Employee was raising gyratory crusher door with electric wench. The cable broke; ee jumped to make sure he was clear of the cable and fell onto his back.
2004 · 1 incidente
The metal access door for the gyratory crusher came loose and fell into the primary feeder. The door was cut into two pieces. One piece was successfully removed without incident. The second section of the door shifted as it was being lifted and smashed the employee's thumb.
2002 · 2 incidentes
EE WAS GOING INTO SCREEN DECK, RASIED UP STRIKING BROW ON CHANNEL IRON.
EMPLOYEE WAS PULLING ON GUM "RAW" RUBBER, HAND SLIPPED OFF RUBBER AND FELL BACKWARDS ON THE GROUND.
2000 · 2 incidentes
EMPLOYEE LOWERING PIECE OF METAL BY HAND AND IT FELL. FRACTURE TO HIS LEFT HAND.
EMPLOYEE WAS ON LADDER WITHOUT ANYONE HOLDING IT--FRACTURED LEFT WRIST.
1999 · 1 incidente
EE WAS DRIVING HAUL TRUCK FROM PIT TO CRUSHER, HIT HOLE IN ROAD AND JAMMED WRIST AGAINST KNOB ON STEERING WHEEL.
1998 · 2 incidentes
EE WAS REMOVING ROCK DEFLECTOR. ROCK DEFLECTOR SLIPPED OUT OF HAND RESULTING IN CUT TO LEFT FOOT JUST PAST STEEL TOE ON BOOT
POSITIONED COME-A-LONG TO RAISE SCREW. PULLED ON CHAIN, COME-A-LONG CAME LOOSE AND FELL APPROX. 4 FT STRIKING RIGHT ARM IN WRIST AREA.
1997 · 2 incidentes
EE WAS TIGHTENING BOLTS WITH AIR WRENCH, IT KICKED BACK STRIKING EE IN CHIN.
INSTALLING DISCHARGE PIPE AT SAND SCREW. PIPE WAS BEING LIFTED BY CRANE, PIPE SHIFTED CATCHING HAND BETWEEN PIPE AND METAL BRACES.
1996 · 1 incidente
ROB CONTUSIONS RESULTING FROM A FALL OF ABOUT 4' FROM GRANITY TAK EUP PULLEY. CONVEYOR WAS LOCKED OUT AT TIME. CUTTING AWAY A GUARD TO REPLACE TO GRIZZLY FALSE UP PULLEY.
1995 · 1 incidente
EE GOT OUT OF HAUL TRUCK TO CHECK HYD OIL WHEN DOOR CAME OPEN KNOCKING HIM TO GROUND. HE FRACTURED HIS LEFT ELBOW.
1994 · 3 incidentes
AN EMPLOYEE WAS MEASURING FITTING SFOR A CRUSHER OILER WHEN HE WAS STRUCK ON THE RIGHT CHEEK BY A FALLING ROCK RESULTING IN A LACERATION.
THE EMPLOYEE HAD A HEART ATTACK AT THE END OF HIS SHIFT.
EE (CLASS A TRUCK DRIVER) WAS REMOVING A WIRE MESH GUARD FROM BEHIND THE HYDRASET CYCINDERS OF A 5 1/2' STANDARD CONE CRUSHER. HE WAS PULLING ON THE GUARD @ ARMS DISTANCE FROM THE CRUSHER. T HE GUARD WAS BOWED OUT BETWEEN 2 OF THE CYLINDERS CAUSING CONSIDERABLE TENSION. AS IT WAS PULLED FREE THE GUARD UNCOILED & SPRANG INTO EE'S FACE CAUSING LACERATION TO LIP REQUIRING STITCHES.
1993 · 1 incidente
EE WAS CARRYING METAL TO 4 SCREEN TO PATCH A CHUTE HE DROPPED THE METAL ON HIS FOOT MASHING HIS LITTLE TOE LEFT FOOT.
1988 · 3 incidentes
EMPLOYEE WAS ATTEMPTING TO CUT CONVEYOR BELTING WITH A UNTILITY KNIFE. KNIFE SLIPPED AND CUT PALM OF LEFT HAND. FIVE STITCHES REQUIRED.
INJURED WAS WALKING FROM SHOVEL TO QUARRY TRUCK, STEPPED IN A HOLE AND TWISTED ANKLE.
I,NAME WAS TRYI3G TO BREAK ICE FROM THE HEAD PULLY OF RADIAL STACKER WITH A HAMMER AND BAR. HE MISSED THE BAR AND HIT HIS INDEX FINGER, RIGHT HAND WITH THE HAMMER.
1987 · 5 incidentes
TURNING BOLT ON3SHOVEL, GOT SOMETHING IN LEFT EYE.
THE INJURED AND3ANOTHER EMPLOYEE WERE CUTTING UP SOME FALLEN TREES IN THE PLANT OFFICE YARD.HE WAS STANDING ON THE TREE BEING CUT.WHEN THE SAW WENT THROUGH THE TREE,HE LOST HIS BALANCE,THREW U P HIS ARMS TO R9GAIN BALANCE AND HIT RIGHT HAND AGAINST CHAIN SAW BLADE.STITCHES REQUIRED.
THE INJURED WAS3WORKING WITH AIR HAMMER INSIDE GYRATORY CRUSHER.HE WAS HOLDING ONTO HAMMER TO HELP BALANCE IT WHILE JACKING CONCAVES OUT OF CRUSHER,THIRD FINGER RIGHT HAND GOT CAUGHT BETWEEN H AMMER AND CRUSH9R WALL.(APPROXIMATELY 1/4" OF THE FINGER WAS REMOVED AND STITCHES USED TO CLOSE THE END OF THE FINGER.)
EMPLOYEE WAS US3NG JACKHAMMER TO JACK CONCAVES AWAY FORM WALL OF GYRAPTORY CRUSHER WHEN A PIECE OF METAL WENT INTO HIS RIGHT SIDE. STITCHES REQUIRED AFTER METAL WAS REMOVED.
EMPL DRIVING TR5CK PIN INTO TACK OF ELEC SHOVEL.SWUNG AT PIN WITH SLEDGE HAMMER,MISSED AND STRUCK FINGER ON BOLT.5 STITCHES REQ IN FINGER.
1983 · 1 incidente
MR RAY WAS PARKED UNDER BINS WHILE LOADING TRUCK HE CLIMBED SIDE OF TRUCK TO CHECK FOR OVERSIZED STONE WHEN HE FINISHED CHECKING LOAD HE JUMPED DOWN FROM TRUCK INSTEAD OF CLIMBING DOWN LADDER AS HE JUMPED HIS RING BECAME CAUGHT ON EDGE OF FOPS CAUSING SEVERE LACERATION OF FINGER FINGER LATER HAD TO BE AMPUTATED