Santa Ana Metal/Non-Metal

Changing teeth in a bucket, a piece of metal came off and punctured his abdomen.

Lifting a pump, felt pain in his back.

Retrieving tools out of a building, closed the door and caught thumb in the door resulting in a fracture.

Placing a plate into a feeder when it slide off the bar and caught his finger.

While trying to adjust a fork on a forklift, the fork came down and struck the employee in the back of his hand. The injury required 5 stitches.

DRIVING SCRAPER CAT AND HIT LARGE HOLE IN LAND. CAUSE INJURY TO LOWER BACK AREA. EE WAS SEAT BELT IN SEAT PRVEST INJURY TO LOWER BACK IN YEARS PAST.

EE TURNED MOTOR BY HAND, CAUGHT THE TIP OF HIS RIGHT FINGER.

TIGHTING BOLTS OF ADJUSTMENT SHEAVE ONT HE CRUSHER BEFORE THE SHEAVE COMPLETE STOPPED TURNING GLOVE CAUGHT IN THE SHEAVE, PULLED HAND INTO SHEAVE.

EMPLOYEE WAS SHOVELING CLOSE TO RETURN ROLLER ON CONVEYOR WHEN HANDLE OF SHOVEL GOT CAUGHT IN RETURN ROLLER.

EE WAS DOING PREINSPECTION ON END DUMP TRUCK. WALKED AROUND MACHINE, EE SLIPPED ON ICE CAUSINGINJURY.

EE WAS INSTALLING A BEARING ON TAIL PULLEY ON CONVEYOR WITH RATCH COMLONG TO ADJUST SHAFT BACK. COMELONG CABLE BROKE CAUSING LIFT INDEX FINGER TO BPINCHED BETWEEN BEARING HOUSING AND FRAME OF CONVEYOR.

EMP WAS PUNCHING BOLTHOLES IN RUBBER LAGGING FOR A BELT WIPER WHEN THE PUNCH SLIPPED, CAUSING THE HAMMER HEAD TO STRIKE LEFT THIRD FINGER.

EMPLOYEE WAS INSTALLING RUBBER LAGGING ON B-2 CONVEYOR BELT. TWISTED HIS NECK AND PINCHED A NERVE IN NECK. ACCIDENT NOT REPORT TILL 8/19/95.

HE WAS CLEANING SLAG WITH CHIPPING HAMMER UNDER J DISK CRUSHER- A PIECE OF STEEL LODGED IN LEFT EYE.

RICHARD WAS DUMPING THE 862 SCRAPER ON FILL, HIT POT HOLE. INJURED HIS NECK.

EE WAS CLIMBING ON THE 66 CRUSHER WHEN HE STRUCK HIS KNEE ON THE LOWER PART OF NETROGEN CYLINDER

EE WENT UP TO STOCK PILE SLIPPED AND FELL HITTLING CONVEYOR EE WAS INSTRUCTED NOT TO GO UP STOCK PILES SUPERVISOR DOES NOT KNOW WHY EE WAS DOING UP THERE.

EE WAS CLEANING OUT A CONE, BY SHOVELING DIR. HE SLIPPED AND TWISTED HIS BACK.

EMPLOYEE WAS WATERING DOWN PIT. WHEN SHE HIT A BUMP ON THE WATER TRUCK, HER HEAD BOUNCED FOREWARD AND THEN BACKWARDS. CAUSING THE INJURY. EMPLOYEE DID NO NOTITY EMPLOYER TIL 10-5-93.

EMPLOYEE WAS DISMOUNTING HIS TRUCK. BEFORE DISMOUNTING, HE DROPPED HIS SCOTCH BLOCKS TO THE GROUND. WHEN HE STEPPED FROM HIS LADDER, HE STEPPED ON ONE OF THE SCOTCH BLOCKS AND FELL, HITTING HI S HEAD ON THE BUMPER.

TAKING WHEEL APART WITH HOIST, HAD TO PULL BULLGEAR BY HAND STRAINING ABDOMINAL AREA.

EMPLOYEE WAS REMOVING CLAY FROM A 36 FT FIELD CONVEYOR, TURNED AND PULLED MUSCLE IN LOWER BACK.

EMPLOYEE WAS CLEAING TAKE-UP UNIT ON STACKER BELT. HE MOVED AND RIGHT FOOT SLIPPED AND HIT CROSS BEAM.

EE WAS CRAWLING UNDER THE FEEDER HIT HIS KNEE ON W CROSS BEAM JOING INTO THE FEEDER.

WAS TWISTED LOOKING BACK LOADING THE PAN ON THE SCRAPER, RAN OVER AND ROCK THE TRACTOR SHOOK AND BACK POPPED.

REMOVING DIFFERENTIAL PLATE WHEN IT SLIPPED AND FELL, DROPPING ONTO KNEE.

PC SLAG FLEW OFF GRINDER IN L EYE

REMOVING SCREENS FROM SCREEN DECK.

STEPPED OFF TRUCK SLIPPED ON STEP AND BUMPED KNEE.

HELPING UNLOAD SCREENS ONE MAN DROPPED HIS SIDE OF SCREEN CAUSING SHOULDER DISOMFORT TO VICTIM.

EMPL WAS BENT OVER WELDING WHEN PAIN STARTED IN HIS LOWER BACK

EMPLOYEE WAS USING A WEDGE TO PULL METAL DOWN IT FLEW OUT & CUT INDEX & MIDDLE FINGER ON LEFT HAND