Portable Crusher No 1: 90 citaciones de la MSHA Metal/Non-Metal

Miner was pulling down safety guard on bob cat and caught EE's finger.

Miner was driving haul truck on 4/7/15 and claimed the haul road was bumpy causing strain to lower back and hamstrings. He did not go to the doctor but reported to work on 4/8/15 (the next day); working as the Feeder Operator as a protective measure. On 4/9/15 Miner went to his Chiropractor who placed him on Light Duty.

Employee slipped off excavator and landed on foot; was taken to the hospital where he was diagnosed with a broken bone in his foot.

Was installing a starter in a Haul Truck, lifted in awkward position

Employee was operator an Excavator when he told his Supervisor that he wasn't feeling good and needed to go to the Doctor. Employee was having stomach problems. Supervisor called for a ambulance because of employee's condition. Employee was transported to McMinnville Hospital. Company is waiting to hear what the problem his.

Tendonitis to right Forearm. Repetitive movement. Employee did not report it until 3-7-11 after he went to the Immediate Health Care Clinic.

EE had been working for a few hours when he went to his Supervisor and stated that he was feeling lite headed and he thought he had Vertigo again. He stated that he had someone coming to pick him up and take him home. We were informed later in the evening that the Doctors thought that he might have had a mild stroke and they were admitting him to the Hospital.

Climbing down a ladder and twisted his knee.

Twisted right ankle when walking around the plant. The rock under feet rolled out from under miner.

Employee was adjusting the chutes on the screen plant, pulling out of chutes; the slide came out and fell on his finger smashing it between the slide and pry bar.

Employee was installing V-belts in the scalper screen, using a digging bar for tension. The bar gave way and he fell to the ground injuring his knee.

WAS OPERATING LOADER, GOING FROM REVERSE TO 1ST GEAR FORWARD, WHEN HE FELT A PINCH IN LOWER BACK.

WALKING DOWN CRUSHER PAD, SLIPPED AND FELL PULLING MUSCLE IN RIGHT LEG.

CHANGING THE TIRE ON CONE CRUSHER, SMASHED FINGER BETWEEN RIM ON TIRE AND BRAKE DRUM.

AIR LINE BLEW OFF POWER GREASER HITTING ME IN THE NOSE.

TWISTED HIS WAIST TO GET A TOOL AND HAD A BACK SPASM.

LOWERING FILL TUBE ON VSI CRUSHER, OPENED DOOR AND SOMEONE BUMPED IT AND IT FELL ON LEFT FOOT.

INSTALLING AXLE PLATE ON 988B LOADER. SLIPPED AND DROPPED PLATE ON TOE.

AS A GROUP WE WERE MOVING PALLETS OF POWDER FROM TRAILER TO TRUCK. AS WE MOVED A PALLET I WAS RUNNING TH EPALLET OTHER EE AND ANOTHER WERE PUSHING ALONG WITH OTHER. AS WE ENTERED THE TRUCK THE TRAILER. STARTED TO TIP AND THE WHOLE TRAILER TIPED OVER EE STRUCK THE TOP AND SIDE. OTHER WENT OUT THE BACK AND HIT THE TRAILER OR THE GROUND.

WE WERE MOVING PALLETS OF POWDER FROM TRAILER TO TRUCK. I WAS RUNNING THE PALLET WHILE 4 OTHERS WERE PUSHING. AS WE ENTERED THE TRUCK THE TRAILER TIPPED OVER. ONE PERSON STRUCK THE TOP & SIDE;

TRYING TO LAY A BOARD IN FRONT OF FEEDER TIRE.

RUNNING UP THE STAIRS TO THE SCALE SHACK, DID NOT USE HANDRAILS AND FELL ON SHOULDER.

EE WAS WALKING TOWARD SUPERVISOR & TRIPPED OVER A HOSE & TWISTED ANKLE.

EE SAYS HE GOT CARPAL TUNNEL FROM REPETITIVE SHOVELING. THIS IS BEING INVESTIGATED BY WORKERSCOMP. COMPANY.

EE WAS LIFTING WIRE FOR ELECTRICAL CONNECTION FOR THE FEEDER.

SITTING ON SCREEN TRAILER CATWALK PULLING ON COMEALONG HANDLE TO LIFT IMPACT FEED CONVEYOR TAIL PULLEY OFF GROUND

WAS WORKING ON FRONT END LOADER & SLIPPED OFF REAR TIRE & FELL TO THE GROUND.

EMPLOYEE WAS TRYING TO BREAK ROCK WITH A SLEDGE HAMMER. IT BOUNCED BACK AND HIT THE RIGTH SIDE OF HIS HEAD, BELOW THE HARD HAT.

CUTTING STEEL AND PIECE WENT INTO EYE.

RELEASED RADIATOR CAP ON 980 LOADER AND HOT WATER BURNED ABDOMEN.

WAS USING A TWO POUND HAMMER TO KNOCK OUT A PIN FROM CHAIN LINK. MISSED THE PIN AND HIT HIS HAND.

STEPPED OFF THE KOBELCO, AND STEPPED ON A ROCK WITH HIS LEFT FOOT AND SPRAINED HIS ANKLE.

WAS WORKING ON THE CONVEYOR HEAD PULLEY, USING THE L JAY SCREEN AS A PLATFORM TO STAND ON WHILE PRYING ON THE HEAD PULLEY THE PRY BAR SLIPPED AND HE FELL FROM A STANDING POSITION ONTO THE CATW ALK AND CUT HIS EAR OPEN AND BUMPED HIS HEAD.

WAS WALKING DOWN THE LADDER, PUNCTURED A WELDING ROD UNDER LEFT ARM PIT.

PULLED MUSCLES IN LOWER BACK WHEN LIFTING A PIECE OF STEEL.

OPERATING CAT RIPPER CAUSED SHOULDER STRAIN.

WAS WORKING ON THE D-10 CAT, WRENCH SLIPPED AND CUT THE BACK OF HIS LEFT HAND.

WAS HELPING PUT HYDRAULIC CYLINDER ON BOBCAT. WAS LINING UP CYLINDER TO PUT BOLT BACK WHEN CYLINDER DROPPED & SMASHED FINGER AGAINST MAIN FRAME OF BOBCAT. FINGER WAS BROKEN.

HE WAS LIFTING A 5 GAL BUCKET OF OIL OVER HIS HEAD TO SET IT ON THE CAT WALK OF A MACHINE,WHEN HE FELT A PULL IN HIS LOWER BACK.

INJURED WA REMOVING PLATES FROM CRUSHER WHEN IT SLIPPED WORKER PLACES HAND OVER FACE TO PROTECT HIS FACE. CUT FINGER, NOSE AND BROKE HIS GLASSES.

HE WAS STANDIN1 OFF TO THE SIDE, CLEANING THE SURFACE OF A MANGANESE CRUSHER, MANTLE LINER WHEN IT FELL AND HIT SOME WOOD CRIBBING AND FLIPPED OVER AND STRUCK HIS LEG.