Mining Incidents
Abandoned mine inventory

Abandoned mines in Labette County, Kansas

Labette County, Kansas has 52 mine and prospect features on USGS topographic maps published 1944–1974. OSMRE's abandoned mine land inventory lists 5 problems in the county, 5 of them not yet reclaimed. MSHA's register carries 12 mines in the county with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps covering Labette County, every OSMRE abandoned mine land problem in the county, and every MSHA-registered mine here with status Abandoned. Named features are listed below; unnamed ones are counted by type. Locations are deliberately not shown: this page says what abandoned workings are in the county, not where to find them. They are dangerous and should not be entered.

Mapped mine features (USGS)
52
Mine openings
0
OSMRE problems unreclaimed
5
MSHA mines marked abandoned
12
0 features carry a name0 prospect pits11 quadrangle maps, published 1944–1974 5 OSMRE problems, 0 reclaimed 3 MSHA mines abandoned and sealed
What the features are
  1. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    23 40.4%
  2. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    29 50.9%
  3. Dumps, tailings, spoil and gob
    what mining left above ground
    2 3.5%
  4. Other reclamation problems
    highwalls, subsidence, polluted or clogged water, fires, slides and gases in OSMRE's inventory
    3 5.3%
OSMRE abandoned mine land problems5 on inventory
Problem area Problem Status
Bartlett P3 Gobs Reclamation Pending
Bartlett P3 Pits Reclamation Pending
Bartlett P3 Spoil Area Reclamation Pending
Bill's Chetopa P2 Dangerous Highwalls Reclamation Pending
South Oswego P2 Dangerous Highwalls Reclamation Pending

Problem types carry OSMRE's priority prefix: P1 and P2 are threats to health, safety and property, P3 is environmental. A problem area is a cluster of problems reclaimed as one project; several rows can share one location.

MSHA-registered mines with status Abandoned12 on register
  1. Alpha
    Surface coal · Ranchers Coal Company Inc · MSHA ID 1401496
    Abandoned and Sealed
  2. Chetopa
    Surface coal · Bills Coal Company Inc · MSHA ID 1401270
    Abandoned and Sealed
  3. Chetopa #40
    Surface metal/non-metal · Midwest Minerals Inc · MSHA ID 1400139
    Abandoned
  4. Chetopa No 20
    Surface metal/non-metal · Midwest Minerals Inc · MSHA ID 1400861
    Abandoned
  5. Curnutte Quarry
    Surface metal/non-metal · Labette County Highway Department · MSHA ID 1401067
    Abandoned
  6. Harry Byers & Sons Inc
    Surface metal/non-metal · Harry Byers & Sons Inc · MSHA ID 1400062
    Abandoned
  7. Keith Quarry & Mill
    Surface metal/non-metal · Harry Keith & Sons Inc · MSHA ID 1400103
    Abandoned
  8. Parsons No 3
    Surface metal/non-metal · Midwest Minerals Inc · MSHA ID 1400609
    Abandoned
  9. Ruttgen Quarry
    Surface metal/non-metal · Labette County Highway Department · MSHA ID 1401366
    Abandoned
  10. Screening Oper/Dredge Operation
    Surface metal/non-metal · Carder Inc · MSHA ID 0504581
    Abandoned
  11. T & M Stone Quarry LLC
    Surface metal/non-metal · T & M Stone Quarry LLC · MSHA ID 1401731
    Abandoned
  12. The Alpha Mine
    Surface coal · Oswego Coal Company Inc · MSHA ID 1401415
    Abandoned and Sealed

Status and date are as reported to MSHA by the operator. Each mine's own page carries its accident, citation and inspection record.

By source vocabularythe publishers' own terms
Feature type Features
Quarry 18
Strip Mine 16
Gravel Pit 8
Open Pit Mine or Quarry 7
Gravel Pit 2
P2 Dangerous Highwalls 2
Quarry 1
P3 Spoil Area 1
P3 Pits 1
P3 Gobs 1
Other counties in KansasAll counties →
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened as a working mine, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s. The three overlap and are never added together. The county is assigned from each feature's coordinates against the Census 2023 county boundaries. The full method is on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.