Buscar en el registro

Employee was unloading belt structure and pulled a muscle in their back.

While changing battery on green ram car at #1 Battery Shack the charging lead had a splice in it and when taking the cathead (plug) out of the battery receptacle the employee said ee was shocked on the right forearm. The employee was taken to the hospital and checked out and received a return to work full release paper.

The employee pinched EE's right ring finger while operating the supply tractor

Employee went to pull cable bolt on ground to put into roof. Cable bolt was hung on a pile of coal and when ee snatched it hard ee felt a pop in left shoulder.

Employee was bolting in #5 entry at Spad # 17+60 and as employee was walking back to pull up the bolter, ee hung the right foot under a rock lying on the bottom, tripping ee causing ee to fall twisting ankle as ee fell to the ground. Employee finished the shift and didn't go to the Doctor until that afternoon.

The employee smashed left pinky finger between a steering jack and the mine roof. The finger was fractured and employee received 10 sutures.

EE hand was on the side of piece of equipment. A rock fell from the top breaking right ring finger and also received 4 stitches

A rock fell out the roof striking employee's right forearm, resulting a laceration were employee received eight stitches.

The employee was pushing a roof bolt up in the hole with the bolter and a 1' wrench and had the tip of a finger between the head of the bolt and the wrench pinching the finger.

EE was building an intake brattice, when EE felt EE's shoulder pop.

The right side pinner was moving from #7 to #8 entry. The Ram Car was setting idle with the pump motor on waiting for the other car to come out of #9 entry. Employee was moving cable out of the way for the pinner to pull into face of #8. EE was standing behind ram car when the car released brake causing ee to rollback striking employee in back of knee.

While loading a car employee stepped on a mound of coal and twisted their left knee.

Employee was operating a Diesel Scoop about 30' from the top of the slope. The scoop died and rolled down the entire slope and hit a concrete wall at the bottom. The employee had a bump on head and was complaining of back pain. Employee was taken to hospital seen and released. This accident did not become a lost time until 11/28/17 when Doctor took employee off work.

Employee was straitening bolt back to install in roof when they felt a strain in the left shoulder and elbow.

Employee was in the process of removing an impeller when the ratchet the employee was using slipped mashing finger causing a laceration requiring three stitches

Employee was working on oil leaks on feeder, tightening up loose fittings when the channel locks slipped causing employee to lose balance and footing twisting left knee.

Employee was taking a loop of cable off the miner and felt pain in back

Employee was helping hang the miner cable in #8 entry when EE felt something pop in the right shoulder.

Employee was cutting #6 entry when a rock measuring 12" wide X 30" long X 1/4" to 1.5" thick broke from the top striking employee on the head and left shoulder area. Employee said neck and shoulders were hurting so after injuries were assessed employee was taken outside and transported to hospitals.

Employee was cleaning outside widows on unit #107 777F Cat end dump, lost their footing causing them to pivot around while holding the handrail striking the handrail with their left rib area.

The employee was cutting a piece of belt when the knife slipped and cut employee's leg causing employee to get 3 sutures

Employee bent over to pick a miner bit and felt pain in lower back

It had been raining that morning and haul road was wet and slick. The grader had not graded that section of haul road prior to the accident. As EE went around curve, the truck started to slide in the mud. Truck slid causing it to overturn.

EE went to move the 4 man diesel, pulled it up about 8-10 ft. to get it out of the way. EE said that a piece of rock fell and hit them in the head and left shoulder. This happened between 2:30 and 3:30am and they continued to work until around 4:oo when they were transported outside. Also MSHA was called,because the ambulance EMT called life-flight. EE was sent to St. Vincent.

The employee was pulling down a curtain that was hard to take down, when it came down, EE injured left shoulder, also causing pain in the neck, left arm and hand.

EE was taking the miner back to the face of #4 entry. Pulled cable up in the face, pinched self between the tail of the miner and the rib.

On 08/31/2017 employee was operating an end loader and ran over a rock jarring their lower back. Employee continued to work and on 10/25/2017 they went to the Doctor for treatment.

EE was removing block from a scoop bucket and went to walk away from the scoop and slipped off of wet and muddy cable and fell down. EE's left foot stayed stuck in the mud, when EE fell and twisted left knee.

The employee was bending two roof bolts at the same time, and strained their shoulder.

The employee was driving a scoop down the #7 supply when a rock fell from the top hitting them on the left leg.

There was an Anomaly in the strata

Employee was lifting the lid of a ramcar battery when it slipped out of right hand smashing ring finger and middle finger on left hand.

The employee was lapping up old belt, when the belt lapper that the employee was using slipped off of the belt hitting employee in the groin

Driver went into a curve and turned tractor/trailer over. Driver says does not know what happened.

Employee was pulling bolter cable and felt a dull pain in lower right back.

EE climbed up on ladder of Komatsu 785 Haul Truck to inspect and secure a block heater receptacle that was broke off. When climbing back down off of the truck EE strained lower back. EE finished the shift and did not report injury till 1:00 pm on 7/25/2017.

Employee was on knees bolting, when ee twisted and felt left knee pop.

Employee was replacing grizzley flume screen when their hand slipped catching their right forearm on the rib on the grizzley causing a puncture to forearm. They received stitches and returned back work.

HAD A ROCK FALL OUTBY # 1 UNIT IN # 9 ENTRY AT 9+00 TO 9+50 IN PILLAR LINE. Roof Fall was about 18' wide x 20' long x6.5 high

Employee was using a belt knife and accidently cut their left leg causing a laceration resulting in them getting stitches.

Had a rock fall in the 3rd. South Panel at 8+50 in the intersection. The fall was 19' wide x 19' long x 9' high.

Road was wet. Driver said that EE looked down and when EE looked back up EE was at the edge of the road and ran up on the side of the safety berm, which knocked the wheel back into fuel tank. Driver sustained cut on head from hitting light and bruised ribs.

Employee was repairing doors at a rock dust hole when a beam turned over and caught their right little finger, mashing and broke it. This resulted in five stitches to employee's right little finger.

The employee was walking to employee's locker to put employee's boots on and slipped in water that was tracked from the shower.

Employee went to stand up and turn and twisted employee's left knee.

Employee was kneeling down and was cribbing under the continuous miner when a rock fell, hitting EE in the top of head and slid down EE's right shoulder.

While closing mandoor, employee's right middle finger was caught between the door and door frame, pinching, resulting in sutures.

Employee was pulling drill steel out of roof, when they felt a pain in their back and twisted their knee. Employee did not miss work until 05/08/2017.

Employee was driving a scoop and ran over a rock, jamming employee head into the canopy of the scoop injuring neck.

The employee strained employee's back while replacing the ripper shank guard on a D-11 dozer.