Buscar en el registro

EE CLAIMS HE GOT HIS RIGHT KNUCKLE CAUGHT IN BETWEEN A HEAVY BAR AND SOME ANGLE IRON. HE WAS TRYING TO CLEAN OUT THE CHUTE FROM #4 BELT TO THE #5 BELT.

EE ALLEGES WHILE HE WAS PRYING BEARING CAP WITH TRACK BAR AND BAR SLIPPED AND FELL DOWN ON FLOOR AND HIT HIM ON LEG, ELBOW, BACK AND UPPER & LOWER THIGH. THE REASON THIS IS SO LATE IN BEING RE PORTED IS THAT EE WAS ABLE TO DO HIS REGULAR JOB UNTIL HIS RESTRICTIONS WERE CHANGED ON 1/13/04.

TWO EMPLOYEES WERE PRYING OUT DRIVE BEARING OFF OF #3 KILN INCLINE SCREW. THE BAR SLIPPED AND ONE EMPLOYEE PULLED A MUSCLE IN BACK.

EE WAS ALLEGEDLY CHECKING THE HEAD PULLY/PUMP DRAFT LINE ON #1 RAW MILL WITH A HAMMER IN DOING SO, HE ALLEGEDLY CUT HIS LEFT FOREARM ON A PIECEOF INSULATING SHEET METAL.THE LACERATION REQUIRE D SUTURES.

EE ALLEGES HE WAS SCRAPING THE WINDOWS ON THE LOCOMOTIVE WITH A RETRACTABLE RAZOR SCRAPER. HE LOST THE SINGLE EDGE BLADE THAT GOES IN THE SCRAPER. HE ALLEGES HE BEGAN LOOKING FOR THE RAZOR ON THE FLOOR AND COULD NOT FIND IT. HE WAS THEN CALLED TO MOVE THE LOCOMOTIVE. HE ALLEGES THAT WHEN HE SQUEEZED THE HAND BRAKE HE FELT A PAIN ON HIS LEFT HAND THE RAZOR CAME OUT THRU THE TOP OF T

EE ALLEDGES THAT HE AND THREE OTHER REPAIRMEN WERE CHANGING THE SOUTH CRANE DRIVE WHEEL. THEY WERE REMOVING THE TOP WALKWAY PLATE AND THE WRENCH HE WAS HOLDING SLIPPED AND HE HIT HIS ELBOW ON THE CRANE.

EMPLOYEE ALLEGES HE WAS PULLING ON CHAIN HOIST, WHILE PULLING #1 KILN HOOD IN PLACE. ANOTHER WORKER WAS HOLDING A HEAD ROLLER AND LET IT SLIP AS EMPLOYEE WAS PULLING ON THE CHAIN. EMPLOYEE SAY S HE GAVE A STRONG PULL WITHOUT RESISTANCE AND INJURED HIS BACK.

EE INJURED SHOULDER WHILE SWINGING SLEDGE HAMMER& HANDLING HEAVY METAL. THIS IS AN OLD INJURY FROM 5/10/01 THAT HE AGGRAVATED.

BUMPED RIGHT ELBOW AND CAUSED OLECRANON BURSITIS DUE TO REPETITIVE HAMMERING.

EE WAS JACKING UP RAW MILL AND STRAINED HIS RIGHT SHOULDER.

EMPLOYEE IS A REPAIRMAN. WHILE REMOVING HEAD LINERS FROM RAW MILL, A COLD CHISEL BOUNCED BACK AFTER BEING STRUCK AND HIT EMPLOYEE IN FOREHEAD. EMPLOYEE WAS TAKEN TO HOSPITAL , TREATED/RELEASED HAD SEVERAL STITCHES AND RETURNED TO WORK ON THESAME DAY.

EE WAS WORKING IN THE MACHINE SHOP HE HIT HIS LEFT INDEX FINGER WITH A HAMMER

WORKING WITH WRENCH AND IT SLIPPED MASHING FINGER AGAINST METAL PIPE.

EE WAS SWINGING A SLEDGE HAMMER IN THE 222 FLOP GATE AREA AND HE HIT HIS FINGER RIGHT LITTLE FINGER ON A PIECE OF STEEL CAUSING A FRACTURE. SPLINT APPLIED AND HE RETURNED TO WORK NO LOST TIME.

WHILE WORKING HIT ELBOW ON BRACKET. A KNOT FORMED ON ELBOW AND REMAINED FOR 2 WEEKS AND DID NOT GO DOWN, TOOK TO DR ON 4-28-99 TO DRAIN FLUID ON ELBOW.

EMPLOYEE WAS USING A PORTAPOWER ON THE GYP BIN. WHEN PRESSURE WAS RELEASED ON THE PORTAPOWER THEBAR FELL ONTO EMPLOYEE'S LEFT FOOT. STEEL TOE BOOTS WERE IN USE, BUT THE PIECE HIT RIGHT BEHIND THE STELL TOE..

PULLING A BEARING OFF A SHAFT AND BEARING BROKE LOOSE AND HIT EMPLOYEE.

EMPLOYEE STATES WHILE USING A HAMMER, HE STRUCK HIMSELF IN THE TESTICLES. ON 01/28/99, INJURY WAS DIAGNOSED AS A HERNIA.

EE STATED WHILE DRIVING PICKS IN #10 CLINKER FEEDER, HE FELT SOMETHING IN HIS EYE. SAW DR ON 9-19-98 (PRESCRIPTION DRUGS) NO LTA.

USING COME-A-LONG TO LOWER DOOR ON SCREEN PLANT. RUBBER GRIP CAME OFF HANDLE AND THE HANDLE KICKED BACK AND CUT HAND - LEFT HAND.

INJRED STATES HE WAS WORKING ON 1 RAW MILL GIRTH GEAR TRYING TO DRIVE OUT BOLTS WITH A SLEDGEHAMNMER AND HURT HIS BACK.

WHILE USING PIPE WRENCHES TO FREE A JAMMED FEEDER, ONE SLIPPED AND PINCHED HIS FINGER. STITCHES WERE REQUIRED TO CLOSE THE WOUND.

EE STATES WHILE CLEANING OUT PRIMARY CRUSHER A ROCK FELL ON HIS ARM

EE WAS USING A CHOKER CABLE TO LIFT A 35 LB. EMPTY BARREL. THE BARREL SLIPPED FROM THE CABLE AND LANDED ON HIS LEFT FOOT.

EE STATES WHILE USING A HAMMER HE HIT HIS HAND.

EE STATES WHILE USING A BAR TO PUSH MATERIAL DOWN A CHUTE THE BAR SLIPPED & CAUGHT HIS THUMB BETWEEN THE BAR & FRAME OF THE CHUTE.

TRYING TO REMOVE BOLT FROM REED GUN--HIT THE CR ESCENT WRENCH WITH HAMMER, IT BOUNCED OFF BOWL HITTING FINGER.

WHILE REPLACING A WORN LINER PLATE ON A-25 ROCK CHUTE, EMPLOYEE SUSTAINED A SMALL PIECE OF METAL IN THE RIGHT EYE. WAS SEEN BY PHYSICIAN ON JANUARY 31, 1998.

EE WAS USING A SLEDGEHAMMER TO UNPLUG #1 RAW MILL CHUTE. SLEDGEHAMMER HANDLE WAS CRACKED LEAVING A SHARP FIBERGLASS SPINTER EXPOSED. THE SPLINTER LODGED IN HIS RIGHT HAND. DR. WAS UNABLE TOREM OVE ALL OF SPLINTER. FURTHER SURGERY MAY BE REQUIRED IN THE FUTURE.

EE WAS REMOVING OLD CHUTE FROM #1 COAL FEEDO WEIGHT SCREW. THE HOIST HE WAS USING SLIPPED CAUSING THE METAL CHUTE TO HIT HIS LOWER LEFT LEG. INJURY REQUIRED SUTURES. EE WAS GIVEN ANTIBIOTIC S

MILL DEPT UTILITY MAN WAS CLOSING A SLIDE GATE ON HOPPER FEEDER. WHILE USING PIPE WRENCH ON GEARED SHAFT, THE WRENCH SLIPPED OFF AND CAUGHG FINGER BETWEEN WRENCH HANDLE AND SIDE SKIRTING. CAUS ED LACERATION AND CONTUSION. REQUIRED STITCHES.

EE STATES WHILE USING A BAR TO CLEAN OUT #1 CLINKER BY PASS CHUTE A SLIVER OF STEEL BECAME EMBEDDED IN HIS ARM. THE SLIVER HAD TO BE REMOVED BY A PHYSICIAN.

EE WAS CLEANING OUT OVERLOADED BUCKET ELEVATOR USED 3/4 TON LIFTING DEVICE TO RAISE BUCKET TO ACCESS BOTTOM OF ELEVATOR. WHEN ENOUGH MATERIAL WAS REMOVED, ELEVATOR ROLLED BACK. HOOK OF LIFTI NG DEVICE WAS PULLED OUT AND STRUCK EE IN LEFT EYE. EYE WAS SO SEVERLY DAMAGED IT HAD TO BE REMOVED

EE STRAINED RIGHT ARM/SHOULDER WHEN THE HAMMER BEING USED MISSED TARGET (CHISEL). BEGAN PHYSICAL TREATMENT (THERAPY) ON 5/6/97

WHILE EE WAS USING A JACK TO LIFT UP A LARGE GEAR REDUCER, EE CAUGHT LEFT INDEX FINGER UNDER THE LOAD WHEN LETTING IT DOWN. THE WEEIGHT OF THE GEAR REDUCER SMASHED FINGER & WAS TREATED AT HOSPITAL.

EE WAS CLEANING BUILDUP IN THE CRUSHER AND A MUD BALL FELL FROM THE TOP SECTION AND STRUCK HIM ON THE NECK. HE WAS WEARING A HARD HAT, BUT THE IMPACT CAUSED HIM NECK PAIN. HE DID NOT MISS ANY WORK AS A RESULT OF THIS INCIDENT.

USING A SOCKET ALLEN WRENCH TO TIGHTEN LINER PLATE BOLTS. THE ALLEN WRENCH SNAPPED AND FINGER SCRAPED AGAINST THE LINER.

EMP WAS GETTING READY TO INSTALL NEW BELT ON #23 BELT LINE AND CUT THE METAL BAND ON BELTING ROLL. IT SNAPPED BACK AND CUT HIM ON RIGHT FOREARM REQUIRING SUTURES. RETURNED TO WORK AFTER MEDICA L TREATMENT WAS RENDERED.

EE ALLEGES WHILE TIGHTENING BOLTS ON THE PRIMARYCRUSHER WITH A WRENCH/PIPE EXTENSION HE HURT HIS BACK

EE WAS WORKING ON THE PRIMARY CRUSHER. HE WAS PRYING ON A LOWER GRATE WITH A 1 1/2" X 10' BAR. THE LOWER GRATE MOVED UP CAUSING THE BAR TO HANG IN WORN ARCH OF LOWER GRATE. THE OPPOSITE END OF BAR CAME DOWN PINNING EE S LEFT LEG.

EE WAS USING A BAR TO CHANGE FROM ONE SILO TO ANOTHER WHEN THE BAR SLIPPED AND MASHED HIS LEFT MIDDLE FINGER. AT THE TIME OF TREATMENT THIS WAS CLASSIFIED AS A FIRST AID. BUT LATER THE EE WAS GIVEN A PAIN MEDICATION WHICH MADE IT A REPORTABLE INJURY.

EMP ALLEGES WHILE CHIPPING BUILD UP OFF HANDRAILS WITH A HAMMER, PAIN IN HIS ARM BECAME PROGRESSIVELY MORE SEVERE. DID NOT REPORT INJURY FOR TWOWEEKS.

WORKING IN MILL. REPAIRING CRUSHER. WHILE USING A HAMMER, SWUNG HAMMER NAD HIT THUMB OF LEFT HAND.

EE ALLEGES WHILE POSITIONING THE DRUM CLAMP, HIS FINGER WAS CAUGHT BETWEEN THE DRUM AND CLAMP. WOUND REQUIRED STITCHES.

EE WAS TIGHTENING LINER BOLTS ON 5 FINISH MILL WITH 1 IMPACT. ROLL PIN SLIPPED OUT OF SOCKET, CATCHING GLOVE AND PALM OF RIGHT HAND.

USING POCKET KNIFE TO CUT TAPE BINDING A BUNDLE OF GREASE GUNS. KNIFE CONTINUED THROUGH THE TAPEAND CONTACTED THE RIGHT HAND.

WHILE AN ELECTRICIAN WAS DISCONNECTING A STARTER CUBICAL HE INADVERTALLY CONTACTED THE 440V BUS BAR WITH HIS WRENCH. THIS CONTACT CAUSED AN ARC WHICH BURNT HIS HAND. EE WAS TREATED FOR AN ELEC TRICAL BURN ON RIGHT HAND AT THE HOSPITAL AND RELEASED.

WHILE WORKING ON FORKLIFT, TIGHTENING BOLTS, WRENCH SLIPPED OFF NUT, CAUSING EMPLOYEE TO LOSE BALANCE AND HIT THE BACK OF HIS HEAD CAUSING A LACERATION WHICH REQUIRED STITCHES.

EE WAS OPENING A FIVE GALLON PLASTIC BUCKET LID WITH A POCKET KNIFE.THE KNIFE FOLDED CLOSED ON HIS RIGHT INDEX FINGER.

WORKING AT SURGE COMPLEX. CUTTING RUBBER FOR SPRING BAR. WHILE USING KNIFE TO CUT RUBBER, KNIFE SLIPPED AND CUT PALM OF RIGHT HAND.