Buscar en el registro

EMPLOYEE AND COWORKER WERE EMPTYING METAL BINS IN SHOP. COWORKER WAS USING A PRYBAR TO UNWEDGE BIN HANDLE WHEN IT SLIPPED AND STRUCK INJURED EMPLOYEE IN THE ARM.

INJURES EMPLOYEE WAS USING UTILITY KNIFE TO INSTALL POLY-DECK SECTIONS ON VIBRATING SCREEN AND CUT THE TOP OF LEFT HAND. HE WAS NOT WEARING GLOVES.

EMPLOYEE WAS TIGHTENING WEDGE BOLTS ON CONE CRUSHER #1 WHEN THE WEDGE FLEW UP STRIKING EMPLOYEE IN THE NOSE.

EE & COWORKERS WERE CHANGING THE BEARINGS ON A BLT CONVEYOR HEAD PULLEY. AS EE REMOVED THE FINALFEW BOLTS THE PULLY DROPPED DOWN & CAUGHT HIS FINGER BETWEEN THE PULLEY & THE BEARING HOUSING. T HE COMALONG WAS NOT PROPERLY POSITIONED TO SUPPORT THE WEIGHT OF THE PULLEY WHEN THE FINAL BOLTSWERE REMOVED

INJURED EMPLOYEE WAS REPOSITIONING SCREW JACK STABLIZERS ON THE PORTABLE CRUSHING PLANT. THE 4' BAR USED TO SCREW THE JACKS UPWARD SLIPPED OUT OF THE HOLE AND THE END OF THE BAR STRUCK THE RIG HT SIDE OF HIS HEAD. HE WAS WEARING HARD HAT PROTECTION.

EMPLOYEE WAS PREPARING TO SPLICE A RUBBER CONVEYOR BELT AND CUT HIMSELF WITH A KNIFE AS HE WAS TRIMMING THE BELT.

EE WAS CUTTING GASKET MATERIAL WITH A UTILITY KNIFE. THE KNIFE SLIPPED WHILE CUTTING TOWORDS HIMSELF.(INSTEAD OF AWAY FROM HIMSELF) CUTTING HIS RIGHT THIGH.

EMPLOYEE AND CO-WORKER HAD HOOKED A CHAIN ONTO A CHUTE BEING USED WITH A PROATABLE SCALPING SCREEN. AS THE INJURED EMPLOYEE WAS PULLING ON THE CHAIN TO MOVE THE CHUTE INTO POSITION, HE FELT DI SCOMFORT IN HIS LOWER BACK.

EMPLOYEE WAS HELPING TO REPAIR SWING CLUTCH ON DROPBALL CRANE. AS HE WAS USING PRYBAR TO ASSIST IN REMOVING BOLTS, IT SLIPPED AND STRUCK HIS FOREHEAD. EMPLOYEE WAS WEARING HARDHAT AND SAFETY G LASSES.

INJURED EMPLOYEE AND CO-WORKER WERE REPLACING SKIRTBOARD ON #21 BELY CONVEYOR. EMPLOYEE WAS USING UTILITY KNIFE TO CUT SLOTS INTO RUBBER KNIFE AND HIS FOREARM.

EE WAS HOLDING A PIN MAUL WHILE CO WORKER USED A SLEDGE HAMMER TO REMOVE A DRAGLINE BUCKET TOOTH WHEN A PIECE OF THE PIN MAUL CHIPPED OFF AND STRUCK EE IN FOREARM.

EE WAS TIGHTENING TENSION BOLT ON THE NUMBER 2D VIBRATING SCREEN. WHILE APPLYING PRESSURE ON THE HAND WRENCH, THE BOLT HEAD BROKE AND HIS THUMB WAS CAUGHT BETWEEN WRENCH AND MOTOR GUARD.

EE WAS USING KNIFE TO WHITTLE WOODEN HAMMER HANDLE.

WHILE WORKING ON TRUCK #2272 THE SCREWDRIVER I WAS USING SLIPPED CUTTING LEFT HAND. EMPLOYEE FEFUSED MEDICAL TREATMENT UNTIL THE MORNING OF 12-27-96. AFTER BEING SEEN BY PHYSICIAN ON 12-27 HE WAS TAKEN OFF WORK DUE TO SEVERE INFECTION OF LEFT HAND.

EE WAS HELPING ANOTHER EE ADJUST THE CRUSHER. WHILE REMOVING A BOLT IN THE ADJUST RING, THE BOLT GOT STUCK IN THE HOLE. EE TRIED TO PRY IT OUT WITH A CROWBAR AND THE BAR SLIPPED AND MASHED HIS FINGER AGAINST THE CRUSHER.

EE WAS HELPING TO INSTALL CONVEYOR BELT WHEN HIS HAND WAS CAUGHT BETWEEN THE CHAIN HOIST & RETURN IDLER.

EE WAS RESTING A RIECE OF RUBBER HOSE ON HIS LEG& CUTTING THE DAMAGED END WITH A RAZOR KNIFE. THE KNIFE WENT THROUGH THE RUBBER & CUT HIS LEG.

EE WAS PRYING WITH A STEEL BAR. THE BAR SLIPPED AND MASHED HIS FINGER BETWEEN THE BAR AND ANOTHER PIECE OF STEEL.

EE WAS TRYING TO PRY A ROCK LOOSE FROM A CHUTE AND FELT SOMETHING PULL IN HIS ARM

EMP WAS INSTALLING A SIZING SCREEN WHEN WRENCH SLIPPED AND HIT EMP IN THE CHEST.

WHILE EE WAS USING A HAMMER TO STRIKE THE SCREEN HIS SMALL FINGER OF RIGHT HAND STRUCK AGAINST A CROSS MEMEBER.

EE WAS TIGHTENING A BOLT ON THE PRIMARY CRUSHER WHEN HE FELT A PAIN IN HIS BACK.

EMPLOYEE WAS USING A CROWBAR TO OPEN RAILCAR DOOR WHEN THE CROWBAR SLIPPED FROM THE DOOR LATCH STRIKING EMPLOYEES JAW. (RIGHT SIDE).

EMPLOYEE WAS USING KNIFE TO CUT PLASTIC TIES TAHT SECURED THE STRAP ON HIS WELDING GOGGLES TO HIS HARDHAT. HE CUT HIS THUMB.

WHILE REMOVING A STEEL BUSHING (STRIKING IT WITH A SLEDGE HAMMER) WHEN A SMALL PIECE OF METAL CAME OFF THE HEAD OF SLEDGE HAMMER AND BECAME EMBEDED IN THE LEFT FOREARM.

WORKING ON A 4 1/4 CRUSHER TRYING TO LOOSEN THE BOWL WITH A HYDRAULIC JACK. THE JACK BRAKE AND THE HEAD RETRACTED MASHING HIS FINGER BETWEEN THEBOWL AND THE JACK. HE NEEDED 3 STITCHES TO REPAI R THE CUT ON HIS THUMB.

EMPLOYEES WERE USING A CABLE HOIST & J HOOK TO REMOVE A ROCK THAT WAS BLOCKING THE OPENING TO THE JAW CRUSHER AS THEY HOISTED THE ROCK THE HOOK JUMPED UP & STRUCK THE EMPLOYEE ON THE HAND IT M ASHED HIS FINGER BETWEEN THE HOOK & THE GUARD RAIL CRUSHING THE BONE JUST ABOVE THE MIDDLE JOINT THE HOSPITAL REMOVED HIS FINGER ABOVE THE MIDDLE JOINT

DISASSEMBLING A 7FT CRUSHER HEWAS PUSHING ON HAMMER HEAD TO REMOVE A HEAD NUT & PULLED A MUSCLE IN HIS LEFT CALF

THE EMPLOYEE WAS CUTTING A PIECE OF CONVEYOR BLTING USING A UTILITY KNIFE WHEN HE CUT HIMSELF ON LEFT WRIST.

EMPLOYEE WAS USING SLEDGE HAMMER OT DRIVE WEDGE FOR CONE CRUSHER ADJUSTMENT. HIS LEFT HAND SLIPPED OFF HAMMER AND WAS CAUGHT BETWEEN HANDLE AND WEDGE.

EMPLOYEE WAS HLEPING TO SPLICE CONVEYOR BELT, DURIN POSITIONING OF BELT AND CLAMP IT SHIFTED AND PINNED LEFT KNEE AGAINST CONVEYOR FRAME.

HIT HIS HAND WITH A HAMMER WHILE DRIVING A PIN OUT OF A DIPPER TOOTH. HE WAS WEARING GLOVES, BROKEN LEFT THUMB.

EE WAS CUTTING A PIECE OF CONVEYOR BELT ON Y-15 PRIMING CURSHER--KNIFE SLIPPED CUT RIGHT LEG.

EE WA USING APIPE, FOR LEVERAGE, TO LOOSEN CHAIN HOIST THAT WAS IN A BIND. THE PIPE SLIPPED AND HE WAS STRUCK ON THE CHIN.

EMPLOYEEW AS TIGHTENINGA BOLT ON A SHAKER SCREEN. THE WRENCH HE WAS USING SLIPPED AND HE HIT HIS ELBOW ON THE SIDE OF THE SCREEN.

EMPLOYEE WAS CUTTING A PIECE OF RUBBER BY PULLING THE KNIFE TOWARDS HIM. THE KNIFE SLIPPED AND HE CUT HIS KNEE REQUIRING 11 STITCHES.

EE WAS HELPING TO TIGHTEN BEARING BOLTS ON THE JAW CRUSHER FEEDER. THE FEEDER MOTOR WAS JACKED TO ONE SIDE ON PIVOT USING A CHAIN HOIST AND RUBBER DRIVE BELT THE DRIVE BELT BROKE AND THE MOTOR FELL ON EE ARM WHILE HE WAS USING A WRENCH TO TIGHTEN BOLTS.

EMPLOYEE WAS REMOVING BELT WIPER FROM #7 BELT CONVEYOR.THE BOLTS HAD BEEN REMOVED FROM ONE SIDE AND IT WAS RESTING ON CONVEYOR FRAME.HE WAS UNBOLTING THE OTHER SIDEIT DROPPED DOWN SUDDENLY AND CAUGHT HIS THUMB BETWEEN THE CONVEYOR AND WIPER.EMPLOYEE WAS WEARING WORK GLOVES.

UNPLUGGING SILO #20 AND HAND HIT STEEL GATE SEVERING TENDON ON LEFT HAND.

WORKING ON PLASTIC MACHINE, WHEN SCREW DRIVER SLIPPED CAUSING INJURY TO RIGHT HAND.

95465ING DUST COLLECTOR TUBES WITH PIPE WRENCH PAIN IN AGDOMEN

54736YE EWAS CHANGING DRAG CABLE ON UNIT 238 DRAGLINE CRANE. HE PLACED THE DEAD-END OF CABLE (1 1/8") INTO SOCKET AND WAS PREPARING TO DRIVE THE WEDGE INTO PLACE WITH HAMMER. THE END OF CABL 50314E OUT OF SOCKET AND STRUCK EMPLOYEE IN THE FACE. HE WAS WEARING INDUSTIRAL SAFETY GLASSES.

54736YEE ALLEGES THAT WHILE INSTALLING GEAR BOX COVER, HIS FINGER WAS PINCHED BETWEEN THE CHAINFALL HOOK AND THE GEAR BOX, MASHING HIS LEFT RING FINGER.

55061S REMOVING THE HITCH PIN ON AN ARTICULATING REAR DUMP HAUL TRUCK BY STRIKING A CHISEL WITH A MECHANICS HAMMER THE CHISEL FLEW BACK AND STRUCK EE ON THE LEFT SIDE OF NOSE.

EMPLOYEE WAS KNEELING ON TOP OF DRILL TRUCK CAB WHILE TIGHTENING A BOLT ON DRILL CAROUSEL. THE WRENCH SLIPPED OFF BOLT AND EMPLOYEE FELL BACKWARDS FROM THE CAB TO THE GROUND.

WHILE EMPL USING SHOVEL AROUND ROCK PLANT,SHOVEL HANDLE SPLIT AND JAMMED INTO EMPL LEFT HAND BETWEEN THUMB AND INDEX FINGER CAUSING DEEP PUNCTURE WOUND.

EMPLOYEE WAS ATTEMPTING TO FREE DUST BUILDUP TO GET IT TO FEED FROM TANK. MATERIAL BROKE LOOSE AND GOT INTO EMPLOYEE'S RIGHT EYE.

REPLACING COUNTER WEIGHT ON SHAFT HE HIT IT WITH A HAMMER TO STRAIGHTEN IT ON THE SHAFT & IT FELL OFF HE & ANOTHER EMPLOYEE TRIED TO CATCH IT BUT THE WEIGHT PULLED IT DOWN HE MASHED HIS FINGE R BETWEEN THE COUNTER WEIGHT & A GUARD SUPPORT BRACKET

EMPL HOLDING A LINE-UP PIN WITH LEFT HAND WHILE ANOTHER EMPL BUMPED IT INTO PLACE TO LINE UP LINKS BEING INSTALLED IN TRAVELING GRATE.G HAMMER MISSED PIN MASHING I.NAME LEFT MIDDLE FINGER.

EMPL PUNCHING CHUNKS FROM WASTE DUST TANK,STRUCK HAND AGAINST METAL ELEVATOR SHAFT.