Florida Rock Industries Inc · Golpeado por objeto proyectado
EMPLOYEE DID NOT HAVE SAFETY GLASSES ON.
GA CENTRAL MAINTENANCE SHOP Metal/Non-Metal
Florida Rock Industries Inc
· Surface
Controlada por
Vulcan Materials Company
Monroe Condado,
GA
·
Abandoned
ID de mina MSHA: 0900963
Registro de la MSHA sobre GA CENTRAL MAINTENANCE SHOP (ID de mina 0900963). Muertes, incidentes no mortales agrupados por año, operador y controlador actuales, y contexto de la mina.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en GA CENTRAL MAINTENANCE SHOP.
- Muertes
- 0
- Incidentes totales
- 10
- Años en registro
- 1986–2000
- Último incidente
- Aug 2000
Actividad de inspección
Inspecciones de MSHA desde 2000
2
inspecciones registradas
12
horas de inspección
n/d
citaciones por 100 horas de inspección
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Tasa retenida: 12 horas de inspección son muy pocas para una tasa estable. Se requiere un mínimo de 1,000 horas de inspección.
Fuente: datos de inspecciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.Citaciones por millón de horas trabajadas, según lo reportado a MSHA
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2001 Q1 | 1,676 | 0 | 0 | 0.0 |
| 2000 Q4 | 4,423 | 0 | 0 | 0.0 |
| 2000 Q3 | 5,275 | 0 | 0 | 0.0 |
| 2000 Q2 | 4,698 | 0 | 0 | 0.0 |
| 2000 Q1 | 5,206 | 0 | 0 | 0.0 |
No se registran muertes en esta mina.
Incidentes reportables
10 en archivo2000 · 1 incidente
1988 · 8 incidentes
Florida Rock Industries Inc · Atrapado en, bajo o entre un objeto en movimiento y uno fijo
WHILE MOVING A FEEDER GATE LITTLE FINGER ON LEFT HAND WAS CAUGHT BETWEEN THE TUNNEL WALL AND FEEDER 4 MEN WERE HANDLING THE FEEDER TO TURN IT AROUND WHEN IT CAUGHT ON THE CONVEYOR AND PIVOTED CATCHING HIS FINGER AND CAUSING A LACERATION
14 de diciembre de 1988
GA · Metal/No metálico
Soldador (de taller)
HERRAMIENTAS MANUALES (SIN MOTOR)
Florida Rock Industries Inc · Golpeado por... no clasificado en otra parte
THE INJURED WAS REPAIRING A BOOT ON HIS WELDING CABLE USING A KNIFE TO CUT A PLASTIC TIE.THE KNIFE SLIPPED AND PUNCTURED HIM IN THE CHEST.HE WAS PULLING THE KNIFE TOWARD HIM.
28 de octubre de 1988
GA · Metal/No metálico
Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo
TRANSPORTE MOTORIZADO
Florida Rock Industries Inc · Golpeado contra un objeto en movimiento
EMPLOYEE WAS DRIVING A SERVICE TRUCK AND ROAD CONDITIONS WERE HAZARDOUS AND HE WAS DRIVING TOO FAST FOR CONDITIONS HE RAN A STOP SIGN AND HIT AN EMBANKMENT. HE COMPLAINED OF SORENESS IN THE NE CK ON THE NEXT DAY 10-29-88 AND WENT TO DR FOR TREATMENT.
Florida Rock Industries Inc · Sobreesfuerzo, no clasificado en otra parte
EMPLOYEE SAID THAT HE FELT HIS MUSCLE PULL IN HIS LOWER BACK WHILE CLIMBING A LADDER TO GET ON A TRAIN TO PAINT IT.
Florida Rock Industries Inc · Golpeado por objeto que cae
THE INJURED AND ANOTHER EMPLOYEE MOVING A 380# PIECE OF IRREGULAR SHAPED PLATE STEEL FROM A FAB TABLE AND SETTING IT DOWN ON THE FLOOR.OTHER EMPLOYEE SET HIS END DOWN AND WENT TO HIS SIDE TO S TAND PLATE UP ON ITS END AND THE INJURED LOST HIS GRIP AND DROPPED THE PLATE APPROXIMATELY 18" ONTO THE BRIDGE OF HIS LEFT FOOT.
Florida Rock Industries Inc · Golpeado por... no clasificado en otra parte
THE EMPLOYEE WAS ATTEMPTING TO DISLODGE SOME MATERIAL FROM A SAND BLASTING MACHINE IN THE LOWER VLAVE AREA.HE ATTEMPTED TO DISLODGE THIS MATERIAL BY OPENING AND SHUTTING THIS LOWER VALVE.HE DI SCONNECTED THE MAIN SUPPLY HOSE AND KNEELED DOWN TO VISUALLY INSPECT THE VALVE.AT THIS TIME A SMALL AMOUNT OF PRESSURE BLOWING SAND INTO THE FACE OF EMPLOYEE RESULTING IN ABRASION TO NOSE AND
Florida Rock Industries Inc · Quemaduras por destello (soldadura)
EMPLOYEE WAS WELDING WITH AN ELECTRODE HOLDER AND RECEIVED FLASHBURNS FROM REFLECTION INSIDE HIS LENS FROM ANOTHER WELDER INNTHE SAME AREA.WELDERS WERE WELDING IN A CONFINED AREA.
Florida Rock Industries Inc · Golpeado por... no clasificado en otra parte
EMPLOYEE WAS HITTING ROLLER WITH I# HAMMER AND HAMMER HIT RETURN ROLLER GUARD DEFLCTING HAMMER INTO LEFT AHND CAUSING CONTUSION OF LEFT AHND.EMPLOYEE WAS INSTRUCTED TO SURVEY THE AREA TO BE W ORKED IN BEFORE PROCEEDING WITH WORK AND BE MORE CONSCIENTIOUS ABOUT HIS JOB.
1986 · 1 incidente
Florida Rock Industries Inc · Golpeado por objeto que cae
DAY BEFORE HAD 7ACKED WELDED LIP WITH 10 2" TACK WELDS ON 12' SECTION OF BUCKET LIP; DAY OF INJURY THE LIP WAS BEING PREHEATED WITH HEATING TUBE AND TORCHES; ALL 10 TACK WELDS BROKE LOOSE SIMU
For insurers, brokers, and safety consultants
The full compliance file on GA CENTRAL MAINTENANCE SHOP
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.