Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee was using a utility knife to cut nylon straps holding roof bolts. Knife jumped while cutting a strap and cut EE's left leg above the shin bone. Employee received sutures to close the wound.
Employee grinding iron while wearing welding hood and safety glasses. Spark struck ground, rebounded under hood and glasses, and entered left eye. Evaluated by physician: shallow metallic foreign body in left cornea. Topical anesthetic applied; foreign body removed without tissue removal. No pain or residual issues reported.
Employee opening Kiln 2 firing hood door to rake ash. Upon releasing handle, dust entered behind safety glasses and into right eye. Employee rinsed at eyewash station, later sought clinic care and was prescribed eye ointment. Required additional PPE for task was not worn. Employee returned same day, no restrictions; retraining conducted 2/10/26.
Employee got some dust in their eye while standing outside. Was not performing any work at the time. Had all proper PPE on.
Employee went to put a flame in kiln 1, EE was standing on a 29" rolling ladder, there was pulverized coal dust still in the hood of the kiln, when they introduced a flare to ignite the coal, the kiln produced a blowback, knocked the employee to the ground from the 29" ladder and they sustained burn injuries to right arm and lower back, 2nd degree burns.
An employee was hooking up a drum basket to a forklift, EE bent down to lift and slide the right-side fork to align with the basket, when EE lifted the fork, EE felt like an impact to EE's lower back. EE was taken to the Tooele Utah hospital where EE was diagnosed with lower back muscle sprain. EE received 2 injections for pain and inflammation.
Reported to management that EE was experiencing serious pain in EE's chest and believed it was from inhaling lime dust at Cricket Mountain. EE denied wearing mask or respirator, which was advised, when questioned. Sent EE to be seen at WorkMed, they diagnosed EE with exposure to chemical inhalation and referred EE to a pulmonologist. On 10/20/2025, EE was placed on modified duty
Miner was putting guard back on conveyor and pinched their finger. They were seen at medical facility and received four stitches to the top of their left index finger.
Employee was troubleshooting the MODCO Pod in product handling area when an air pulse blew lime dust into left eye. EE rinsed EE's eyes multiple times during the day and after shift change sought medical attention where EE was prescribed eye drops.
An operator in a skid steer with an enclosed cab could not get the bucket lowered. To get the bucket lowered another employee was standing on the bucket and jumping on it. While jumping on the bucket EE felt a pop in EE's left achilles.
Operator was pushing trees with 700H Dozer and a tree got stuck on a stump and swung around and shattered glass on the window. The glass shattered and a small piece got caught in EE's contact. The operator was given a tetanus shot and a prescription antibiotic. Returned to work immediately following medical treatment.
Employee had a lid come free and had lime hit EE in the face, causing lime in the eye injury.
Driver fell from the top of their trailer.
Employee was exiting EE's car to start EE's shift and step on a rock in the parking lot and rolled EE's ankle, resulting in a sprained ankle.
An operator was driving a haul truck down a heading when the haul truck started to slide on a downhill grade. The truck slid for roughly three headings then overturned in the travel way. The operator was wearing a seat belt and removed from the cab. EE was diagnosed with a hairline fracture on EE's left clavicle
While IE was holding a bracket to be tack welded a piece of slag fell into boot causing a partial thickness burn to the right foot
Lime in eye during clean up.
Employee was assisting shoveling a pile - EE fell into the pile and got lime in eyes. EE went to local medical center to get eyes flushed. Treating physician prescribed EE eye drops.
EE had just finished loading trailer with the loader. As EE was preparing to leave there was a swarm of around 40 bats overhead and one flew directly for EE's face. EE swatted at the bat to keep it from hitting EE's face. Afterward EE noticed that EE's hand was scratched. The doc advised a full rabies vaccination series.
The injured miner was replacing dead batteries on the repeater in the quarry. EE jarred EE's right shoulder and felt pain. EE went to physical therapy and was eventually recommended surgery to repair a torn rotator cuff. The surgery occurred on 10/16/25 making this an MSHA reportable injury.
Employee got dust in their eye, scratched an eye and sought medical attention. Went to the eye doctor and was diagnosed with a conjunctival abrasion. There was nothing in the eye but was prescribed antibiotic eye drops.
Shoveling piles of lime into hopper and strained a chest muscle.
An employee was observing a drag chain conveyor. EE's left hand was holding a drill with chisel attachment, the chisel slipped, and EE's finger contacted the corner casing of the elevator that carries coal to the conveyor. The emergency department classified this injury as a laceration/open fracture to EE's left-hand ring finger, requiring surgery to close the wound.
While manually assisting a forklift to place a sawhorse, the north end of the sawhorse fell and struck the top of the effected employees right foot resulting in a laceration and fracture.
At 05:14 the Graymont kiln crew noticed a Quarry Services truck was on fire. 911 call was made at 05:16. The MSHA hotline was called at 05:24. At 06:05 after the fire diminished a loader dumped limestone fines on the truck which extinguished most of it. The Fire Dept. responded at 06:10 and put out what fire remained. The fire resulted in a total loss of the shuttle truck.
Miner conducting a work area inspection. Miner looked up at approaching pickup headlights and slipped on a patch of ice. X-ray taken 12/12/2024 no fractures and released to full duty. MRI referral was made on January 1/24/2025. 1/27/2025 rotator cuff tear was diagnosed. On 2/3/2025 referred to Orthopedic specialist for surgery.
Our driver was attempting to unhook hoses from the tractor to the trailer so they could disconnect the tractor from the trailer. Their foot got tangled with the step on the back deck of truck. Although they were holding on to the safety bar, they slipped and fell. They bruised their left side.
Our loader was at the Carbis rack at the mine's surface location attempting to open the lid on a pneumatic tank trailer. When they pulled on our latch, they struggled with getting the latch to move. They pulled too hard causing a strain to their groin area. This caused a hernia to their groin area. They will need to have surgery.
Employee was pulling out a pump, when pulling EE caught EE's right-hand pinky finger between the pump and the pipe flange.
Employee was removing a sprocket on #3 aerator. The sprocket was heavier than the employee thought and dropped it onto the guard which was on the employee's right foot. The employee also smashed their right thumb between the sprocket and the guard. The employee's right thumb was fractured.
Product loader was on back of trailer when trucker started moving forward. Steps hooked on truck hatch pulling steps under catwalk and employees legs became entangled. Broken right ankle, broken big toe, and lost index toe on right foot.
A maintenance employee conducted repairs inside Aerator #3. During repairs, the employee received burns from steam and lime.
Employee was welding a patch on the enhanced hydrate blow down line. EE stated EE got something in EE's right eye, and thought it was slag from chipping EE's weld. EE washed out EE's eyes and used eye drops on site before going to a local medical center. At the med center the doctor used a Q-tip to remove a spec from EE's eye and prescribed EE eye drops for a scratch on EE's cornea
Hydraulic hose broke and sprayed oil in the face of the employee causing a burn or contusion on the cheek.
Employee was getting onto the forklift when they felt a pull in left hip/groin area.
Employee was holding onto railcar gate opener "rail wrench", while it was closing the railcar gate. The "rail wrench" vibrates when closes the lids, during this they felt a pop in their left bicep.
The oil for the Girth Gear caught fire. Employees slowed the Kiln down and got the fire out. The Girth Gear is encased in steel. Once the fire was out employees removed the guarding and cleaned it out.
A rack of scaffold equipment was being hoisted with a forklift. The rack bumped into the scaffold structure and started to fall off the forks. The worker attempted to push the rack back onto the forks when the rack tipped forward. The worker pinched the tip of middle finger between the rack and a hand rail. Worker received one suture an antibiotic and pain meds.
The injured miner was swinging a 10 pound sledge hammer to attempt to unplug a lime kiln dust (LKD) bin and chute. While swinging the hammer they felt a pop and pain in right shoulder/arm. They visited an orthopedist who released them to restricted duty. An MRI is scheduled for 12/15/2023 to determine the extent of the injury.
Employee was replacing a take up on a conveyor belt when, while doing so EE slipped resulting in a loss of balance and EE's arm impacted a guard adjacent to the belt. Went to doctor and was released to full duty that day. Followed up with doctor and fluid containing blood was drained from hematoma. Received doctors' notes on 12/4/23.
Employee slipped on lime putty and landed on EE's right shoulder.
Employee was loading shots for the quarry at the south ridge area, while walking on a down slope slipped on loose dirt and rocks and fell on EE's right side, felt a pop on EE's right shoulder.
Employee was closing the lids on top of a railcar when they tripped and fell forward. The employee was wearing their fall arrest and using a retractable lanyard. When they fell their arm was caught by the lanyard, resulting in a shoulder separation. Employee had surgery on 11/14/2023. Worked until then.
Employee was moving railcars and was very hot due to the high temperatures outside (90 F+). EE realized EE stopped sweating, which EE recognized as a sign of potential heat stroke and told EE's coworker EE needed to get out of the sun. Coworker helped get EE inside to air-conditioned break room. EE was taken to Medical Center via ambulance where EE received multiple IV's.
Employee was bent over picking up a drive chain guard for installation when EE felt EE's back strain.
Employee walking across the yard when EE's right knee gave way.
Buckets on a loadout spout were stuck. Trying to break free the material, the employee banged on the buckets from the inside with a sledgehammer. This resulted in the loadout spout becoming unstuck, and it swung forward and hit the employee in the face, knocking out the bottom half of their two front teeth. EE will have crowns put on. No restrictions and did not miss work.
Employee was cleaning out the cab of the haul truck and slammed a thumb in the door while closing the cab door.
Employee had just got done fueling the bolter when they heard crumbles hitting their hard hat, they then went to exit the area when a rock fell an estimated 22 feet from roof of the mine hitting their arm. Was taken by ambulance to hospital where x-rays were taken and revealed a broken left forearm.
Employee was unplugging core product from the core chute, when product dislodged lime went into EE's left eye.