Arch Resources Inc: 23 muertes registradas controlador

Employee was standing on 172 shield and advancing 173 shield towards the face. The employee was found with an injury to the back of the head at 171 shield.

The employee received a fatal injury after being struck by falling rock.

Employee was shoveling coal off a conveyor belt, belt moved forward causing miner to fall down transfer chute onto belt conveyor that transferred EE to stacker tube where EE fell onto coal pile.

Employee received head injuries while attempting to re-rail a Longwall electrical power car using air lifting bags in the 10 Headgate-16 block spur.

A fatal incident occurred while traveling the external slope on a rubber tired four wheeler.

A Millwright drove the pins out of a 200-ton crane boom to change out a section and the boom fell on employee.

The victim was servicing/working on the C/M around the scrubber motor area when a piece of the coal rib measuring approx. 3'L x 2'H x 15"T rolled out crushing the victim against the machine.

Diesel Motor operator was found on the motor unresponsive, the exact cause of death is unknown at this time.

While workers were cleaning up material that was removed from a new coal transfer borehole using a continuous miner, a section of rib/brow fell from the inby portion of the entry and continued outby pulling rib bolts. The material rolled down the rib and struck the miner operator causing fatal crushing injuries to chest and abdomen.

The technician was assisting in moving a 2800 P&H shovel when the machine lost propel capabilities. The machine then rolled in reverse striking the pickup driven by the technician causing fatal injuries.

While conducting retreat mining on 6-Left Panel off B-4 Mains, a coal/rock outburst occurred inby break #35. The outburst involved the continuous miner operator who suffered fatal blunt force injuries to his head, chest, and legs.

While the injured was attempting to change the batteries on the # 8 scoop, the # 11 scoop was traveling outby and impacted the # 8 scoop causing it to move and pin the victim against the coal rib.

The employee received fatal injuries when he was struck by a rock that fell from the mine roof. He was involved with longwall shield recovery and was building wooden cribs in an area where a shield had been removed. While in the process of constructing the cribs, he was struck by falling roof material.

Working on a structure 15' high & was safely tied off to structure, when he completed his work, instead of stepping onto platform from beam he was standing on while tied off - he untied and then stepped and fell 8' onto another 5 1/4" beam with his chest. He walked to the company truck and sat down ambulance arrived, got in and died in route to the hospital.

While directing activities to re-support ribs in an intersection, a rib roll struck a standing roof support which in turn struck the foreman in the head causing fatal injuries.

Hauler backed over the outslope. The hauler traveled approximately 150 feet down the spoil pile. The operator was ejected from the cab of the hauler. Operator was a contract worker.

Victim, experienced miner working inside fan structure with another ee using grinder 8-10 ft from secure barrier to protect from shaft area. While grinding, other miner noticed ee missing. After search, his body was discovered at shaft bottom. Incident didn't involve non-compliance w/MSHA rules/regs. Investigation ongoing, but appears victim voluntarily jumped to his death

Employee was found pinned between the #4 mobile bridge unit and the section lo-lo conveyor belt structure. He was apparently troubleshooting a report of weak tramming on the left side of the mobile unit. There were no witnesses to the accident.

VICTIM WAS HELPING MOVE AN IRON-BOUND SHIELD ON THE 3LPE LONGWALL FACE. CHAIN SLINGS WERE CONFIGURED TO ATTACH THE IRON BOUND SHIELD TO THE CONVEYER. THE VICTIM GOT ONTO THE IRON-BOUND SHIELD AND ATTEMPTED TO OPERATE A FUNCTION. AS PRESSUREWAS APPLIED, A HOOK ON THE CHAIN ASSEMBLY FAILED, AND THE CHAIN SLING ASSEMBLY HIT THE VICTIM. MASSIVE HEAD TRAUMA AND FRACTURED NECK.

THE OFF-STANDARD CAR OPERATOR IN THE 7 LEFT SECTION WAS FOUND FATALLY INJURED, PINNED BETWEEN THE CAR CANOPY AND THE RIB. THE CAR WAS STOPPED AT THE FEEDER BREAKER FOR THE SECTION. AN INVESTIG ATION IS UNDERWAY TO DETERMINE FURTHER INFORMATION.

INDIVIDUAL WAS FOUND DEAD IN SUMP.

EE WAS ON EXCAVATOR. HE WAS IN LOOSE ROCK ON HILLSIDE. HE LOST CONTROL WHEN TRACK GOT ON ROCK. THE EXCAVATOR ROLLED PINNING THE EE UNDERNEATH.

VICTIM WAS DRIVING A WAGNER DIESEL POWERED SCOOP OUT OF THE MINE WHEN FOR SOME UNKNOWN REASON, THE SCOOP TRAVELED BACK DOWN THE SLOPE AND THE CANOPY STRUCK AN "I" BEAM ON A OVERCAST WHICH CAUS ED THE CANOPY TO DEFORM, STRIKING THE VICTIM, INFLICTING FATAL INJUIES.