Buscar en el registro

While moving an electric motor to a cart, the motor shift, smashing the tip of the IW's left thumb resulting in a abrasion and a fracture.

EE noticed the forklift EE was operating was running low on propane, so EE decided to replace the almost empty propane cylinder. As EE was putting the empty propane cylinder in the slot, EE's right ring finger was caught in between two propane cylinders and felt a sharp pain on EE's finger. EE ended up with a deep laceration on EE's right ring finger.

During the process of replacing clips (brackets) in the Filter Press, EE was accessing the area behind the door to install on clips, when they suddenly twisted their right ankle.

EE had clocked out and was in the contractor parking lot at EE's car. EE removed EE's boots and banged them together to shake off excess mud, dirt, and lime, which got into EE's left eye.

Loadout operator was starting the process of opening lids of a OTR truck at that time EE twisted ankle and fell.

Employee was cleaning a chute and their hand was jammed into the side of the chute opening, causing a cut on their right index finger. The employee received 4 stitches at the ER. No restrictions were issued and returned to work full duty.

As an employee was attempting to climb into the back of a cargo trailer, their shoulder dislocated.

Preparing to do clean up on top of a bin by removing the grating and stepped into a hole scrapping shin.

Scraping / cleaning hydrator product chute / duct. After initially seeing Occupational Medicine department, with no pain not resolving, employee was referred to an MRI and saw an Orthopedic surgeon on 4/14/25 and was put on work restrictions and scheduled for surgery.

While moving equipment, the EE pick up an electrical box and swung it to the opposite side of the room. While swinging the box, their glove became stuck. The momentum carried them to the wall, and they jammed their neck. EE was put on restricted duty on 2/12/25.

Tripped over pipe while carrying samples. Worked without restriction until surgery on 4/23/2025.

EE was on 3 person team changing V-Belts at Impact Crusher. Hand rolled under pulleys while pulling belt. Right thumb fractured from pinch point.

Injured employee was opening hatch lids on top of trucks when they strained their back. Employee was working with case management for remedies when they decided to be seen by a doctor which then elevated case to reportable.

Miner was on top of the rail car opening the lids and strained ligaments of lumbar spine.

IE was raking scale from kiln #4 when EE felt a sharp pain in right elbow. When IE returned to control room, IE noticed numbness in right hand. IE was diagnosed with strained right elbow. IE was prescribed PT on 8/9/2024.

Two employees were opening the hood of a dump truck. One of the employees stepped to the front of the truck to prevent the hood from moving too far forward and breaking the hinges of the hood. EE ended up taking the weight of the hood and this resulted in a small tear in EE's right bicep. EE is under lifting restrictions until an orthopedic appointment.

EE and a co-worker came to my office to report an injury that happened. EE stated that EE woke up this morning with back hurting, take ibuprofen 3x/day as needed. Apply ice pack 2-3x/day as instructed. EE stated EE was shoveling limestone dust off the top of Silo #4 for 1.5 to 2 hours, when EE felt a sharp pain in EE's mid back. EE said it was hard to breathe because of the pain.

EE was working on replacing screens on the scrubber screen. The top deck oversize grizzly panel was removed and set on the inspection bench. While pulling the screen panel out, the screen caught the grizzly panel which then fell on the mechanics left foot.

Driver was having trouble with the automatic tarp on their trailer. Driver climbed onto the step on the trailer and started working on the wiring going to the motor that controls the tarp. The driver fell from the step and landed on their back ion the ground of compacted crushed limestone.

Employee was climbing a ladder when EE felt a pop in the right wrist. EE experienced no pain until the following day.

EE tasked with cleaning spray lance, 2 man job. Did it by self. Lifting a support up felt a pop in right shoulder, continued to work, shortly after EE's right hand was numb and hurting.

IE was replacing a g-bolt on a screw conveyor gear box, after locking out the screw the IE attempted to rotate the screw to line up the bolt holes. IE did this by grabbing the drive belts to rotate the shive. This pulled the IEs right ring finger in to a pinch point causing a laceration that required 3 stitches.

IW was positioning drums on a pallet and smashed their right little finger between two drums resulting in a fracture.

Employee worked on multiple jobs this day. One of them involved replacing a gearbox on a screw conveyor. Employee noticed EE's back was sore after carrying the gearbox up the screw conveyor.

Employee was changing brake pads on a haul truck. As the employee lifted the caliper up EE attempted to slide a jackstand under it. EE's hand slipped off of the caliper and it dropped catching right ring finger between the jackstand and caliper. Employee suffered a broken right ring finger.

IW was moving a pallet from a stack to the floor, dropping it on the ground. Pallet tipped forward striking the employee's wrist causing injury

Employee was climbing into the roofbolter. EE grabbed the handle with the left hand and pulled themselves up when a sharp pain developed between the left elbow and left shoulder. EE put on restricted duty.

Employee was moving a shim plate into place when it slipped out of employee's hand causing the approximately 300lbs plate to fall on employee's finger smashing the tip of it.

EE was working on preparing a media batch. Incident occurred when coworker was placing media barrel off the dolly. The barrel slipped while it was getting unloaded. EE at the time was guiding the barrel of dolly and the slipped barrel crushed EE's finger between another barrel.

EE was carrying 5-gallon fuel cans up top the warming heaters and strained shoulder.

Miner was replacing drill steel on a bench drill when pinched thumb between two pieces of drill steel.

Employee was retrieving a 5 gallon bucket of stone from an automatic sampler and while attempting to pick it up, felt a pain in EE's back. Employee initially reported it but did not want immediate medical attention. Showing no improvement employee returned to Occ. Med on 9/20/22 and has been subscribed further treatment for physical therapy.

A mechanic was replacing a conveyor belt in the lime plant. Lime fell from the upper level onto the mechanic's goggles. When the mechanic adjusted the goggles, lime fell into eye. After flushing the eyes on-site, the mechanic was taken to a doctor, prescribed 7 days of a prescription eye medication, and released to full duty for next scheduled shift.

Maintenance employee was putting a belt on the pulley moving it forward to align it with both hands. The tip of the leather glove initially got caught between the belt and pulley, the forward motion caused fingertip to be pulled in approximately 1". The left index fingertip had the fingernail ripped partially required 4 stitches.

Two Maintenance Technicians were unloading 8 X 8 X 48 long Treated lumber wood blocks for the track pedestrian crossing. They were sliding blocks out of the back of a pickup, when one of the blocks slipped out of the grip of the injured EE. The block fell onto their right thumb. The injured EE went to the ER and diagnosed with a hairline fracture of the first digit of the thumb.

EE was lifting a flight from a scraper into a loader bucket when the flight slid back and hit EE's left foot right behind the steel toe protector, breaking EE's left toe.

After changing out conveyor return rollers the injured when to dispose of the rollers. While putting the rollers in the dumpster the injured stated that they felt a strain in right arm. The injured did not report the possible injury to management. Around two weeks later, the injured reported the injury to their Manager. Injured had surgery on 4/3/2023.

Employees were reinstalling the belly pan on the undercarriage of the dozer. The rigging on the belly pan slipped allowing it to swing back down and pin the mechanic. The mechanic was diagnosed with three fractured ribs. Mechanic received a restricted work designation to lift no more than 20 lbs. and is due back to the doctor on 8/11/2021 to follow up.

Employee felt a pop in right shoulder while raking kiln. X-ray showed no breaks. Follow up with ortho on 5/4/21 resulted in pain medicine and a sling. Awaiting further diagnostic procedures.

Employee bent down to pick up 50lb weight to calibrate the warehouse scale. They picked the weight up about half way before they felt a sharp pain in groin area and it radiated down the leg. The employee suffered a strained groin and was put on to restricted duty after seeing a doctor.

EE was engaged in the process of rolling out lay-flat hose when they caught the toe of boot on a small rock falling forward landing on right side. EE tried to catch themselves with right hand, however hand slid in wet material that was present. EE had multiple hair line fractures to ribs on right side and was restricted from normal work activity.

Common carrier departed site MSHA ID site and was on access road using another MSHA ID site equipment to confirm cargo trailer ports on top were sealed. While pulling device to inspect top of trailer, driver injured shoulder. We are reporting this as it was reported to us well after the incident (2/18) and it does not appear to be connected to our operation.

Miner works in bagging department and is unsure what may have caused is right forearm to hurt starting on 12/16/2020. The miner informed supervisor on 12/21/2020 and was sent for medical evaluation. Miner was diagnosed with tendinitis on right arm, given anti-inflammatory medication, and put on restricted work duty until 12/30/2020.

Employee was putting crib block behind the global pump tire, and EE pinned finger between the crib block and trailer.

On 11/5/20 an employee was throwing sample bags into a dump hopper and felt EE's knee pop. EE's knee hurt for the remainder of EE's shift. At this point, EE feels EE does not want to seek medical care. The employee was taken on 5/26/2021 to Occ Med at Jackson TN. EE has been referred to an Orthopedic Physician in Paris for an MRI. EE received a prescription for Prednisone.

The injured employee was helping a another Miner smash empty 55-gallon drums, and putting them in the loader bucket. EE lifted an empty drum which weighed approximately 20 lbs, and twisted body to put it in the bucket. EE then felt a sharp pain go up EE's back.

Employee was stacking finished material bags onto pallets off the conveyor. As EE picked up a bag and turned to place the bag on the pallet, EE felt a pop and sharp pain in EE's right chest/ribs. EE immediately fell to the floor and called for help. The doctor diagnosed EE with a muscle strain in EE's right thorax wall in the ribs.

EE working on 3 and 4 coal long belt, tied off, 3 points of contact. Climbing now heard a pop noise left shoulder and pain. Went to Doc on 9/4/2020, restrictions given.

Employee was performing an alignment on a lime kiln when they came in contact with Lime dust which resulted in lime burn to right arm and neck. Employee reported this incident on 4/1/20.

Employee was changing the battery on a loader when the lid of the battery box fell striking a finger. The tip of the ring finger sustained a fracture.