No 6 Coal

DATE AREA WAS DEVELOPED-04-22-02; LOCATION OF FALL: RETURN, ENTRY NO.1 SPAD NO.470-480; DISTANCE FROM ACTIVE FACE: 5600FT; NO PERSONAL INJURIES OR EQUIPMENT INVOLVED; SIZE:L-50' W-17'; H-6/7'; TYPE AND LENGTH OF ROOF SUPPORT: RESIN, STRATA: SHALE, SANDSTONE, MIXED, LAMINTATED; ENTRANCES HAVE NOT BEEN BREAKERED OFF, WILL NOT BE REHAB.

LOCATION OF FALL:NO.5 HEAD DR.NO.3 ENTRY; SAPD NO 502; DISTANCE FROM ACTIVE FACE:9000FT; NO PERSONAL INJURIES OR EQUIP INVOLVED; AIRWAY:NEUTRAL; SECONDARY ESCAPEWAY, CAN GET AROUND, SIZE: L-16FT, H-12FT; W-16FT; TYPE OF ROOF SUPPORT:RESIN; ENTRANCES ARE NOT BRKERED OFF; AREA WILL BE REHABILITATED; NO CRIBS OR TIMBERS BUILT PRIOR TO FALL

Stepped out of truck onto gravel lot at mine site. Slipped and fell - felt back pain.

Employee states, injury and other ee were loading the roof bolter, when he cut the bands on the bolts the band srung back striking him on the left hand. He was wearing gloves.

Lifting blocks, to build brattice and pulled his groin. He began missing work on 10/10/08. He had surgery.

While carrying belt structure to track entry, EE got his foot stuck in mud and twisted his back.

6/25/08 EE called to say he was unable to work. He said on 6/23 he was loading the TC sprayer (plaster machine) & liquid shot into face & eyes. I asked about safety glasses. He said he broke them, they were on his head but not on his eyes. His eyes were washed at work. He returned next day though his eyes were a little swollen. Today they're swollen worse & he is going to dr.

Prying on jack pin, slate bar slipped twisting his right shoulder. He fell to the ground on same shoulder. Began missing work on 10/12/08. He had surgery.

Fall loc.Entry No.6 Spad No.3 Brks. inby 1373;Dist. from active face 8500'; Airway:intake; Stopping line will be set over and life line reestab. Size: L55';W19';H3.5-4'; Roof sup.:Resin;No cribs or timbers installed prior to fall; Strata:mixed, lam.;NO coal rider seam; All entrance to fall brk. off; Area will be rehab.;Fall will be cleaned up when new miner and bolter is at face.

Fall occurred at 1:52 am. Fall secured. Located 4 cc iby portal in the intake. Size 17*20*10. Escapeway blocked.

Employee was getting off the bus, fell and landed on his back on the SCRS.

Employee was trimming belt; knife slipped cutting left wrist.

Employee was walking checking belts, stepped on coal or rock and twisted right knee.

The coal hauler had a sharp piece of metal; employee brushed his right hand against it. Went to hospital rec. 5 stitches

Employee was passing thru curtain and bumped his head on scoop. ***NOTE***Employee did not seek medical attention until 05-12-2006. Started missing work 05-13-2006

Moving roof bolter out of the way when his left wrist came in contact with roof plate causing plate to cut his left wrist

Entry No. 7, spad No. 1482 - 2 breaks inby. Airway-intake; Size of fall: l -50', w- 18', h - 4'. No cribs or timbers installed prior to fall. Type of strata: shale, laminated, wet. No coal rider seam present. All entrances are breakered off. Area will not be rehabilitated.

Rock rolled off top of a roof fall that employee was bolting up. Rock struck him on the left ankle and knocked him into the ATRs on the bolter

Distance from active face:6600'; Location: No.4 belt,entry 4, spad no.4930. Airway: neurtal, Size: L-70',W-18', H-8'. Type & length of suport: resin. Strata: mixed, laminated. No coal rider seam present.All entrances are breakered off. Area will be rehabilitated.

Size of fall: length 20ft. width 30ft. height 4ft. Roof support: resin. Number of cribs /timbers installed prior to fall - none. Type of strata: shale/laminated. No coal rider seam present. All entrances are breakered off, area of roof fall will be rehabilitated. Distance from active face: 2300ft. No personal injuries involved.

size of fall: length 20ft width 16 height 4ft. roof support: resin strata: shale, laminated, wet. no coal rider seam present

Employee was standing beside the belt head KVA when it went to the ground causing an electrical flash, burning arms and face.

Draw rock fell hitting ee on back and head.

SIZE OF FALL: 20'X16'X4'; TYPE AND LENGTH OF ROOF SUPPORT: RESIN 4'. NUMBER OF CRIBS/TIMBERS INSTALLED PRIOR TO FALL: NONE. TYPE STRATE: SHALE. ALL ENTRANCES DREAKERED OFF. AREA WILL BE REHABILITATED. AIRWAY NEUTRAL. DISTANCE FROM ACTIVE FACE 603'

Entry No. 6; distance from active face- 10,200 ft. Airway- intake; size: length 22 ft width 20' height 4 1/2 ft to 5 1/2 ft. 48 " resin, 2 cribs installed prior to fall. Shale, laminated, all entrances breakered off.

MUD AND ROCK

NOT SURE, WENT TO DR DUE TO BEING SICK. THEY ASKED IF HE HURT, HE SAID HIS BACK HURT FROM RUNNING HYDRAULIC DRILL. HE THEN TOLD ME IT WAS FROM MOVING BELT STRUCTURE.

HE WAS GATHERING UP OLD SPLICES, CLEANING AROUND HEAD, SLIPPED, FELL, TRIED TO CATCH HIMSELF. HE HIT HIS HAND ON ROCK, CUTTING LEFT HAND.

CUTTING BELT FOR SPLICE, HE CUT HIS LEFT LEG (FOUR STITCHES).

ROOF FALL 6' X 18' X 40' IN FACE AREA OF PANEL. PULLED OFF PANEL. FALL WAS 2 BREAKS INBY 1408.

NORMAL CONDITIONS HE RAISED UP, GOT BACK AGAINST ROOF PLATE, CUT BACK.

EMPLOYEE, SITTING ON A SHUTTLE CAR, TOOK HIS FEET AND PUSHED THE MINER CABLE OUT OF THE WAY. HE SPRAINED HIS KNEE PUSHING ON THE MINER CABLE.

ROOF FALL IN 2 & 3 ENTRY ON RETURN & ROADWAY.

ROOF FALL IN #4 ENTRY SPAD 421.

Hurt back while trying to hang miner cable.

ROOF FALL IN H1 ENTRY AT SPAD 413.

He was traveling the roadway on a 3 wheeler down #3 when a rock fell and hit his (r) side. said there was blood in his urine, and his hip & ribs were hurting

He was in #2 entry loading pin supplies. He picked up glue and pulled something in his back.

ROOF FALL IN THE #5 ENTRY AT SPAD 410 INBY 2 CROSS CUTS.

EMPLOYEE WAS WALKING DOWN #6 ENTRY 2 BREAKS IN BY SPAD #677 WHEN A PIECE OF DRAW ROCK FELL STRIKING HIM ON THE HEAD AND LEFT SIDE OF FACE.

EE ALLEGES HE WAS PINNING TOP. HE SLIPPED UNDER PINNER AND POT FELL ON KNEE.

ROOF FALL IN THE #1 ENTRY AT SPAD #508, FIRST LEFT OFF OF 3RD RIGHT.

ROOF FALL APPROX. 100' LONG, 20' WIDE, 10' HIGH.80' OUTBY SPAD NO. 421 ON #2 BELT CONVEYOR.

THIS REPORT FILED FOR COMPLIANCE ONLY. IFC FEELS THIS IS A FRAUDULANT CLAIM EMPLOYEE ALLEGES ON THE WORKER'S COMP FORM ELECTRICAL CONTACT BUT STATES TO FOREMAN NO CONTACT WAS MADE AND NO INJUR Y REPORT COMPLETED.

DRAW ROCK SLIPPED FROM TOP AND HIT LEFT ARM. EE CONTINUED TO WORK AND WORKED NEXT DAY. FILED FOR COMPLIANCE. IFC FEELS LOST TIME NOT DUE TO THIS INJURY.

FALL FOR 2 BREAK, STARTING 0439 SPAD INBY 2 BREAKS.

EE ALLEGES WHILE LIFTING A BOX OF GLUE HE FELT PAIN IN HIS BACK.

ROOF FALL, 3 BRKS. OUTBY #2 HEAD DRIVE. 15' WIDE, 25' LONG, 3-4' HIGH.

EE WAS DUMPING THE GOB OUT OF THE SCOOP BUCKET IN ORDER TO LOAD SUPPLIES. WHEN HE SWUNG THE SCOOP AROUND HIS HAND GOT BETWEEN THE SWING STOPS OF THE SCOOP.

EMPLOYEE WAS HELPING REPAIR THE R-BOLT MACHINE. HE WAS USING A LARGE WRENCH TO REMOVE A CONNECTION ON THE MACHINE, AND IN ORDER TO DO THAT HE PULLED UP ON THE WRENCH FOR MORE LEVERAGE. WHEN HE DID THAT HE FELT PAIN IN THE GROIN AREA. EMPLOYEE JUST RETURNED TO WORK FROM A SIMILAR INJURY AT ANOTHER JOB SITE. HE RE INJURED AN OLD INJURY.