Employee was getting up from chair-chair moved causing him to fall & injure ankle.
No 6: 473 MSHA citations Coal
No 6 has $307K in proposed MSHA penalties and $3K outstanding across 16 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at No 6.
- Fatalities
- 0
- Total incidents
- 52
- Years on record
- 2001–2011
- Latest incident
- Dec 2011
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.No 6 has $307K in proposed MSHA penalties and $3K outstanding across 16 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 51 · 93%
- Stood as issued 4 · 7%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| WEVA 2008-1544 | Settlement | Barbour | 2011 | $105K → $50K |
| WEVA 2006-310 | Settlement | Bulluck | 2008 | $32K → $9K |
| WEVA 2008-1224 | Settlement | Miller | 2009 | $21K → $5K |
| WEVA 2008-1082 | Settlement | Melick | 2010 | $17K → $10K |
| WEVA 2008-126 | Settlement | Bulluck | 2010 | $11K → $8K |
| WEVA 2008-1401 | Settlement | Weisberger | 2009 | $7K → $3K |
MSHA sampling at No 6 shows 97% of 426 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2009-01-10, 17 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR238
- SHUTTLE CAR OPERATOR (STANDARD SIDE)49
- SCOOP CAR OPERATOR33
Silica (quartz)
Last sampled: 2008-10-29, 17 years ago- CONTINUOUS MINER OPERATOR15
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2008-10-22, 17 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- CONTINUOUS MINER OPERATOR5
- ROOF BOLTER (SINGLE HEAD)3
- SHUTTLE CAR OPERATOR (STANDARD SIDE)3
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2009 | 100% | 5 |
| 2008 | 98% | 64 |
| 2007 | 94% | 63 |
| 2006 | 98% | 45 |
| 2005 | 94% | 53 |
| 2004 | 96% | 48 |
| 2003 | 100% | 61 |
| 2002 | 100% | 56 |
| 2001 | 100% | 31 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2008 | 6.5 | 4 |
| 2007 | 8.2 | 3 |
| 2006 | 5.7 | 1 |
| 2005 | 8.8 | 6 |
| 2004 | 9.9 | 2 |
| 2003 | 6.5 | 1 |
| 2002 | 8.3 | 1 |
| 2001 | 8.0 | 3 |
| Year | over PEL | samples |
|---|---|---|
| 2008 | 17% | 6 |
| 2007 | 20% | 5 |
| 2003 | 20% | 5 |
| 2001 | 20% | 5 |
No 6 recorded 6.75 reportable injury cases per 100 full-time workers in 2008.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2008 * | 6.75 | 4.50 | 0.000 |
| 2007 * | 9.03 | 4.52 | 0.000 |
| 2006 * | 7.85 | 5.23 | 0.000 |
| 2005 * | 5.53 | 5.53 | 0.000 |
| 2004 * | 18.07 | 12.05 | 0.000 |
| 2003 * | 7.10 | 7.10 | 0.000 |
| 2002 * | 7.87 | 7.87 | 0.000 |
- Taurus Coal Company Inc 1992 to 2001
- Copperas Coal Corp 2001 to 2001
- Island Fork Construction Ltd., Inc. 2001 to 2002
- North Star Contractors Incorporated 2002 to 2005
- Laurel Creek Company Inc 2005 to 2009
- Aracoma Coal Company Inc 2009 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2014 | 0 | |
| 2013 | 0 | |
| 2012 | 0 | |
| 2011 | 0 | |
| 2010 | 1 | |
| 2009 | 6 | 16,327 |
| 2008 | 44 | 254,393 |
| 2007 | 36 | 348,949 |
| 2006 | 33 | 356,243 |
| 2005 | 40 | 164,626 |
| 2004 | 54 | 162,771 |
| 2003 | 41 | 191,913 |
| 2002 | 39 | 200,475 |
| 2001 | 31 | 58,344 |
No 6 sits in Mingo County, West Virginia, where the Census mining category is 15.0% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2014 Q4 | 0 | 0 | 0 | |
| 2014 Q3 | 0 | 0 | 0 | |
| 2014 Q2 | 0 | 0 | 0 | |
| 2014 Q1 | 0 | 0 | 0 | |
| 2013 Q4 | 0 | 0 | 0 | |
| 2013 Q3 | 0 | 0 | 0 | |
| 2013 Q2 | 0 | 0 | 0 | |
| 2013 Q1 | 0 | 0 | 0 |
Show 47 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2012 Q4 | 0 | 1 | 0 | |
| 2012 Q3 | 0 | 0 | 0 | |
| 2012 Q2 | 0 | 0 | 0 | |
| 2012 Q1 | 0 | 0 | 0 | |
| 2011 Q4 | 0 | 0 | 0 | |
| 2011 Q3 | 0 | 0 | 0 | |
| 2011 Q2 | 0 | 0 | 0 | |
| 2011 Q1 | 0 | 0 | 0 | |
| 2010 Q4 | 0 | 0 | 0 | |
| 2010 Q3 | 0 | 0 | 0 | |
| 2010 Q2 | 242 | 6 | 4 | 24793.4 |
| 2010 Q1 | 420 | 0 | 0 | 0.0 |
| 2009 Q4 | 143 | 1 | 0 | 6993.0 |
| 2009 Q3 | 0 | 10 | 3 | |
| 2009 Q2 | 1,065 | 4 | 2 | 3755.9 |
| 2009 Q1 | 11,667 | 7 | 2 | 600.0 |
| 2008 Q4 | 23,488 | 43 | 14 | 1830.7 |
| 2008 Q3 | 20,587 | 38 | 11 | 1845.8 |
| 2008 Q2 | 22,209 | 18 | 4 | 810.5 |
| 2008 Q1 | 22,589 | 11 | 5 | 487.0 |
| 2007 Q4 | 21,627 | 17 | 9 | 786.1 |
| 2007 Q3 | 22,564 | 8 | 4 | 354.5 |
| 2007 Q2 | 23,138 | 10 | 4 | 432.2 |
| 2007 Q1 | 21,254 | 9 | 6 | 423.4 |
| 2006 Q4 | 21,124 | 10 | 5 | 473.4 |
| 2006 Q3 | 20,076 | 1 | 0 | 49.8 |
| 2006 Q2 | 19,597 | 0 | 0 | 0.0 |
| 2006 Q1 | 15,632 | 7 | 2 | 447.8 |
| 2005 Q4 | 19,450 | 4 | 1 | 205.7 |
| 2005 Q3 | 19,542 | 14 | 1 | 716.4 |
| 2005 Q2 | 18,998 | 13 | 3 | 684.3 |
| 2005 Q1 | 14,307 | 7 | 1 | 489.3 |
| 2004 Q4 | 16,470 | 22 | 11 | 1335.8 |
| 2004 Q3 | 15,898 | 12 | 2 | 754.8 |
| 2004 Q2 | 15,072 | 14 | 1 | 928.9 |
| 2004 Q1 | 18,950 | 17 | 3 | 897.1 |
| 2003 Q4 | 21,883 | 12 | 4 | 548.4 |
| 2003 Q3 | 21,850 | 27 | 8 | 1235.7 |
| 2003 Q2 | 20,931 | 27 | 9 | 1290.0 |
| 2003 Q1 | 19,884 | 14 | 5 | 704.1 |
| 2002 Q4 | 19,614 | 10 | 5 | 509.8 |
| 2002 Q3 | 19,334 | 5 | 0 | 258.6 |
| 2002 Q2 | 18,865 | 4 | 0 | 212.0 |
| 2002 Q1 | 18,443 | 5 | 1 | 271.1 |
| 2001 Q4 | 7,227 | 18 | 6 | 2490.7 |
| 2001 Q3 | 17,911 | 14 | 6 | 781.6 |
| 2001 Q2 | 5,138 | 1 | 1 | 194.6 |
Reportable incidents
52 on file2011 · 2 incidents
Employee leaving mine office. As he stepped onto first step he stepped on gravel causing him to slip & fall onto the gravel lot. Hurt left hip & low back.
2009 · 2 incidents
DATE AREA WAS DEVELOPED-04-22-02; LOCATION OF FALL: RETURN, ENTRY NO.1 SPAD NO.470-480; DISTANCE FROM ACTIVE FACE: 5600FT; NO PERSONAL INJURIES OR EQUIPMENT INVOLVED; SIZE:L-50' W-17'; H-6/7'; TYPE AND LENGTH OF ROOF SUPPORT: RESIN, STRATA: SHALE, SANDSTONE, MIXED, LAMINTATED; ENTRANCES HAVE NOT BEEN BREAKERED OFF, WILL NOT BE REHAB.
LOCATION OF FALL:NO.5 HEAD DR.NO.3 ENTRY; SAPD NO 502; DISTANCE FROM ACTIVE FACE:9000FT; NO PERSONAL INJURIES OR EQUIP INVOLVED; AIRWAY:NEUTRAL; SECONDARY ESCAPEWAY, CAN GET AROUND, SIZE: L-16FT, H-12FT; W-16FT; TYPE OF ROOF SUPPORT:RESIN; ENTRANCES ARE NOT BRKERED OFF; AREA WILL BE REHABILITATED; NO CRIBS OR TIMBERS BUILT PRIOR TO FALL
2008 · 7 incidents
Stepped out of truck onto gravel lot at mine site. Slipped and fell - felt back pain.
Employee states, injury and other ee were loading the roof bolter, when he cut the bands on the bolts the band srung back striking him on the left hand. He was wearing gloves.
Lifting blocks, to build brattice and pulled his groin. He began missing work on 10/10/08. He had surgery.
While carrying belt structure to track entry, EE got his foot stuck in mud and twisted his back.
6/25/08 EE called to say he was unable to work. He said on 6/23 he was loading the TC sprayer (plaster machine) & liquid shot into face & eyes. I asked about safety glasses. He said he broke them, they were on his head but not on his eyes. His eyes were washed at work. He returned next day though his eyes were a little swollen. Today they're swollen worse & he is going to dr.
Prying on jack pin, slate bar slipped twisting his right shoulder. He fell to the ground on same shoulder. Began missing work on 10/12/08. He had surgery.
Fall loc.Entry No.6 Spad No.3 Brks. inby 1373;Dist. from active face 8500'; Airway:intake; Stopping line will be set over and life line reestab. Size: L55';W19';H3.5-4'; Roof sup.:Resin;No cribs or timbers installed prior to fall; Strata:mixed, lam.;NO coal rider seam; All entrance to fall brk. off; Area will be rehab.;Fall will be cleaned up when new miner and bolter is at face.
2007 · 5 incidents
Fall occurred at 1:52 am. Fall secured. Located 4 cc iby portal in the intake. Size 17*20*10. Escapeway blocked.
Employee was getting off the bus, fell and landed on his back on the SCRS.
Employee was trimming belt; knife slipped cutting left wrist.
Employee was walking checking belts, stepped on coal or rock and twisted right knee.
The coal hauler had a sharp piece of metal; employee brushed his right hand against it. Went to hospital rec. 5 stitches
2006 · 5 incidents
Employee was passing thru curtain and bumped his head on scoop. ***NOTE***Employee did not seek medical attention until 05-12-2006. Started missing work 05-13-2006
Moving roof bolter out of the way when his left wrist came in contact with roof plate causing plate to cut his left wrist
Entry No. 7, spad No. 1482 - 2 breaks inby. Airway-intake; Size of fall: l -50', w- 18', h - 4'. No cribs or timbers installed prior to fall. Type of strata: shale, laminated, wet. No coal rider seam present. All entrances are breakered off. Area will not be rehabilitated.
Rock rolled off top of a roof fall that employee was bolting up. Rock struck him on the left ankle and knocked him into the ATRs on the bolter
Distance from active face:6600'; Location: No.4 belt,entry 4, spad no.4930. Airway: neurtal, Size: L-70',W-18', H-8'. Type & length of suport: resin. Strata: mixed, laminated. No coal rider seam present.All entrances are breakered off. Area will be rehabilitated.
2005 · 6 incidents
Size of fall: length 20ft. width 30ft. height 4ft. Roof support: resin. Number of cribs /timbers installed prior to fall - none. Type of strata: shale/laminated. No coal rider seam present. All entrances are breakered off, area of roof fall will be rehabilitated. Distance from active face: 2300ft. No personal injuries involved.
size of fall: length 20ft width 16 height 4ft. roof support: resin strata: shale, laminated, wet. no coal rider seam present
Employee was standing beside the belt head KVA when it went to the ground causing an electrical flash, burning arms and face.
Draw rock fell hitting ee on back and head.
SIZE OF FALL: 20'X16'X4'; TYPE AND LENGTH OF ROOF SUPPORT: RESIN 4'. NUMBER OF CRIBS/TIMBERS INSTALLED PRIOR TO FALL: NONE. TYPE STRATE: SHALE. ALL ENTRANCES DREAKERED OFF. AREA WILL BE REHABILITATED. AIRWAY NEUTRAL. DISTANCE FROM ACTIVE FACE 603'
Entry No. 6; distance from active face- 10,200 ft. Airway- intake; size: length 22 ft width 20' height 4 1/2 ft to 5 1/2 ft. 48 " resin, 2 cribs installed prior to fall. Shale, laminated, all entrances breakered off.
2004 · 7 incidents
MUD AND ROCK
NOT SURE, WENT TO DR DUE TO BEING SICK. THEY ASKED IF HE HURT, HE SAID HIS BACK HURT FROM RUNNING HYDRAULIC DRILL. HE THEN TOLD ME IT WAS FROM MOVING BELT STRUCTURE.
HE WAS GATHERING UP OLD SPLICES, CLEANING AROUND HEAD, SLIPPED, FELL, TRIED TO CATCH HIMSELF. HE HIT HIS HAND ON ROCK, CUTTING LEFT HAND.
CUTTING BELT FOR SPLICE, HE CUT HIS LEFT LEG (FOUR STITCHES).
ROOF FALL 6' X 18' X 40' IN FACE AREA OF PANEL. PULLED OFF PANEL. FALL WAS 2 BREAKS INBY 1408.
NORMAL CONDITIONS HE RAISED UP, GOT BACK AGAINST ROOF PLATE, CUT BACK.
EMPLOYEE, SITTING ON A SHUTTLE CAR, TOOK HIS FEET AND PUSHED THE MINER CABLE OUT OF THE WAY. HE SPRAINED HIS KNEE PUSHING ON THE MINER CABLE.
2003 · 6 incidents
ROOF FALL IN 2 & 3 ENTRY ON RETURN & ROADWAY.
ROOF FALL IN #4 ENTRY SPAD 421.
Hurt back while trying to hang miner cable.
ROOF FALL IN H1 ENTRY AT SPAD 413.
He was traveling the roadway on a 3 wheeler down #3 when a rock fell and hit his (r) side. said there was blood in his urine, and his hip & ribs were hurting
He was in #2 entry loading pin supplies. He picked up glue and pulled something in his back.
2002 · 10 incidents
ROOF FALL IN THE #5 ENTRY AT SPAD 410 INBY 2 CROSS CUTS.
EMPLOYEE WAS WALKING DOWN #6 ENTRY 2 BREAKS IN BY SPAD #677 WHEN A PIECE OF DRAW ROCK FELL STRIKING HIM ON THE HEAD AND LEFT SIDE OF FACE.
EE ALLEGES HE WAS PINNING TOP. HE SLIPPED UNDER PINNER AND POT FELL ON KNEE.
ROOF FALL IN THE #1 ENTRY AT SPAD #508, FIRST LEFT OFF OF 3RD RIGHT.
ROOF FALL APPROX. 100' LONG, 20' WIDE, 10' HIGH.80' OUTBY SPAD NO. 421 ON #2 BELT CONVEYOR.
THIS REPORT FILED FOR COMPLIANCE ONLY. IFC FEELS THIS IS A FRAUDULANT CLAIM EMPLOYEE ALLEGES ON THE WORKER'S COMP FORM ELECTRICAL CONTACT BUT STATES TO FOREMAN NO CONTACT WAS MADE AND NO INJUR Y REPORT COMPLETED.
DRAW ROCK SLIPPED FROM TOP AND HIT LEFT ARM. EE CONTINUED TO WORK AND WORKED NEXT DAY. FILED FOR COMPLIANCE. IFC FEELS LOST TIME NOT DUE TO THIS INJURY.
FALL FOR 2 BREAK, STARTING 0439 SPAD INBY 2 BREAKS.
EE ALLEGES WHILE LIFTING A BOX OF GLUE HE FELT PAIN IN HIS BACK.
ROOF FALL, 3 BRKS. OUTBY #2 HEAD DRIVE. 15' WIDE, 25' LONG, 3-4' HIGH.
2001 · 2 incidents
EE WAS DUMPING THE GOB OUT OF THE SCOOP BUCKET IN ORDER TO LOAD SUPPLIES. WHEN HE SWUNG THE SCOOP AROUND HIS HAND GOT BETWEEN THE SWING STOPS OF THE SCOOP.
EMPLOYEE WAS HELPING REPAIR THE R-BOLT MACHINE. HE WAS USING A LARGE WRENCH TO REMOVE A CONNECTION ON THE MACHINE, AND IN ORDER TO DO THAT HE PULLED UP ON THE WRENCH FOR MORE LEVERAGE. WHEN HE DID THAT HE FELT PAIN IN THE GROIN AREA. EMPLOYEE JUST RETURNED TO WORK FROM A SIMILAR INJURY AT ANOTHER JOB SITE. HE RE INJURED AN OLD INJURY.