Buscar en el registro

FELL OF 5 1/2" CONE. HIT RIGHT ANKLE ON TRUCK BED.

HE WAS USING A PICK TO CLEAN PACKED DIRT OUT OF THE FEEDER. AS HE CAME DOWN WITH THE PICK HI HITTHE SIDE OF THE FEEDER AND DEFLECTED AND HIT HISLOWER RIGHT LEG.

EE STEPPED OFF THE GRADER, HUNG HIS FOOT UP AND FELL FADE DOWN ON THE CONCRETE FLOOR. HE FELL ON HIS HANDS AND KNEES. HIS LEFT ARM ABSORBED MOST OF THE FALL. HE FRACTURED A BONE IN HIS LEFT FO REARM.

PUNCTURED THUMB WHILE TIGHTENING HOSE CLAMP WITHA SCREWDRIVER.

SLIPPED AND FELL ON HIS BACK.

LIFTING GEAR REDUCER ONTO SHAFT ON HEAD PULLEY ON CONVEYOR. INJ WAS NOT REPORTED UNTIL 5/18/01

EE WAS STANDING ON A PLANK WELDING EYE BOLTS ON THE CONVEYOR OF THE CRUSHER THE PLANK BROKE AND EE FELL INTO THE CRUSHER STRAIGHT DOWN SOMETHING HIT HIM IN THE NEED WHEN HIS HARD HAT FELL OFF. REQUIRING S STITCHES. HE IS SORE-HIS REMOVED HIS STITCHES AND HE DID NOT MISS ANY WORK.

EE WAS DOING REPAIR WORK ON CAB OF 773B CAT TRUCK. EE STARTED TO GET OFF TRUCK, LOST BALANCE AND FELL ON CONCRETE.

EE WAS UNHOOKING ELECTRIC SERVICE FROM WELDING MACHINE AND WAS SHOCKED.

EE WAS CLIMBING INTO THE TRACKHOE WHEN THE DOOR SLAMMED SHUT ON HIS ELBOW.

EE WAS TURNING TO THE LEFT AFTER PLACING A BAG OF TURKEY GRIT ON A PALLET KNEE & FOOT ON RIGHT LEG FAILED TO TURN WITH BODY INJURED RIGHT KNEE

EMPLOYEE WAS CLIMBING INTO THE LOWER 6X16 SCREENAT THE NORTH PLANT. HE DRAGGED HIS ARM ACROSS A SHARP POINT STICKING UP FROM THE SCREEN DECK. HECUT HIS RIGHT FOREARM AND NEEDED 26 SUTURES.

EMPLOYEE WAS TIGHTENING A BOLT WHEN THE WRENCH SLIPPED OFF AND EMPLOYEE FELL BACK AND HIT HAND ON GUARDRAIL.

EE WAS UNLOADING SCREEN PANELS FROM A TRAILER. THE JACK BROKE AND THE TONGUE OF THE TRAILER FELL ON TOP OF THE EE'S RIGHT FOOT.

EMPLOYEE WAS ADJUSTING V-BELTS WHEN IT SLIPPED AND SMASHED HIS FINGER.

HOLDING SLEDGE HAMMER FOR ANOTHER EE TO TIGHTEN NUT ON OMNICONE CRUSHER EE'S SLEDGE DEFLECTED OFF OTHER SLEDGE & HIT INJ EE IN THE EYE. SAFETY GLASS BROKE CAUSING LACERATION TO LEFT EYE

BUMPED HIS HEAD WHEN HIS KNEE CAME OUT OF JOINT, IT HAPPENED WHEN HE WAS WALKING UP THE STEPS.

NO ONE WAS INJURED. THE ACCIDENT HAPPENED IN THE QUARRY. WHILE MOVING THE SHOVEL THE OPERATOR WAS NOTIFIED THAT THE ENGINE COMPARTMENT WAS ON FIRE, THE OPERATOR THEN SHUT THE SHOVEL DOWN, ACTI VATED THE FIRE SUPPRESION SYSTEM, AND EXITED THEMACHINE, THE FIRE WAS UNCONTROLABLE AND ENGULFED THE SHOVEL ENGINE COMPARTMENT. TOTAL LOSS.

THE EE WAS KNEELING AND TRIED TO STAND HIS RIGHT KNEE LOCKED UP.

EE WAS STANDIJNG ON TOP OF THE HANDRAIL ON THE FIRST LEVEL PUTTING THE WATERHOSE ON THE SECOND LEVEL OF THE CRUSHER PLATFORM. HE SLIPPED AND FELL OFF HITTING THE HANDRAIL. HE FELL 7 FEET AND B ROKE 4 RIBS.

ON 6/9/00, HE BENT DOWN TO PICK UP SOMETHING & COMPLAINED OF A PULLED MUSCLE. HE CONTINUED TO WORK. THIS WASN'T CONSIDERED A REPORTABLE ACCIDENT TO US UNTIL HE MISSED WORK ON 6/19/00; HIS DO CTOR'S OFFICE CALLED US TO VERIFY THAT WORKER'S COMP WOULD PAY FOR HIS VISIT. THIS WAS 1ST INDICATION THAT HE HAD A REPORTABLE INJURY. HE WAS ABSENT FROM WORK 6/19/00-6/24/00; RETURNED 6/26.

LONG TERM EXPOSURE TO AIRBORNE DUST.

LONG TERM EXPOSURE TO AIRBORNE DUST.

LONG TERM EXPOSURE TO AIRBORNE DUST.

LONG TEM EXPOSURE TO AIRBORNE DUST.

LONG TERM EXPOSURE TO AIR BORN DUST.

SLIPPED AND FELL ON MATERIAL FROM DISCHARGE CHUTE WHILE BOLTING ON A NEW FLAP. FRACTURED LEFT RING FINGER.

CUTTING BELTING MATERIAL W/RAZOR KNIFE--KNIFE SLIPPED, CUTTING EMPLOYEE ON RIGHT THIGH.

TIGHTENING COME-A-LONG TO SPLICE BELT COME-A-LONG SLIPPED. HE FELL OFF 2 TON TRACK AND LANDED ON HIS BACK AND NECK.

EE HAS PINS IN ONE OF HIS DISCS IN HIS LOWER BACK. THE PINS ARE WORKING LOOSE DUE TO THE OPERATION OF THE TRACK-HOE. LATE NOTICE DUE TO EE TURNED IT IN ON HIS INSURANCE THEN DECIDED WORKMAN'S COMP.

EMPLOYEE WAS WALKING UNDER #7 CONVEYOR AND WAS STRUCK BY A 4" DIMATER ROCK ON THE HEAD, EMPLOYEE WAS WEARING HARD HAT. THE HARD HAT WA STRUCK CAUSING A LACERATION TO THE RIGHT SIDE ABOVE EAR.

UNLOADING TIN HORN.

EE WAS IN THE PROCESS ON CHANGING OUT BIT IN DRILL & THE BIT FELL OUT OF CHUCK LANDING ON HIS LITTLE FINGER OF LEFT HAND SMASHING THE TIP JUST UNDER THE FINGERNAIL CUTTING A PIECE OUT.

STRAINED LOWER BACK MOVING A STEEL PIN WEIGHING ABOUT 75 POUNDS FROM ONE PLACE TO ANOTHER. THE PIN HAD OIL ON IT AND EE WAS HOLDING IT WITH BOTH HANDS AWAY FROM HIS BODY CAUSING LOWER BACK STR AIN.

EE WAS WALKING FROM PRIMARY CRUSHER TO GREASE HOUSE. THE WEATHER WAS RAIN AND SLEETING. EE SLIPPED OR TRIPPED AND FELL.

EE WAS WALKING ACROSS THE PUMP PLATFORM, HE STEPPED OVER A PIPE AND TWISTED HIS ANKLE.

EE BEGAN MOVING CARS WITH HIS HEAD OUT THE WINDOW WATCHING THE TRACKS. HE HIT LOADED CARS AT A SPEED OF 3-5 MPH. THIS KNOCKED HIS SHOULDER INTO THE WINDOW FRAME.

STACKING POWDER BOXES IN TRUCK, GRABBED A BOX, TWISTED TO PUT IT DOWN, WRENCHED BACK.

BROKE BONE JUST UNDER LEFT KNEE EE WAS WORKING IN THE SOP THE AIR HOSE WAS HOOKED TO LUB TRUCK AND RUNNING FROM SHOP AIR. EE JUMPED INTO LUBE TRUCK TO MOVE IT WHEN HE BECAME ENTANGLED WITH THE AIR HOSE CAUSING HIM TO BE PULLED DOWN AND OUT OF SHOP BY MOVING LUBE TRUCK AND AIR HOSE.

EE WAS REPLACING RETURN ROLLER ON CONVEYOR. ROLLER FELL AND LANDED ON EE'S FINGER.

EE WAS ADJUSTING THE CRUSHER USING A HYDRAULIC CYLINDER WHEN THE ROTATION OF THE HEAD CAUGHT HIS RIGHT HAND GLOVE AND PULLED HIS FINGER INTO THE PINCH POINT. IT BROKE HIS FINGER AND PULLED THE MEAT FROM THE BONE.

EE WAS CLIMBING DOWN FROM THE SCREEN AND LOST HIS FOOTING. HE FELL FROM THE SCREEN PLATFORM TO THE GROUND.

EE SLIPPED ON SCREEN TOWER WHILE CHECKING SCREENS

EE SLIPPED WHILE CLIMBING DOWN FROM GRAVEL DUMP TRAILER & PULLED MUSCLE IN HIS BACK

EE WAS CUTTING ON A BOLT WITH A CUTTING TORCH AND A PIECE OF THE METAL FELL IN TO HIS LEFT EYE.

EE WAS DISMOUNTING FROM HIS TRUCK TO GET A MATERIAL TICKET. HE WAS FACING AWAY FROM HIS TRUCK, STEPPING ON THE LOWER STEP OF HIS TRUCK TRACTOR. EE'S FEET BECAME TANGLED WITH EACH OTHER AND HE FELL TO THE GROUND ON HIS HANDS & KNEES.

EE WAS ALIGNING GANTRY STAND ON DROPBALL AND SLIPPED FALLING TO THE GROUND APPROX 12-13-FEET.

EMPLOYEE WAS HELPING WITH MAINTENENCE BY INSTALLING TAIL PULLEY ON THE G-8 CONVEYOR BELT. EMPLOYEE'S FINGER BECAME CAUGHT BETWEN TAIL PULLEY SHAFT AND CONVEYOR FRAME AS TAIL PULLEY WAS BEING P OSITIONED.

EMPLOYEE WAS OPERATING A DROP BALL CRANE. THE CRANE SLIPPED OUT OF GEAR AND STARTED DOWN RAMP. EMPLOYEE JUMPED OUT OF THE CRANE WHILE IT WAS GOING DOWN THE RAMP.

WORKING ON SCREEN DECK WEHN DUST FELL INTO EYE.