Buscar en el registro

On 5/18/2026, the team member sustained an injury to the left shoulder when EE was struck by a chain while moving a section of poly pipe. As a result of the injury, surgery was subsequently performed on 9/15/2026.

Employee was injured while dismounting a 773D Haul Truck.

Employee injured finger when a piece of coating dislodged from inside kiln preheater while they were cleaning transfer chute.

Employee was laying down using a 5" vacuum hose to clean underneath of a conveyor belt. The hose lost its suction and jumped forward and then back into the face of the employee. When this happened the employee got a loose tooth from it. The employee went to the dentist two weeks later and got the tooth removed.

An electrician was involved in an arc flash type event which resulted in burns on EE's left hand.

Rigid frame water truck drove onto right hand side berm, causing the truck to lay over. Employees are was caught between the cab of the truck and the ground

The White River breached the levee at the northeast corner of the mine; this was due to extensive rain and flooding in the area. Water inundated the open pit.

Employee notified mine management of pain in their shoulder / neck area from operating the yard loader. Employee was seen by a Dr. on 09/14/2026 and given physical therapy.

Employee was striking a log paddle, and a shard of steel entered their arm from a steel hammer.

EE was backing down out of cab of truck on drivers side. EE was holding drivers door with both hands & feet on top step. As they stepped down their left foot made contact with the lower step but slipped off. As they started to fall their body rotated outward away from cab & lost grip of door. During the fall they balled up & landed on their left shoulder onto a flat gravel lot.

While changing the wear segments on the -3 loader, EE removed the retaining nuts. EE began driving the bolts out from the top-down using a hammer. After striking one of the bolts the hammer contacted the edge of a loose nut that was resting adjacent to the bolt hole. The impact caused the nut to become airborne and strike EE in the mouth, resulting in an injury to EE tooth.

Miner injured their bicep when lifting dehumidifier box. Became reportable at time of surgery on 8/18/2026

Miner injured bicep while reinstalling guard. Accident became reportable when surgery was performed on the injury.

Miner was moving bearing. The bearing slipped, causing an injury to right shoulder.

Employee sustained laceration on forearm from bolt on hand rail.

Employee injured right bicep while lifting pump out of crate. Injury became reportable on July, 2nd 2026 due to restricted work.

EE driving a vehicle hit a berm and received a laceration to the face.

EE lifting hose out of tunnel pinched finger between fitting and egress ladder rung.

Employee was attempting to manually move the conveyor hopper box and lost EE's footing. Fell backwards to the floor, striking EE's head.

Weather conditions caused a rise in the Big Nemaha River water level. This resulted in flood water that inundated Dubois Quarry.

Employee attempted to move a drill steel and felt a pop in the left elbow. Was not reported until one week later. Injury became reportable when surgery was performed on 07/08/2026

Miner injured EE's left elbow when a shelving unit tipped away from the wall. Became reportable on 6-29-26 when miner had surgery

EE struck by screen panel resulting in contusion to left foot

Employee felt a pop in left knee when mounting water truck. Employee has had a previous knee injury. Not determined until May 6th that this was a new injury and not a reoccurrence.

EE middle left finger fractured when struck between bucket tooth and shank of WA800 loader

The associate was drilling through a rubber sheet and the drill bit went through the rubber sheet and contacted EE's hand resulting in a laceration.

Metal plate fell onto employees foot. Incident did not become reportable until 2/16/2026 when employee sought metal attention and was diagnosed with fractures.

Miner injured EE's knee while working on a slurry pipe. Injury became reportable on 6-11-26 when surgery was performed to repair a torn meniscus.

EE was struck by belt from behind causing EE to come in contact with belt rolling frame.

Upon completing repairs to a 336 excavator, then descending from the machine, left foot touched the ground, the Technician felt a pop in their Left knee. Pain increased over the next few days, and Technician decided to seek medical attention. All PPE was properly worn at the time of the incident.

Employee injured left arm while fusing pipe

EE was cutting wedge bolt from stationary jaw dye. While cutting the wedge bolt, the bolt sheared and made contact with EE's welding hood that they were wearing. The frame that holds the lens in the welding hood broke loose and lacerated EE above their left eye. EE received 12 stitches above left eye.

Due to personal medical illness, employee fell out of pickup truck parked at electrical room in the secondary plant. They suffered a laceration to the forehead and received stitches.

Employee was operating a 992K loader while loading customer trucks when EE heard a "pop" in EE's right wrist while using the control handles.

Loosening a bolt with with an impact wrench and socket wrench. Hand slipped off wrench and was struck in face.

The employee was operating a WA600 loader and, while moving backward to forward on level ground, experienced neck & shoulder pain. This became reportable on 12/30/2025 after the employee was placed on restrictions following an orthopedic evaluation.

Employee was injured when they fell walking to the troop carrier. Injury became reportable on 11-18-25 when an orthopedic specialist diagnosed a left shoulder partial rotator cuff tear and left shoulder proximal humerus fracture. Physical therapy was also ordered.

Employee for C & L Machine and Welding and foreman for Martin Marietta were standing on-site looking at a tooth on a bucket to see which one had to be removed. Employee tapped the tooth with a hammer and a metal splinter went into EE's groin area.

While installing a cylinder in a scaling machine, a lifting strap failed. The failed strap section hit the employee in the eye causing a scratch to the cornea. All proper PPE was worn.

Employee Strained arm while tightening a ratchet strap.

Carolina Cat technician was entering through an interior door when the door closed on EE's hand.

Smoke was observed coming from the surge tunnel. The fire department was dispatched.

Employee was adjusting the bowl on Omnicone 1560 crusher when EE's right thumb was caught between two adjusting cylinders. EE's right thumb was fractured.

Employee rolled left ankle resulting in a fracture

Employee was struck by foreign object in the eye during maintenance. Foreign object was removed from eye.

(Illness) Employee was standing and passed out, fell to the ground, and received a cut on EE's head from the ground. (total time passed out was less than a minute). EE was taken to the hospital, received 3 stitches to close the cut along with IV's. EE was then released, told to stay home one day, permitted by the doctor to drive self home. EE has been working since then.

A piece of loose material contacted the employee on the right arm and left leg. Required stitches.

Employee smashed finger removing rock from crusher

The employee was removing metal from a conveyor, and while going to dispose of it, the employee lost control of the metal object and pinched their hand between the metal and the handrail. This resulted in a laceration and a broken finger.

While removing an expanded metal guard bent around a motor shaft, the guard flexed back to a straight position after the bolt was removed striking and cutting the employee's nose. employee received 5 stitches.