Buscar en el registro

LIFTING MILL BALS BARREL WITH CRANE WHEN CABLESNAPPED OUT OF BARREL CUTTING HAND.

WHILE CUTTING A LARGE BOX OF METAL A SECTION OF IT CAME LOOSE CUTTING HIS LEFT KNEE

EE WAS USING CUTTING TORCH TO "WASH" AND REMOVE TRAMP IRON FROM CONE CRUSHER. A PORTION OF THE TRAMP IRON WAS EJECTED FROM THE CRUSHER AND STRUCK THE EE IN THE LEG.

PIECE OF METAL GOT INTO EMPLOYEE'S LEFT EYE. EMPLOYEE HAD BEEN WELDING ON A DRAGLINE BUCKET BUT FELT PAIN IN HIS LEFT EYE LATER THAT EVENING. EMPLOYEE DOESN'T KNOW HOW IT ENTERED EYE. STATES H E HAD HIS WELDING HOOD ON AT ALL TIMES.

EE AND CO WORKERS WERE REPLACING A TAKE UP PULLEY ON BELT CONVEYOR. AS THE CRANE WAS LIFTING PULLEY, EE S HAND WAS CAUGHT BETWEEN THE PULLEY AND CONVEYOR FRAME.

WHILE STANDING UNDER BALL MILL, LOOSE BALL WAS DROPPED BROM APPROX 30' STRIKING EMP ON RT SHOULDER. REQUESTED MEDICAL TREATMENT ON 6-30-97. INITIAL DIAGNOSIS WAS SPRAIN. WAS RELEASED FROM DR. EMP CONT. TO WORK BUT REQUESTED A SPECIALIST ON 8-21-97. EMP WSA ADVISED TO HAVE SURGERY FOR TORN ROTATOR CUFF.

EE WAS GRINDING IN TUB AND WITH SEVERAL OTHER GUYS, HE THINKS OBECT CAME IN BACK SDIE OF SAFETY SHIELD WAS NOT SURE HE HAD A INJURY UNTIL 11-10-96.

EE CUTTING FEEDER APART WITH TORCH. A LARGE PIECE OF HOT SLAG BURNT THRU HIS PANTS LEG AND FELL INTO HIS SHOE BURNING TOP OF RIGHT FOOT.

WHILE USING GAS TORCH TO CUT DRAG CONVEYOR COTTER PIN, THE SUDDEN MOVE OF THE TORCH CAUSED THE CONNECTOR TO LEAK, IGNITING GAS BURNING LEFT HAND.

EE WAS PLANNING A BOARD TO USE IN FLOOR OF LOCOMOTIVE. EE WAS HODLING BOARD WITH HIS LEFT HAND WHILE PUSHING BOARD WITH HIS RIGHT HAND USING PUSH STICK. THE GUIDE FENCE MOVED CAUSING FINGER TO COME IN CONTACT WITH BLADE

A ROCK FELL FROM A BIN HE WAS WELDING ON AND HIT HIM IN THE KNEE, BRUISING HIS KNEE.

EMPLOYEE WAS WALKING ALONG DECK OF PLANT WHEN A WIRE ROPE CABLE USED TO MOVE BARGES WITH A WINCH BROKE AND STRUCK HIM IN THE FACE.

EMPLOYEE WAS TIGHTENING HEAD ON CRUSHER. ANOTHER EMPLOYEE WAS OPERATING THE HYDRAULIC CONTROLS. AS THE JACK RETRACTED, THE EMPLOYEE'S FINGER WAS CAUGHT BETWEEN THE RAM HEAD & THE JACKS BODY. I T BROKE THE BONE IN HIS RIGHT FINGER IN 3 PLACES

EMPLOYEE WAS USING OXY ACETYLENE TORCH TO CUT AWAY A SECTION OF 3/4IN METAL PLATE FROM A 15FT X10FT SHEET IT WAS LAYING ON FORK LIFT BLADES & AS HE WAS FINISHING HIS CUT THE SECTION SWUNG DOWN & DROPPED ON HIS FOOT HE WAS WEARING STEEL TOEDBOOTS

EMPLOYEE WAS USING OXY ACETYLENCE TORCH TO REMOVE ROCK SCREEN & WAS BURNED BY HOT SLAG

EMPLOYEES WERE ATTEMPTING TO REMOVE AN INTAKE PIPE AND FOOTVALVE FROM A PUMP HOUSE.THEY WERE IN THE PROCESS OF CUTTING THE PLANGE LOOSE WHEN THE ELL(SUPPORTED BY A CRANE) BROKE ALLOWING THE PU MPHOUSE AND STRUCTURE TO TOPPLE INTO THE POND. THE EMPLOYEES WERE INSIDE THE PUMP HOUSE AT THE TIME AND DID NOT REALIZE THAT THE PIPE WAS SUPPORTING THE STRUCTURE.

EMPLOYEES WERE ATTEMPTING TO REMOVE AN INTAKE PIPE AND FOOT VALVE FROM A PUMP HOUSE.THEY WERE IN THE PROCESS OF CUTTING THE FLANGE LOOSE WHEN THE ELL(SUPPORTED BY A CRANE) BROKE ALLOWING THE P UMP HOUSE AND STRUCTURE TO TOPPLE INTO THE POND.THE EMPLOYEES WERE INSIDE THE PUMPHOUSE AT THE TIME AND DID NOT REALIZE THAT THE PIPE WAS SUPPORTING THE STRUCTURE.

EMPLOYEE WAS HELPING TO ADJUST CONE CRUSHER. AN ATTACHMENT USED TO HOIST CRUSHER W/ LIFT CRANE FELL ON HIS FOOT. THE DEVICE WAS STORED ON CRUSHER PLATFORM AND THE VIBRATION FROM ADJUSTING CRUS HER CAUSED IT TO TIP OVER.

INJURED WAS STANDING A IN FRONT END LOADER BUCKET HIS FOOT SLIPPED AND THE GRINDER HE WAS USING HIT HIS FOREARM HE RECEIVED SEVEN STITCHES.

EMPLOYEE WAS USING AIR LANCE TO CLEAN BEAMS WHEN HE GOT DUST INTO HIS LEFT EYE.

EMPLOYEE WAS USING A GRINDER TO CLEAN CEMENT COOLER WHEN GRINDER SLIPPED CAUSING HIM TO CUT HIS FINGER.

EMPLOYEE ALLEGES THAT WHILE HE WAS GRINDING A STEEL RING WITH THE DISC GRINDER, SMALL PIECE OF METAL FLEW INTO HIS LEFT EYE.

54736YEE WAS HELPING MECHANIC INSTALL THE PLANETARY GEAR ASSEMBLY ONTO THE LEFT DRIVE WHEEL ON 630 CAT HAUL WAGON. THE PLANETARY WAS SUSPENDED BY A TRUCK BOOM AND SECURED WITH A SHACKLE AND BO 33?03HE THREADS FAILED ON THE TAPPED HOLE AND THE BOLT PULLED FREE, DROPPING THE PLANETARY (WT 800 LBS) TO THE GROUND AND STRIKING EMPLOYEE'S FOOT.

WHILE EE WAS CUTTING A HOLE WITH AN ACETELINE TORCH, A PIECE OF HOT SLAG FLEW INTO HIS LEFT EAR, CAUSING RUPTURE IN EAR. EE DID NOT SEEK MEDICAL TREATMENT UNTIL 6-1-92, DUE TO NO PAIN BEING FE LT BY EE. EE RECEIVED 1 ST TREATMENT FROM EISHENOWER IMMED CARE THEN REFERRED TO EAR NOSE THROAT SPECIALIST.

EMPLOYEE WAS REPLACING GRAVEL SHIELD(METAL PLATE) ON #28 CONVEYOR BELT FEED HOPPER.A LIFT CRANE WAS ATTACHED TO PLATE AND SECURING IT INTO POSITION.A SECTION (1/2) OF THE PLATE HAD ALREADY BEE N WELDED TO HOPPER AND THE REMAINDER (1/20 WAS BING REMOVED WITH CUTTING TORCH SO IT COULD BE STRAIGHTENED BEFORE BEING WELDED INTO PLACE.AS THAT SECTION WAS CUT FREE IT SHIFTED SEVERAL FEET

EE WAS HOLDING BOTTOM OF OIL LINE ALREADY CUT LOOSE EE WAS CUTTING TOP LOOSE APPROX 10FT ABOVE EE WHEN EE CUT PIPE LOOSE CUTTER SLIPPED HITTING EE ON ARM CUTTING EE RT LITTLE FINGER & MIDDLE F INGER

EMPLOYEE WAS WELDING ON SAND SCREW AND FELL FROM BROKEN BEAM TO BARGE DECK.

INJURED WAS GRINDING A WELD BED ON A TRUCK DUMP BED HE WAS HOLDING THE GRINDER ABOVE HIS HEAD WHEN HIS LEFT HAND SLIPPED OFF OF THE HANDLE & CAME IN CONTACT WITH THE GRINDING WHEEL

VACUUM HOSE ON SUPER SUCKER WAS PUSHED INTO A PILE OF MATERIAL,CAUSING IT TO SURGE AND JERK EMPLOYEES NECK AND BACK.DID NOT SEE PHYSICIAN UNTIL 02-18-92.

EMPLOYEE WAS CUTTING RUSTED METAL WITH OXYGEN/ACETYLENE TORCH WHEN SLAG FLEW INTO EMPLOYEE'S EYE.

INJURED EE WAS PUTTING CRATER GREASE ON OPEN FACE BULL GEAR. HIS CALKING GUN TUBE OF CRATER BURSTED OUT ON THE SIDE AND HE TRIED TO RUB AS MUCH OF THE CRATER ON THE GEARS INTEAD OF REPLACING W ITH ANOTHER TUBE OF CRATER GREASE. THIS ACTION CAUSED HIS HAND TO BE CAUGHT IN THE GEARS WHEN THE HANDLE OF CALKING GUN HUNG ONTO EITHER HIS GLOVES OR BUTTONED SHIRT SLEEVE. HIS RIGHT HAND IN

CHIPPING HOT SLAG FROM STEEL PLATE WITH CH IPPING HAMMER WHEN PIECE OF SLAG HIT CHEEK & BOUNCED INTO LEFT EYE

EE WAS WELDING INSIDE VIBRATOR SCREEN WHILE THE VIBRATOR SHAFT DRIVE WAS BEING LIFTED TOWARD THE DRIVE SHAFT TUBE WITH LIFT CRANE. THE SHAFT CAME LOOSE FROM THE RIGGING AND FELL STRIKING THE V IBRATOR AND OR STRUCTURE SEVERAL TIMES BEFORE STRIKING EE.

ACCIDENT VICTIM WAS SPLICING 36IN CONVEYOR BELT BELT WAS BEING PREPARED FOR VULCANIZING ELECTRIC WINCH WAS ATTACHED TO BELT TO STRIP RUBBER COVER FROM BELT CHAINS ATTACHED TO BELT BLOCK SLIPPE D UP ROLLER SUPPORT SLIDING ROLLER OUT OF SUPPORRELEASING BLOCK 4INX4IN WOOD & PINNING VICTIMS LEG BETWEEN BLOCK & SUPPORT

WORKING AROUND JAW CRUSHER AT GROUND LEVEL LARGE ROCK FELL FROM THE FEED BIN AND STRUCK ON HEAD

EE WAS CUTTING AN ELECTRICAL CONDUIT WITH A GRINDER AND THE GRINDING WHEEL BUG INTO THE PIPE THROWING THE GRINDER VIOLENTLY AGAINST EE S LEFT LEG INSIDE OF KNEE JOINT.

NO NARRATIVE: (C5-C6 HERNIATION- NECK- WELDING)

EMPL WAS REMOVING ROCKS OFF WALKWAY BEHIND VIBRATING SCREEN WHEN ROCK BOUNCED OFF SCREEN BEHIND TRANSFER CHUT & FELL ON HAND

EMPLOYEE ALLEGES WHILE USING A JACKHAMMER TO CLEAN ROOF,HE FELT SOMETHING PULL IN HIS BACK.

EMPLS WERE WORKING ON C9 CONVEYOR EMPL WAS CUTTING COVER ITH BLOW TORCH & ACCIDENTALLY BURNED EMPLS RIGHT LEG.

HH WAS IN BED OF 33-07 FUMP TRUCK ATTACHING CABLES 20 CRANE COULD LIFT HEAD OF CRUSHER OUT OF TRUCK BODY. CRANE WAS BOOMING OVER TO PICK UP CRUSHER HEAD. THE SINGLE LINE WITH THE WEIGHT ON CRA NE DOWN HITTING BLOCK AND HITTING HIM ON LEFT SHHOULDER.

EMPLOYEE WAS ADJUSTING THE LIMIT SWITCH BLOCKA T #1 RAW MILL TIRPLE GATE CABINET WHEN THE HYDRAULIC ARM MOVED AND PINCHED HIS FINGER.

EMPLOYEE WAS USING THE OXY/ACETYLENE TORCH WHEN A PICE OF HOT SLAG POPPED UP AND STRUCK HIM AT THE CORNER OF HIS LEFT EYE.

EMPLOYEE WAS INSTALLING DRIVE PINS IN DRIVE CHUCK. THE DRIVE CHUCK WAS APPERNETLYSTUCK ON THE KELLY BAR AND WAS NOT FULLY SEATED INT THE TURNTABLE. WHILE INSTALLING THE RETAINER BOLTS, THE D RIVE CHUCK FELL CATCHING HIS RIGHT PINKY FINGER.

WELDING IN CHUTE AT FINISH PLANT PC HOT SLAG BURNED ELBOW THEN LATER BUMPED RT ELBOW WHILE CHANGING BEARING ON CONVEYOR AT TAIL PULLEY. 2 DAYS LATER ARM SOLE UP DUE TO INFECTION INTERNAL OUTSI DE SKIN HAD HEALED UP.

EMPLOYEE WAS CHECKING THE RECYCLE DUST F-K PUMP WHEN MATERIAL FELL INTO HIS FACE.DOCTOR VISIT ON 02-19-90 PRESCRIPTION MEDICINE.

EMPL WAS CUTTING WITH TORCH & AS HE WENT TO GET CHIPPING HAMMER TO CLEAN HE BURNED HIMSELF ON RIGHT WRIST WITH TORCH.

WHILE MOVING A BUNDLE OF "H" ANGLE WITH 5 TON OVERHEAD CRANE, OPERATOR LOWERED BUNDLE AND REACHED TO MOVE WOODEN BLOCK AND FINGER BECAME PINCHED BETWEEN STEEL ANGLES AND WOODEN BLOCK.

INJURED WAS SHARPENING DRILL BIT WITH GRINDING ROCK GRINDING ROCK SHATTERED KNOCKING SHIELD OFF GRINDER. SHIELD FLEW UP & STRUCK EMPL ABOVE LEFT EYE.

EMPLOYEE WAS HOLDING A PORTABLE GRINDER OVERHEAD TO GRIND ON THE SIDE OF A CHUTE. THE GRINDER KICKED AND SLIPPED, STRIKING HIS LEFT ARM.