Buscar en el registro

He was removing a boom cylinder pin and as he drove the pin out, the broken section started to fall towards his lower leg. He reached out to grab the pin and the broken edge of the pin cut his hand.

Employee was kneeling down, moving some rocks. When he stood back up he heard a pop in his back.

In the process of moving the water pump. The terminal end of the cable is attached to a concrete block. When the employee was attaching a second cable to a chain, the concrete block rolled over and onto employee's left leg.

While repairing springs on hopper gate, it wouldn't shut, so he lifted it and it slammed shut on his right hand index finger.

Changing cutting edge, went to flip new one over and over to move closer to work area, and it flopped back on left foot causing a contusion.

Employee was holding a piece of steel (crusher mainframe liner) underneath crusher #2. The piece of steel was held on to the mainframe by some welds. As the other non injured employee was cutting it off, the steel recoiled and pushed injured employee's arm back into his shoulder.

EE was removing a guard on the field conveyor, the guard was heavy, the guard slid out of his hand. He did have work gloves on but did receive lacerations. Next time when removing a guard, ask for assistance.

Initial reported as First Aid only. On 4/2/2008 went to a Restricted Duty case and became reportable. Had been seen by two previous Doctors and released without treatment. Was installling a new deck frame on #6 screen tried to push deck into place. He felt that he may have strained a muscle in back of left shoulder.

While installing grating onto a catwalk for a new conveyor section. Injured employee had his finger pinched between the grating and angle support member of the catwalk.

EE strained his right shoulder while shoveling debris from the Tail Pulley of a conveyor.

Employee came into my office on the 2nd of Aug. complaining of irritation in his eye that happened on the 1st of Aug.

Employee was removing rock from conveyor belt in pit. Rock slipped out of hand and smashed tip against conveyor frame causing tip of finger on left hand to swell.

Replacing idler on CB2 tail section. As EE was tryng to line up the idler frame with the conveyor frame, the idler slipped off the frame hitting EE's finger.

Employee was shoveling off spill material by 7 foot crusher and sustained lower back pain.

Employee was lifting a 5 Gal container, shoulder height. As he lifted the container he felt a small twinge in his left forearm.

EE's by-passed safety devices on a raised cab, which created an unsafe act. Additionally, the injured EE attempted a single man lift where a team lift is applicable.

Employee bent down to get oil out of 55 gal drum and when stood up right knee popped and felt pain.

Lifting steel, felt pull of back.

EE lifted large rock. Felt sharp pain in shoulder (left) approx. 1 hr. later.

EE was resting a 20 am motor on a handrail while still confected to the pully system, as employee tryed to move motor to the ground. The motor slipped off the rail pinching his hand in between the hand rail and the motor shaft.

Individual was removing the cutting edge on a bull dozer. He was attempting to hold the head of a bolt while removing the nut. The bolt spun cutting the middle finger on the right hand.

Employees were lifting a portable metal stairway into a semi-trailer for transport. As he slid it into the trailer, a piece of metal caught his right index fingernail and cut it open. Needed numerous stitches to close the wound.

Employee was lowering pump into hole with a cable that was overlapped and the cable let loose jerking employee's arm.

EE WAS SPLICING BELT AND STRAINED HIS BACK.

Manually pulling product hose (50-80lbs.) out of boreholes 40-60 tmes a day, hurt back/neck.

EMPLOYEE OPENED A CAP TO A PIPE THAT WAS UNDER PRESSURE DUE TO BEING PLUGGED. HOT WATER SHOT OUT OF PIPE AND BURNED HIS FACE.

Employee was starting up gravel shaker. He swung his right arm around, striking middle finger against metal object tearing off part of finger nail. Remainder of nail had to be removed and nail bed stitched.

Employee was cleaning the battery terminals on the gen set. As he was using the brush to scrub the post, some of the acid flew up and struck him in the cheek then behind his safety glasses and into his left eye.

Employee was closing a garage door and caught his finger in a pinch point. The tip of the left middle finger was cut off.

EE was bent over cleaning under a conveyor. when he twisted he felt a sharp pain in his lower back. diagnosis is a lumbar sprain.

While pushing a roller back into its bracket with force, roller in hand slipped hitting a piece of metal.

Employee was working on his drill hammer. He bent down to stand it up on end when he had a sharp pain to his lower back.

Opening the tail gate of a service truck, the gate fell and pinched the employee's right right ring finger between the tail gate and tht pintal hook of the truck's hitch. This report was orginally filed electronically on 12/21/2004. I find not record in the system. I do have a hard copy. I need to update restricted duty days.

Employee was removing a tail pulley guard with another employee when he slipped and the weight of the guard exerted on his arm caused a torn rotator cuff.

Setting screen box, crane raised. While raised employee reached up to check the load to twist it, and pinched his right thumb.

While putting on additional wraps to the timber head, a sudden release of tension on the rope occurred. This caused injury to both hands and left arm.

EE GOT RUST IN HIS EYE WHILE CHANGING OIL IN GEN SET.

LIFTING A 30 LB PIECE OF STEEL ONTO A PALLET AND FELT A POP IN UPPER LEFT ARM.

While stacking metal grating pinched finger between grating.

No particular incident, ee claimed his back hurt.

MOVING DEBRIS FROM UNDER CRUSHER - LOOSE STRAND OF A PIECE OF OLD CABLE IN DEBRIS PENETRATED GLOVE AND PUNCTURED RIGHT INDEX FINGER.

EE GOT AIRLINE DEICER IN HIS EYES HAD IRRITATION AND WAS GIVEN RX AT CARE PROVIDER TO ELIMINATE IRRITATION AND THEN RET'D TO WORK. EE WAS WORKING WITH ALL OF HIS PPE ON AT THE TIME OF ACCIDENT

Crane was running hot, employee took radiator cap off to check water level, it blew back causing burn to right arm.

Employee was carrying a piece of channel iron when he lost his footing and slipped causing lower back pain.

EMPLOYEE REACHED DOWN TO PICK UP A PIECE OF STEEL - FELT PAIN IN BACK. CONTRIBUTING FACTORS: IMPROPER LIFTING TECHNIQUE.

EE WAS DRIVING A COMPANY PICK UP WHEN IT OVERHEATED. THE EE STOPPED THE VECHICLE AND STARTED TO REMOVE THE RADIATOR CAP. THE EE THEN CLOSED THE CAP AND THEN REOPENED IT AND RECIEVED 2ND DEGREE BURNS ON HIS ARM BETWEEN HIS WRIST AND ELBOW ON HIS RIGHT ARM.

EMPLOYEE WAS SETTING A STEEL PLATE ON A HOPPER. ONE END OF THE PLATE SLIPPED OFF THE EDGE OF THE HOPPER CAUSING THE OTHER END TO FALL PINCHING THE RIGHT PINKY FINGER, RESULTING IN A LACERATION REQUIRING STITCHES.

DRAGLINE OPERATOR WAS FEEDING REPAIRED DRIVE CHAIN ONTO SPROCKET. THE CHAIN TURNED ON THE OPERATOR CAUSING LEFT THUMB TO BE CAUGHT BETWEEN CHAINAND AXLE.

CHAIN SPRINGS ON SPRING PORTA POWER SITTING ON WOOD BLOCK, WOOD BLOCK FAILED LETTING PORTA POWER SLIP, SCREEN DROPPED STRIKING HAND.

EMPLOYEE STEPPED OFF OF SERVICE TRUCK NOT USING CORRECT METHOD. (1) STEPPED OFF FORWARD EXTENDING LEFT SHOULDER (2) HAS TAKEN CORTISONE SHOT