Mount Hope Quarry: 1 muerte registrada Metal/Non-Metal

Miner was determined to be over the 25 decibel threshold during hearing test. Sending back for retesting

Miner was determined to be over the 25 decibel threshold during hearing test.

While trying to disconnect fill line on the back of the water truck employee smashed left index finger causing a cut on the top of the finger.

Changing starter rod; 6" drill hammer fell over striking miner in right foot above toe protection

Miner was driving haul truck, when miner started feeling discomfort on their lower back

Hearing standard threshold shift at 10 dbs or more.

When exiting bathroom, associate stepped on a rock and rolled right ankle. The employee saw an ortho on 6/7/2023 and was signed out of work when an x-ray revealed a broken bone in EE's leg.

There was a fire at the scale house that was not extinguished within 30 minutes of knowledge. Ignition source currently unknown, no injuries.

Installing metal pipe. Metallic debris blew into eyes.

While flipping a cutting edge over on the forks of a forklift the mechanic felt a pop in EE's left elbow.

Grinder bit struck arm/wrist.

Employee felt a pain in their shoulder when lifting an 18 lb. piece of steel into a dumpster. MRI revealed no tear but employee was put on light duty.

While grinding on sand screw during maintenance, employee felt a sudden pain in their back. Employee was seen by contractor physical therapist who urged them to go to the ER. The employee was diagnosed with a back strain and given a prescription painkiller and muscle relaxer.

Employee hit their head/hard hat on an I-beam in the plant when standing up. Due to the stiffness and pain not going away, EE saw a doctor who gave EE a prescription for a muscle relaxer. No light duty or other restrictions were given.

Bungy cord dislogded striking employee.

Employee was walking from the car to the time clock to start shift on Thursday morning when EE collapsed. Nearby employees heard EE fall and began CPR, called EMS, went for the nearest AED machine, and sent employees to escort EMS personnel to EE when they arrived. EE passed away the following Tuesday night (8/11).

while assembling lock post cylinder, right pinky finger became pinched between sleeve and outer ring of lock post cylinder. 8 stitches for laceration

While leaning foot on warehouse chain, associate went to lean elbow on wall, chain hooks broke, associate fell approximately 3'. Associate sustained abrasion to back of head and laceration to left elbow requiring 3 stitches.

While cutting an electrical cord/wire with a utility knife (razor end), employee slipped and made contact with left hand creating a 1" laceration on the palm side under pinky finger.

While employee was fitting a vertical wear plate on the wall of the rear re-crush feeder box assembly, the upper corner of the wear plate became lodged on one side. As the employee tried to free the stuck plate and while doing so the plate dislodged and crushed finger.

strained back while operating loader

There was no specific accident/incident. Reporting a hearing threshold change that meets MSHA's requirements to report from annual hearing test results. When his baseline testing is compared to current testing meets the reportable criteria for MSHA. Re-test completed on 9/2/14 confirm same results. Employee claims wax build-up possible infection: to follow up with ear doctor.

Employee went to reach for lunch box in back of pick up truck (driver side); when he went to lean back he lost conscious and fell backwards. 2nd employee heard fall, found employee unconscious with laceration to the back of his head due to fall. The loss of consciousness was due to personal medical reasons, staples were received to laceration from the fall

While attempting to loosen a turnbuckle on a speed reducer, the associate strained his right shoulder. Proper tool and position were identified, however, due to the heat the conditions were warm which may have played a role.

INJURED LEFT THUMB WHILE SWAPPING OUT OXYGEN TANKS ON SERVICE TRUCK. THE PROTECTIVE CAGE OVER THE BOTTLES FELL TO A CLOSED POSITION WHILE HANDLING THE OXYGEN BOTTLE. THE CAGE FELL ONTO HIS LEFT THUMB CAUSING SWELLING AND BRUISING.

miner was attempting to loosen a turnbuckle and chose to use a bar and hammer for the task, upon striking the bar, hammer recoiled, hitting miner on the upper lip area causing a laceration of approx 1cm. Miner received 5 stitches.

While cutting rubber screen with razor knife, EE cut his thumb.

Lightening struck conveyor that employee where employee was working causing employee to receive electric shock.

Employee states was climbing down a ladder, when his foot slipped through rung causing him to fall. Under investigation

Employee was pulling fuel hose to fill pump in drop cut. While pulling hose it became stuck on a rock. Employee pulled hose and felt a pop in his arm.

Employee was operating walk behind under a conveyor. While grabbing a bucket of material, the control end lifted and pinched EE's finger against return idler guard.

While operating walk behind skid-steer, the machine was backed into a support beam, causing the operator's finger to be pinched in the controls.

Employee arrived at work not feeling well. As the afternoon progressed he began to feel worse. He was driven to the emergency room at local hospital.

Installing bolts in countershaft on standard. Forklift was holding piece into place, the fork tip slipped pinching thumb against bolt.

While installing a connector insulator to new welding cable, the employee's hand slipped, striking his other hand with screwdriver.

While employee was driving a bearing onto a shaft with a drift pin and 3 lb hammer, his finger was struck with the hammer.

While hosing down conveyors at the mill, the employee slipped on mud. Employee has lost time from work due to a surgical procedure on the knee effective 11/23/2004.

WHILE LOWERING AN IDLER TO THE CONVEYOR, THE IDLER STRUCK THE EE'S HAND.

WHILE TRYING TO REPOSITION BELT, HAND SLIPPED CAUSING IT TO GO THROUGH DRIVE SHEAVE.

WHILE CUTTING RIB RUBBAR WITH A RAZOR KNIFE (TOWARD HIMSELF) KNIFE SLIPPED STRIKING EE FINGER.

WHILE LIFTING FAN HE SLIPPED STRIKING LEFT FOOT.

WHILE CARVING OUT A NOTCH IN WOOD FOR A ROOF RAFTER, THE KNIFE SLIPPED FROM EE'S RT. HAND STRIKING THE LT. MIDDLE FINGER.

EE WAS USING A FORKLIFT TO TURN OVER A PLANETARYSO THAT HE COULD PLACE NEW GEARS INTO IT. WHILE MOVING PLANETARY ON FORKS, THE PLANETARY FELL INBETWEEN FORKS DROPPING ONTO EE'S RIGHT FOOT.

WHILE EE WAS MOVING A 20"X 12"X 2" PIECE OF PLANK FROM A RACK, THE EMPLOYEE THAT WAS HELPINGHIM SLIPPED CAUSING PLANK TO BOUNCE ON GROUND & STRIKE EE ON SIDE OF FACE.

EMPLOYEE'S RIGHT FOOT SLIPPED INTO A GAP NEAR MOTOR ON SCREEN CAUSING HIM TO STRAIN HIS LEFT KNEE.

WHILE CLEANING OUT FEEDER II WITH AIR GUN, THE AIR LINE GOT PULLED INTO THE HEAD SECTION OF #13BELT. EMPLOYEE COULD NOT RELEASE THE AIR LINE QUICKLY ENOUGH & HIS ARM WAS PULLED IN BETWEEN THE HEAD SECTION OF BELT.

WHILE STANDING BENEATH BELT CLEANING AND LOOSENING CONCRETE, PIECE OF CONCRETE FELL ONTO EMPLOYEE.

WHILE OEPRATING 80 TON HAUL TRUCK, TRUCK CAUGHT FIRE, EMPLOYEE LEAPT FROM TRUCK.

WHILE REMOVING BOOM STOP PIPE FROM DROP BALL, PIPE SLIPPED CAUSING LACERATION AND FRACTURE TO TIP OF EE FINGER.

WHILE TIGHTENING CAPS ON SPRAY PIPES, 2" PIPE WRENCH SLIPPED FROM HAND HITTING LEFT EYE BROW.

WHILE CLEANING THE DASHBOARD OF A TRUCK, EE DID NOT SEE A RAZOR BLADE ON THE DASHBOARD AND CUT HIS FINGER.

WHILE REMOVING A BELT CLAMP, AFTER SLICING A BELT, IT BECAME HUNG UP ON A IDLER. AS THE IDLER WAS BEING CUT OUT WITH A TORCH TO RELIEVE PRESSURE, BELT CLAMP FELL OFF, PINCHING THUMB AGAINST F RAME.

WHILE CLEANING THE WINDOW OF THE LOADER, SUPERVISOR CALLED TO EE HE LEANED FORWARD TO HEAR HIM AND SLIPPED OFF LOADER

WHILE LIFTING OUT SCREEN, FINGER GOT CAUGHT BETWEEN SCREEN & CRANE BODY

WE SET UP FOR BLAST SECURITY. WE SET AN EE AT THE OUTSIDE BLAST PERIMETE ABOUT 1500'. WHEN THE SHOT WENT OFF, ONE ROCK CAME OUT OF THE SHOT (32#). WHEN THE EE SAW THE ROCK, IT BOUNCED DOWN THE RAMP TOWARD HIM, WENT THROUGH THE PASSENGER SIDE WONDOW & STRUCK HIM IN THE LEG.

WHILE CUTTING A PLATE OF STEEL THE ACETYLENE HOSE HAD A PIN HOLE LEAK INTO GLOVE & SPARK WENT TO GLOVE & BURNED HIM.

WHILE RE-ROUTING A PIPE WORKER INSTRUCTED HELPER TO CUT ALL THE WRAPS WITH WIRE CUTTERS, WHILE THE EMPLOYEE CUT THE ONE INF RONT OF HIM WITH UTILITY KNIFE.

WHILE CLEANING OUT CRUSHER EMPLOYEE STRUCK ELBOW AGAINST/ SIDE OF CRUSHER.

WHILE CLEARING STONE FROM AROUND SCREEN A FOOTBALL SIZE ROCK FELL ON HAND.

WORKING ON SCREEN DECK, PRYING SCREEN OUT STRUCK FACE.

REMOVING CONCSVE PLATE FROM CRUSHER, DRIVE A WEDGE BEHIND PLATE & POP LOOSE & REMOVE WITH CRANE.

EMP CLIMBED UP ON A CONVEYOR TO TIGHTEN A NUT. EMP DID NOT WEAR A SAFETY BELT. SLIPPED AND FELL TO GROUND 8' BELOW. CRACKED 2 RIBS AND SPRAINED KNEE.

EE WAS CLIMBING ON A CONVEYOR AND SLIPPED AND CUT ANKLE ON FRAME OF CONVEYOR

EE WAS USING A PRY BAR TO PRY A SCREEN. THE BAR SLIPPED HIS RIGHT HAND STRUCK THE SCREEN CAUSING A LACERATION OF THE RT THUMB-REQUIRED SUTURES

EE WAS CUTTING 6" TUBES FOR DRILLED HOLES USING A UTILITY KNIFE. EE BRACED TUBE ON LEG AND CUT TOWARD HIMSELF. THE KNIFE SLIPPED AND STABBEN INTO KNEE

EMP WAS CLIMBING ON LATTICE FRAME CONVEYOR DURING INITIAL CONSTRUCTION PHASE. THERE WERE NO CAT WALKS INSTALLED ON THIS CONVEYOR AT THE TIME OF THE ACCIDENT. THE CAT WALK WAS COMPLETED SHORTLY AFTER THE INCIDENT. EMP HAD PREEXISTING KNEE PROBLEMS WHICH WAS EXACERBATED BY THE ACTIVITY.

EMPLOYEE WAS STANDING BY A PORTABLE CEMENT MIXERWHICH WAS BEING PICKED UP BY A FORKLIFT. THE MIXER WAS FROZEN TO THE GROUND AND IT BROKE FREE AND JUMPED AT THE WORKER HITTING HIM IN THE BODY A ND RIGHT FOOT.

WHILE DEBURRING, THE EMPLOYEE PULLED THE TOOL TOWARD HIS LEFT HAND. IT SLIPPED OFF OF THE WORK AND CUT THE PALM OF THE LEFT HAND BELOW THE THUMB

WORKER WAS MOVING DRUM OFF OF PALLET WHEN HE FELT PAIN INBACK. WORKER DID NOT USE DRUM HANDLING EQUIPMENT PROVIDED AT THIS LOCATION.

WHILE STEAM CLEANING A TRUCK, THE EE PASSED THE STEAM WAND OVER HIS RUBBER BOOTS. THERE WAS A SMALL PINHOLE IN THE BOOT WHICH ALLOWED THE PRESSURIZED STEAM TO ENTER AND CONTACT THE SKIN ON HIS FOOT.

EMPLOYEE TWISTED HIS BACK WHILE CLIMBING OUT OF A SCREEN DECK. EMPLOYEE DID NOT REPORT OR SEEK MEDICAL TREATMENT UNTIL 8-22-95.

EE WAS CUTTING BELTING WITH A RAZOR KNIFE TO OMAKE A SPLICE WHEN HE SLIPPED AND WITH HIS ARM. HE RECIEVED FIVE SITCHERS.

UNLOADING RUBBER BELTING FROM A FLATBED TRUCK EMPLOYEE NOTICED PAIN IN LEFT GROIN AREA

WHILE REMOVING A DRIVE SHAFT UNIVERSAL JOINT, EMPLOYEE WAS STRUCK IN LEFT ARM WITH A PIECE OF METAL WHICH BROKE OFF OF U-JOINT WHEN STRUCK WITH HAMMER.

PULLING STEEL OFF A SHELF, HIS FOOT HIT A PIECE OF STEEL. THE STEEL FELL OVER AND HIT HIS FOOT- FRACTURING HIS TOE THROUGH HIS SHOES.

WHILE LOADING PRIMARY SCREEN ONTO A FLATBED TRUCK A SCREEN SLIPPED & SKID OFF THE STACK MAKING CONTACT WITH THE TOP FRONT OF THE ANKLE

EMPLOYEE WAS STRIPPING THE CASING OFF FROMA PIECE OF WIRE WHEN HE SLIPPED W/THE KNIFE, CUTTI GHIS FINGER. THE WEATHER WAS VERY COLD CAUSING HTE CASING TO BE ANORMALLY HARD. EMPLOYEE RECEIVED 4 SUTURES, BUT RETURNED TO WORK AS AN ELECTTRICIAN.

EMPLOYEE WAS WALKING IN THE MILL WHEN HE TURNED HIS HEAD. THERE WAS A PIECE OF METAL STICKING OUT THAT HAD BEEN DISCARDED & WAS FROZEN TO THE TOP OF A CONVEYOR FOUNDATION. THE EMPLOYEE LACERAT ED HIS LIP ON THE METAL.

EE WAS CUTTING W/A BAR SAW. HE SET THE SAW SO THAT IT WAS NOT SUPPOSED TO MOVE. HE THEN REACHED OVER TO GRAB A PART WHEN THE SAW CONTINUED TO COME DOWN AND HIT HIS FINGER. IT IS A HORIZONTAL B AN SAW WHICH WAS FOUND TO HAVE DEFECTIVE HYDRAULICS.

EMPOYEE HIT HIS THUMB WITH A HAMMER CAUSING HIS SKIN TO SPLIT OPEN. HIS SKIN WAS VERY CALLOUSED AND DRY. HIS INJURY REQUIRED HIM TO HAVE STITCHES.

EE WAS CLEANING MUD FROM A TAIL SECTION ON A CONVEYOR. THE CONVEYOR HAD STOPPED DUE TO EXCESSIVE RAIN AND MUD ON BELT. WHILE EE WAS STANDING AT REAR OF CONV. MUD SLID DOWN THE BELT. THE MUD PI LED UP AROUND THE CALVES OF THE EE. EE THEN TWISTED HIS KNEE WHEN HE TURNED.

WHILE TIGHTENING A BOLT ON A 6" WATER LINE, WRENCH SLIPPED OFF AND EMPLOYEE STRUCK ELBOW ON PIPE.

EE BURNED HIS RIGHT PALM WHEN HE ACCIDENTALLY PUT HIS HAND DOWN ON A PIECE OF HOT METAL THAT HE HAD JUST PREVIOUSLY CUT WITH A CUTTING TORCH.

EMPLOYEE WAS ENTERING LOADER CAB WHEN HE LEFT A PULL IN HIS GROIN AREA.

EMPLOYEE STEPPED OFF FROM A WORK PLATFORM 6 FEET ABOVE THE GROUND ON A PORTABLE SCREENING PLANT. HAND RAILS WERE MISSING ON THE PLATFORM.

EMPLOYEE HAD JUST FINISHED A REPAIR ON A CONVEYOR. A FRONT END LOADER WAS BEING USED TO SUPPORT A SECTION OF THE CONVEYOR WHILE THE EMPLOYEE WELDED IT TO THE REST OF THE FLAME. THE EMPLOYEE WAS USING THE MAIN CONVEYOR SECTION AS A WORK PLATFORM (SEE ATTACHED).

EMPLOYEE SLIPPED ON ICE IN MILL AREA WHILE CLEANIN GUP AT THE END OF HIS SHIFT. WORK AREAS HAD BEEN SANDED HOWEVER THIS PARTICULAR AREA HAD NOT.

EE WAS GRINDING A DRILL BIT WHEN DEBRIVE FLEW INTO EE EYE. THE EE WAS WEARING SAFETY GLASSES AND FACE SHEILD. A PRESCRIPTION WAS GIVEN TO EE WHICH MADE IT REPORTABLE NO SCHEDULED WORK ON 12-24 -93.

EMPLOYEE SLIPPED ON THE ICE AND STRAINED HIS RIGHT KNEE.

EMPLOYEE WAS SHARPENING A BIT FOR THE DRILL RIG WHEN A PIECE OF RUST BECAME IMBEDDED IN HIS EYE. THE EMPLOYEE WAS WEARING SAFETY GLASSES AT THE TIME. NO FACE SHIELD. EMPLOYEE WAS GIVEN PRESCRI PTION EYE DROPS TO PREVENT INFECTION.

EMPLOYEE WAS USINGA PRESS TO PRESS A SHAFT OUT OF AN IMPELLER. WHEN THE PRESS SLIPPED CAUSIGN THE STAND TO KICK OUT AND HIT THE EMPLOYEE'S LEG.

EMPLOYEE STOCKPILES MATERIAL W/ ON 85 TON HAUL TRUCK. HE ROLLED DOWN HIS WINDOW IN HIS AIR CONDITIONED CAB FOR A REASON UNKNOWN TO HIMSELF AND GOT DUST IN HIS EYE. EMPLOYEE REPORTED THE INCI DENT HTE FOLLOWING DAY WHEN HIS EYE WAS INFLAMED AND SWOLLEN.

EMPLOYEE WAS MANUALLY MOVING THE FRAME WORK FOR THE TIRE ASSEMBLY ON A RADIAL STACKER.

EMPLOYEE SLIPPED WHILE WELDING ON A LOADER BUCKET. EMPLOYEE THEN FELT SOME PAIN IN HIS LOWER BACK.

WHILE LIFTING A BODY CABLE FOR A HAUL TRUCK EMPLOYEE STRAINED RIGHT ELBOW.

EMPLOYEE COMPLAINED OF BACK PAIN AFTER CARRYING A CONTAINER OF GREASE UP A SET OF STORIES. EMPLOYEE SHOULD HAVE USED A CRANE, WHICH WAS IN THE AREA.

EMPLOYEE CUT HIS LEFT KNEE WHILE ATTEMPTING TO CUT SOME CONVEYOR BELTING W/A RAZOR KNIFE

54736YEE SLIPPED AND BANGED HIS ELBOW WHILE REPAIRING A CRACK INSIDE A CONCRETE CATCH BASIN. EMPLOYEE IS ABLE TO PREFORM DUTIES AS NORMAL.

55061S IN THE PROCESS OF REPLACING A DAMAGED AIR HOSE LEAD ON AN AIR ARC WELDER WITH THE POWER ON HE REMOVED THE RUBBER INSULATOR WITH IT LAYING ACROSS HIS LAP HIS KEYS MADE CONTACT WITH THE L 51403OMPLETING THE CIRCUT THE EE BURNED HIS HAND

54736YEE SLIPPED W/A RAZOR KNIFE WHILE CUTTING CABLE ON A WIRE FEED WELDER CUTTING HIS PALM.

54736YEE STRAINED HIS BACK WHILE CLIMBING INTO A KID STEER LOADER.

EMPLOYEE FELT PAIN IN GROIN AREA WHILE LIFTING AN 8'X2"X4" PIECE OF LUMBER.DIAGNOSIS LOWER ABDOMINAL MUSCLE STRAIN EMPLOYEE LOST NO TIME UNTIL 07-07-92 AND ONLY STARTED LIGHT DUTY 06-26-92.

WHILE PULL STARTING AN AIR COMPRESSOR THE ROPE BROKE CAUSING CONTACT BETWEEN EMPLOYEES FINGER & A PIECE OF SHEET METAL EMPLOYEE CUT RT RING FINGER REQUIRING STITCHES EMPLOYEE IS STILL ABLE TO PREFORM HIS JOB W/O LIMITATION

EMPLOYEE BANGED HIS KNEE ON A METAL OBJECT LYING ON A CATWALK WHILE MAKING A REPORT ON A CONVEYOR EMPLOYEE RECEIVED STITCHES IN HIS LEFT KNEE EMPLOYEE IS THE PRIMARY CRUSHER OPERATOR SO NO RES TRICTED WORK ACTIVITY WAS NECESSARY

EMPLOYEE WAS WORKING ON A HYDRALIC FITTING AND FAILED TO TIE BACK THE HOSE. HE BUMPED THE HOSE CAUSING IT OT SWING AROUND STRIKING HIM IN THE MOUTH. EMPLOYEE RECEIVED A FAT LIP AND THE DOCTOR ENDED UP PULLING ONE OF HIS FRONT TEETH.

EMPLOYEE WAS HITTING A PC OF 6IN PRC W/SLEDGE HAMMER PVC SHAT TERED HITTING EMPLOYEE IN EYE EMPLOYEE WAS NOT WEARING SAFETY GLASSES AT THE TIME OF INCIDENT HOWEVER EMP IS NORMALLY NEVER SEEN W/O SAFETY GLASSES

EMPLOYEE TRIPPED ON A ROCK & FELL INJURING HIS FINER

EE TANGLED HIS FOOT IN A HOSE HE WAS USING WHILE DECENDING A LADDER THIS CAUSED EE TO LOSE HIS FOOTLING AND MISS THE BOTTOM RUNG OF THE LADDER.

WHILE OPERATING THE SKID STEER LOADER, EMPLOYEE DROVE UP ONTO A ROCK CAUSING MACHINE TO BUMP INTO A CONV. FRAME JARRING EMPLOYEE. EMPLOYEE COMPLAINED OF BACK PAIN AND WAS INSTRUCTED TO SEE A P HYSICIAN.

EMPLOYEE WAS BENDING OVER PICKING UP WELDING RODS WHEN HE COMPLAINED OF BACK PAIN.

EMPLOYEE IS NOT SURE WHAT HAPPENED.THERE WAS NO PARTICULAR INCIDENT THAT CAN BE ATTIRBUTED TO THE INJURY.EMPLOYEE WOKE UP WITH SORE RIBS.

HAUL TRUCK DRIVER ALLEGES BACK PAIN.REINJURED A PREVIOUS CONDITION THAT EMPLOYEE ACQUIRED WHILE LANDSCAPING AT HOME.THIS WAS EMPLOYEES FIRST DAY BACK FROM VACATION.EMPLOYEE WENT TO THE DOCTOR ON 08-28-91.

EMPLOYEE WAS REPLACING 5/32" WELDING ROD BACK INTO CONTAINER. NOT HAVING THE ROD INSERTED ALL THE WAY EMPLOYEE REPLACED CAP OF CONTAINER AND THEN SLAPPED IT CLOSED. THE ROD PENETRATED THE CAP AND PIERCED HIS LEFT #2 FINGER. THE PUNCHTURE BECAME INFECTED THE FOLLOWING DAY.

EMPLOYEE IS NOT SURE EXACTLY WHAT HAPPENED OR WHEN IT HAPPENED. HE WOKE UP ON 8-12-91 W/BACK PAIN AND SOUGHT MED ATTENTION.

EMPLOYEE WAS LIFTING A HEAVY OBJECT AND TWISTED AS HE WAS LIFTING. HE PULLED TWO MUSCLES IN HIS LOWER BACK. THIS REPORT IS BEING FILLED LATE DUE TO LACK OF INFORMATION GIVEN TO SAFETY DEPT. EM PLOYEE WENT TO A DOCTOR AUG.1. HE WAS AWAY FROM WORK 7/31 W/0 MEDICAL APPROVAL OR NOTIFICATION.

EMPLOYEE WAS STRUCK ON HAND WITH HAMMER WHILE REACHING FOR A WRENCH. EMPLOYEE RECIEVED SUTURES.

EMPLOYEE SLIPPED WHILE GETTING A PIECE OF STEEL OFF FROM RACKS ADN TWISTED HIS KNEE.

EMPLOYEE REQUEST MEDICAL ATTENTION FOR AN ALLEGED ACCIDENT ABOUT 4/12/91 @ 6:30PM THE EMPLOYEE CLAIMED HE BANGED HIS KNEE ON A SUPPORT WHILE ENTERING #3 SCALPING SCREEN. MEDICAL ATTENTION REVE ALED CONTUSION W/LT DUTY AND PERSCRIPTION.

EMPLOYEE, INSTEAD OF WALKING AROUND A PUDDLE OF WATER, GENERATED BY MELTING SNOW, SLIPPED ON ICE THAT WAS WATER COVERED IN THE MAINENANCE YARD (GARAGE) AND FELL ON LEFT SIDE.

EMPL DEVELOPED A RASH.THE RASH CAME IN CONTACT WITH GREASE & OIL FROM EMPL CLOTHES.THE RASH BECAME INFECTED DUE TO LACK OF PERSONAL CARE.

EMPLOYEE TORCH CUTTING ANGLE IRON. A 9" PIECE DROPPED OFF STRIKING FOOT JUST BEHIND STEEL TOE CAP OF WORK SHOES. AT TIME OF ACCIDENT EMPLOYEE DID NOT WANT MEDICAL ASSISTANCE. ON 12-5-90 HE SEE KED MEDICAL ATTENTION DUE TO CONTINUED PAIN IN FOOT.

IMPROPER FOOTWEAR

PINCHED WRIST BETWEEN BOBCAT & CONVEYOR STRUCTURE.

EMPL PICKED UP HOT PIECE OF STEEL WITHOUT WEARING GLOVES.

DIGGING ROCK OUT OF PRIMARY CRUSHER

EMPL WAS CUTTING CONVEYOR BELTING.

CHANGING BUCKET TEETH-REMOVING ROTAINING PINS-RETAINING PIN SHATTERED WITH A BLOW FROM HAMMER.NOTATION OCTOBER 30,1990-HOSPITALIZED FOR REMOVAL OF METAL-STANDARD FIRST AID RENDERED BY DOCTOR O N DATE OF ACCIDENT.

EMPLOYEE CUT HIS THUMB WITH A UTILITY KNIFE WHILE STRIPPING INSULATION OFF FROM AN ELECTRICAL CABLE.

LIFTING PIECE OF CRUSHER STEEL WITH CRANE PAD EYE FOR SLING BROKE OFF.CAUSING ONE SIDE TO DROP STRIKING EMPL.

ON SUNDAY 07/08/90 EMPLOYEE WOKE UPWITH A GROWTH ON RIGHT EYE.ON MONDAY 07/09/90 EMPLOYEE REQUESTED OF THE SUPERVISOR TIME TO GO TO THE DOCTOR.DOCTOR DID NOT KNOW WHAT THE GROWTH WAS.SAID MAYB E IT WAS FROM WORK.TO RECHECK EMPLOYEE IN A WEEKS TIME.POSSIBLE NOT WORK RELATED.

MOVING INVENTORY CUTTING EDGES FELT PAIN

OIL LEAK ON 50 TON CRANE RENTAL CAUSED EMPLOYEE TO SLIP AND FALL WHILE CHECKING ENGINE OIL.

CUTTING LINATEX MATERIAL WITH A UTILITY KNIFE BLADE BROKE CUTTING EE.

EMPLOYEE USED A 5 GAL PAIL AS A STEP, INSTED OF LADDER IN TRUCK PALL TURNED OVER AND EMPLOYEE FELL BACKWARD. NTOE: RETURNED TO WORK ON 3-8-90, STAYED ON JOB . EMPLOYEE ELECTED TO GO TO DOCTOR ON 3-9-90.

NAILING CONCRETE FORMS TO SHOE PLATE MISSED NAIL HIT FINGER.

REBUILDING GEAR BOX ON PRIMARY CRUSHER REMOVING TIMING WEIGHTS GEAR ROTATED A LITTLE.

EMPLOYEE WAS UNROLLING A SPOOL OF WIRE CABLE. FAILED TO WATCH END ON SPOOL WHICH WHIPPED OUT AND HIT EMPLOYEE ON FOREHEAD.

EMPLOYEE LOST BALANCE AND FELL FROM SHUTTLE CONVEYOR TO CRUSHER PLATFORM (9'4") AFTER GETTING RIGHT HAND CAUGHT IN LOOSE DRIVE BELTS ON #2 CRUSHER SHUTTLE. EMPLOYEE FAILED TO TURN OFF AND LOCK OUT.

3/8" X 1" BAR STOCK 20' LONG WAS PLACED ON METAL SAW HORSE. EMPLOYEE DRUG MATERIAL ACROSS SAW HORSE CAUSING IT TO FALL AND STRIKING EMPLOYEE.

MOVING LUMBER.

WHILE DISASSEMBLING SCAFFOLDS A CROWBAR WAS KICKED OFF & HIT EMPLOYEE BELOW

WHILE WALKING BY FRONT OFFICE TRIPPED OVER FOOT LACES

DISASSEMBLY OF SIMPSONS FORMS

WHILE ERECTING A NEW ASPHALT CYCLONE LYING ON BACK RUST FELL FROM OVERHEAD INTO EYE.(NO SAFETY GLASSES WERE BEING WORN) IN TOOL BOX

L FOOT SLIPPED OFF CLUTCH PEDAL DUE TO A DIRTY AND FILTHY CAB ATMOSPHER MATERIAL ARE AVAILABLE TO KEEP SAME CLEAN

EMPL MADE IT A PRACTICE OF NOT USING THE FULL LENGTH OF LADDERS TO EXIT EPUIPMENT WOULD JUMP FROM 2 OR 3RD STEP

EMPLOYEE WAS WELDING WITHOUT A WELDING HOOD.

EMPLOYEE WAS CLIMBING #4 SIZING SCREEN LADDER (CAGED). STATED HIS RIGHT KNEE GAVE OUT.

CHANGING #2 SCALPING SCREEN, TURNED ON LEFT FOOT POPPED KNEE.

WHILE ADJUSTING LIGHTS ON PORTABLE LIGHT PLANT FINGER WAS PINCHED BETWEEN STOPS ON TELESCOPING SECTION.

PRIMARY CRUSHER HOE OPERATOR WAS LOOKING THROUGH OPER DOOR OF MACHINE WHEN PIECE OF ROCK FLEW OUT OF PT.

AN OUTSIDE TRUCK DRIVER MIXED WORDS WITH LOADER OPERATOR DRIVER ;GRABBED OPERATOR BY NECK & THREW HIM AGAINST LOADER

NOT WEARING PROPER TYPE GLOVES WHEN BURNING WITH A TORCH.

WHILE PASSING UNDER BELT 2" PIECE OF STONE FELL AND HIT EMPL AT THE TIME FOREMAN WAS LED TO BELIEVE THAT THE REASON HE WAS OUT WAS DUE TO PREVIOUS INJURY AND FOREMAN MADE NO REPORT THEREFORE W E ARE TRYING AT THIS POINT TO STAY IN COMPLIENCE

WHILE CHECKING ANITFREEZE ON A EXTERIOR GENERATOR COOLING FAN EMPLOYEE SLIPPED.

WHILE FLUSHING OUT A CLASSIFIER EMPLOYEE RECEIVED A FOREIGN PARTICAL TO RIGHT EYE. CLAIMS HE WAS WEARING SAFETY GLASSES.

WHOILE EMPLOYEE WAS MOVING A GANG BOX HE STRAINED HIMSELF.

WHILE HOLDING A 3FTX3FTX1/4IN STEEL PLATE OVERHEAD EMPLOYEE ASSUMED TACK WELDS WERE SUFFICIENT TO HOLD LET GO WELDS BROKE & STRUCK EMPLOYEE ON HARD HAT PLATE FELL APPROX 2FT

EMPLOYEE WAS BENDING OVER, HARD HAT FELL OFF. TURED TO GET IT UP AND HIT HEAD ON TEREX TRUCK. HE WAS WORKING ON.

WHILE UNLOADING A FLAT BED TRUCK I NAME AND NAME NAME LOST HIS GRIP ON A STEEL I BEAM CAUSING IT TO DROP THERFORE PINCHING I NAME FINGER CAUSING SWELLING WITH A POSSIBLE FRACTURE

I NAME WAS MOVING A HYDROLIC PUMP WITH ANOTHER EMPL THE TOE HITCH SLIPPED OUT OF HIS HANDS AND THE PINCHED HIS FINGERS

THE EMPL WAS PULLING A CHAIN OUT FROM UNDER A PIECE OF STEEL WHEN HE HURT HIS BACK

I.NAME SLIPPED & FELL DOWN A SET OF STAIRS & TWISTED HIS ANKLE

A LOADER WAS DIGGING IN THE FACE WHEN HE STRUCK A MISFIRED HOLE AND CAUSED A SMALL EXPLOSION.

PICKUP TRUCK TIRE EXPLODED WHILE BEING FILLED WITH AIR EMPL WAS TAKING AIRLINE OFF WHEN TIRE EXPLODED. TIRE FLEW UPWARD STRIKING EMPL IN ARMS & HEAD.

THE OPERATOR TIPPED THE BOBCAT FORWARD, NOT ENOUGH TO TIP OVER BUT HE STUCK HIS FOOT OUT THE FRONT AND PINCHED IT BETWEEN THE BUCKET AND THE FRAME.

HE WAS LIFTING A CONCRETE FORM WHEN HE STRAINED HIS BACK.

I.NAME WAS THROWING A PIECE OF STEEL OUT OF THE BACK OF AN 85 TON TRUCK WHEN THE STEEL CAUGHT HIS GLOVE AND PULLED HIM OUT OF THE BACK OF THE TRUCK

THE INJURED SLIPPED ON A WET WALKWAY DURING S RAIN STORM.

HE GOT HIS FINGER CAUGHT IN THE LINKAGE FOR THE SWING.

EMPLOYEE STEPPE8 ONTO AN ADJACENT BELT TO THE ONE HE WAS WORKING ON. THE BELT WAS RUNNING AND THE EMPLOYEE FELL ONTO THE BELT. THE BELT HE WAS ACTUALLY WORKING ON WAS LOCKED OUT. ALL BELTS IN A WORKING AREA3WILL NOW BE LOCKED OUT.

HE WAS WATCHING3THE TRUCKS DUMP STONE INTO THE PRIMARY CRUSHER AND A ROCK CHIP FLEW INTO HIS EYE.

HE STEPPED OFF 7HE HOOD OF A TEREX ONTO THE FENDER; THE FENDER GAVE A LITTLE AND HIS BACK GAVE OUT.

HE WAS WELDING 5 PIECE OF ANGLE IRON WHEN THE ANGLE SLIPPED AND HIT HIM IN THE CHIN.

EMPLOYEE SLIPPE8 ON ROCKS WHILE ENTERING THE PRIMARY CRUSHER. HE LOST HIS BALANCE WHICH CAUSED HIM TO FALL AND HIT HIS HEAD.

WORKING IN SHOP2 LOST HIS BREATH.

GETTING DOWN FR2M WATER TRUCK. HE SLIPPED ON THE STEPS.

CLIMBING OFF FR2M A TEREX HE SLIPPED AND BRUISED HIS ARM ON THE BODY OF THE TRUCK.

EMPLOYEE WAS ON3A CONVEYOR BELT WHEN IT STARTED.

WORKING WITH ST9EL ANDHE PINCHED HIS FINGER.

CLIMBING THE LA8DER ON THE FUEL TRUCK WHEN HE STRAINED HIS LEG.

WORKING ON TRUC5, TRUCK STARTED TO ROLL, HE JUMPED FROM TRUCK AND FELL HITTING HISBACK ON A PIECE OF METAL ON THE GROUND.

WHILE REPLACING3A DRIVE BELT ON AN FMC FEEDER HE GOT HIS HAND CAUGHT BETWEEN THE SHIVE & THE BELT THE MOTOR DOES NOT ADJUST ENOUGH TO PUT THE BELT ON LOOSELY STITCHES WERE REQUIRED ON LEFT IND EX & MIDDLE FIN1ER