Buscar en el registro

REPLACING PLOW IN MILL, UPON PICKING UP THE PLOW, HE SKINNED THE INSIDE OF THE LAST TWO FINGERS ON THE RIGHT HAND, ON PLOW TIP.

EE WAS THREADING CABLE THRU LIFTING EYE ON LOADER ARM WHILE IT WAS SUSPENDED BY HELPER WITH PRY BAR LOADER ARM SLIPPED FROM PRY BAR AND CAUGHT EE S HAND BENEATH, DISMEMBERING FIRST JOINT FROM RIGHT HAND INDEX FINGER.

EE WAS REPAIRING CATTLE GUARD ON MILL CREEK ROAD INVOVING WELDING GRINDING AND CHIPS. WEATHER CONDITIONS WERE VERY WINDY AT SOME POINT A METAL SLIVER BECAME EMBEDDED IN EE S RIGHT EYE IT BECAM E IRRITATED OVERNIGHT, MEDICAL ATTENTION DETERMINED THE CAUSED AND EE HAD SLIVER REMOVED FROM EYE BY OPTHOMOLOGIST ON 4-7-94. NO PERMANENT DAMAGE NOTED.

EE WAS LOOSENING NUT ON RETURN ROLLER OF CONVEYOR BELT WHEN CRESENT WRENCH SLIPPED OFF OF NUT. EE STRUCK HIMSELF WITH THE WRENCH ON BRIDGE OF NOSE, LACERATING IT.

EPLOYEE WAS CUTTING SECTION SFROM 3" DIAMETER PIPE WHEN A 4' SECTION OF THE PIPE SWUNG DOWN OFF OF TRUCK BED, STRIKING HIM IN RIGHT KNEE AND PINNING HIS LEG AGAINST THE TRUCK.

EE WAS TRYING TO MOVE A BOXCAR INNER BULKHEAD DOOR, AS HE WAS PULLING ON THE DOOR HE APPARENTLY PULLED A MUSCLE IN HIS SHOULDER.

EE WAS ASSEMBLING A DIESEL ENGINE, SWUNG A SOFT HAMMER TO SET GEAR HOUSING ONTO ENGINE BLOCK. IMPACT OF HAMMER CAUSED HAND & ARM PAIN.

EE WAS LIFTING 55 BAGS OF CHEMICAL AND CAUSED A HERNIA.

EE WAS STEPPING UP ONTO TRACKS AND SLIPPED ON SNOW ON TRACKS. WHEN HE SLIPPED HE JARRED HIS NECK.

EMPLOYEE WAS ATTEMPTING TO TURN DIVERTER GATE BETWEEN TWO BELTS, FROZEN MATERIAL PREVENTED TRUNING. EMPLOYEE PULLED VERY HARD ON LEVER, FROZEN MATERAL LET GO SUDDENLY, CATCHING & IMPACTING HIS HAND (RIGHT THUMB) BETWEEN THE HANDLE & THE STOP. RIGHT THUMB WAS LACERATED & REQUIRED STICHES, DOCTOR INDICATES FRACTURE.

EE WAS REPLACING A BROKEN SACK OF PRODUCT THAT HAD BEEN LOADED ON A TRUCK TRAILER HE TRIPPED AND FELL FROM TRAILER, LANDING ON HIS RIGHT HAND, SPRAING HIS WRIST.

EE WAS USING A BAR TO LOOSEN MATERIAL IN JIG BED HE RAISED HIS HAND AND HIT A FLURESCENT LIGHT TUBE THE TUBE BROKE AND A PIECE OF GLASS BECAME EMBEDDED IN HIS HAND.

EMPLOYEE WAS CLIMBING LADDER ON LOADER TO GET IN THE LOADER, LOST HIS BALANCE & HIT HIS KNEE ON RUNG OF LADDER. HE RETURNED TO WORK OF 7/13/93. ON 10/1/93 HIS KNEE GAVE OUT AS HE WALKED ACROSS THE ROOM & HE IS AGAIN UNDER DOCTOR'S CARE AS A CONTINUATION OF THE ORIGINAL INJURY OF 7/7/93.

THE OPERATOR WAS WASHING THE WINDSHIELD ON A CAT 631 SCRAPER, WHEN THE DOOR SLAMMED ON HIS ARM. HIT LOWER LEFT ARM WAS PINCHED BETWEEN THE DOOR AND THE CAB.

EMPLOYEE WAS CUTTING METAL WITH CUTTING TORCH & METAL STARTED TO FALL WHEN HE REACHED FOR IT HIS HAND PASSED THRU THE FLAME OF THE TORCH IN HIS OTHER HAND

EMPLOYEE WAS CLIMBING LADDER ON LOADER TO GET IN THE LOADER, LOST HIS BALANACE AND HIT HIS KNEE ON RUNG OF LADDER.

THE TRAILER DECK HAD SNOW ON IT THE TRUCK DRIVER WAS HELPING ANOTHER DRIVER CLEAN OFF HIS TRAILER WHEN HE SLIPPED AND FELL FROM THE TRUCK, HE LANDED WITH HIS LEFT WRIST AND HAND CAUSING HIM TO FRACTURE HIS LEFT WRIST JOINT.

EMPLOYEE WAS STACKING BAGS ON A PALLET WITH BACK TO REJECTED PALLET. EMPLOYEE ON FORKLIFT WAS ATTEMPTING TO REMOVE REJECT PALLET WITH FORKLIFT & PUSHED IT INTO 1ST EMPLOYEES FOOT PINCHING HIS FOOT BETWEEN TWO PALLETS.

EMPLOYEE WAS STACKING 100 POUND BAGS ONTO PALLETS STACKED TWO HIGH. THE STACK OF PALLETS WAS TOO HIGH FOR HIM AND HE OVEREXTENDED, STRAINING HIS LOWER BACK.

EMPLOYEE WAS MOVING A TRUCK TIRE, IT STARTED TO FALL TOWARDS HIM,A ND WHILE TRYING TO PUSH TIRE AWAY FROM HIM IT CAUSED INJURY TI HIS RIGHT SHOULDER.

CLEANING DIVERTER PLATE WHICH DIRECTS ORE TO THE BELT TO 2 TANK USING A BAR TO CLEAN FROZEN MATERIAL BAR CONTACTED CONVEYOR BELT AND SLAMMED HIS HAND INTO THE DIVERTER GATE AND TORE HIS RIGHT THUMB NAIL OFF.

HAMMERING FROZEN MATERIAL & STRAINE LEFT HAND & FOREARM

EMPL TWISTED & BANGED KNEE WHEN THROWING 100# SACKS OF BENTONITE.

FEED WAS COMING DOWN THE CHUTE INTO MILL FEED BIN & WAS TRYING TO STICK & STOP UP & HE WAS HITTING IT WITH THE HAMMER AND ACCIDENTLY HIT HIS THUMB

EMPLOYEE WAS WORKING IN CHUTE HE SLIPPED AND SLID DOWN THE CHUTE CUTTING HIS SHIN.WEATHER WAS COLD AND THERE WAS ICE IN THE CHUTE.

EMPLOYEE PICKED UP A 2-LB COFFEE CAN HALF FILLED WITH BARITE TO MEASURE SOME OUT FOR A SAMPLE AND HEARD A POP IN HER LEFT SHOULDER.

APPARENTLY TORE ROTATOR CUFF WHILE OPERATING 631 SCRAPER

EMPLOYEE WAS LYING ON HIS BACK UNDER PAN FEEDER CLEANING OUT ROCKS.WHEN HE CRAWLED OUT TWO LUMPS APPEARED ON RIGHT ARM AND BACK WHERE HE HAD BEEN BITTEN BY AN INSECT.

EMPLOYEE WAS MOVING A RAFT WITH SUBMERSIBLE PUMP ON IT FROM THE BANK INTO THE WATER WAS PRYING RAFT WITH A BAR AND PULLED A MUSCLE IN HIS BACK.

ATTEMPTING TO CLEAN PULLEYS ON CRUDE ORE LONG BELT LEADING TO STORAGE TANKS, WHEN HE WAS PULLED INTO A PINCH POINT USING BROKEN HANDLE HOE TO SCRAPE THE PULLEY, SYSTEM HAD NOT BEEN DE-ENGERG IZED OR LOCKED OUT AND WAS STILL IN OPERATION

EMPLOYEE REACHED INTO PACKER TO PICK UP BAGS HE HAD DROPPED, WHEN PACKER CAUGHT HIKM AND PINCHED HIM BETWEEN PACKER AND WALL.

HE WAS OPERATING BAGGING MACHINE. HE TRIED TO RAISE THE POWER DISCHARGE BAG CHAIN. HE HAD BEEN INSTRUCTED NOT TO MAKE ANY ADJUSTMENTS, TO STOP MACHINE AND GO GET A MAINTENANCE MAN TO MAKE REPA IR.

EMPLOYEE WAS COUNTING AND SORTING RIPPERS GUARDS. ONE WAS FROZEN TO THE GROUND. WHEN EMPLOYEE PULLED TO BREAK IT LOOSE, HE INJURED HIS BACK.

GREASING TRUCK IT SLIPPED HIT IN MOUTH

LIFTING IRON STRAINED BACK

EMPLOYEE WAS LOADING 100# BAGS ONTO A WOODEN PALLET. AS THE BAGS CAME OFF THE CONVEYOR BELT, HE REACHED FOR ONE AND STRAINED HIS LEFT SHOULDER.

OPERATOR WAS LOOKING BACK TO CHECK ON ROCK PICKER HE WAS PULLING AND THE FRONT WHEELS OF TRACTOR FELL INTO A DITCH THROWING OPERATOR AROUND CAB CAUSING INJURY.

EE WAS DRILLING A HOLE ON UNDERSIDE OF 980B LOADER TO INSTALL NEW BACKUP ALARM. HE WAS PUTTING AS MUCH PRESSURE AS HE COULD ON THE BIT. WHEN THE DRILL BROKE THRU THE BIT LOCKED AND THE DRILL S PUN. THE SIDE HANDLE ON THE DRILL STRUCK HIS FACE, SPLITTING HIS LIP.

EMPLOYEE WAS STRUCK IN THE BACK BY ANOTHER EMPLOYEE.

THE ROTARY DRYER SHUT DOWN DUE TO A POWER FAILURE. UPON RESTARTING, THE OPERATOR DID NOT FOLLOW PROPER PROCEDURES. THE RESULT WAS A FLASHBACK IGNITION WITH THE OPERATOR IN AN UNSAFE POSITION N EAR THE INSPECTION PORTS OF THE IGNITION CHAMBER. THE OPERATOR RECEIVED 1ST DEGREE BURNS ON THE FACE AND 2ND ON THE FOREARM.

WALKING UP THE TRACKS TO SWITCH TRACKS AND SLIPPED IN WET MUD.

A CHAIN FLEW BACK AS INSTALLING TRACK ON D9H DOZER. CHAIN STRUCK EMPLOYEE IN RIGHT ARM, DOWN RIGHT SIDE OF BACK AND LOWER CALF OF LEG.

EMPLOYEE WAS MOVING ELECTRICAL CONTROLLER FROM MILL AREA TO SHOP FOR REPAIRS AND INJURED BACK LIFTING CONTROLLER.

EMPL TWISTED RIGHT ANKLE AS HE STEPPED FROM EQUIPMENT.

WHILE SWEEPING FLOOR FORKLIFT OPERATOR MADE A SHARP TURN AND RAN OVER RIGHT FOOT CAUSING DAMAGE TO RIGHT FOOT.

EMPLOYEE WAS STACKING 100 # BAGSOF BENTONITE ON PALLETS, AND SUFFERED ABDOMINAL PAIN.

WHILE HNADLING 100# SXS OF BARITE THE EMPLOYEE STRAINED A MUSCLE IN HIS LOWER BACK.

EMPLOYEE STEPPED OFF SCRAPER AND TWISTED BACK.

EMPLOYEE WAS STACKING BAGS ON A PALLET WHEN HE DEVELOPED SORENESS TO THE RIGHT SHOULDER.

WHILE HOOKING UP 4" RUBBER HOSE TO 4" METAL PIPE EMPLOYEE STRUCK LEFT ELBOW ON 4" METAL PIPE CAUSING CONTUSION TO LEFT ELBOW.