Mining Incidents
Abandoned mine inventory

Abandoned mines in North Carolina

North Carolina has 2,356 mine and prospect features on USGS topographic maps published 1905–2003, including 82 mine openings (shafts, adits and air shafts), across 98 counties. OSMRE's abandoned mine land inventory lists 4 problems in the state, all of them reclaimed. MSHA's register carries 847 North Carolina mines with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps of North Carolina, every OSMRE abandoned mine land problem, and every MSHA-registered mine with status Abandoned, by county. Each county page lists the named features and links every MSHA mine to its own record.

Mapped mine features (USGS)
2,356
Mine openings
82
OSMRE problems unreclaimed
0
MSHA mines marked abandoned
847
98 counties with mapped features47 features carry a name2 prospect pitsmaps published 1905–2003 4 OSMRE problems, 4 reclaimed4 problem areas (PADs), 0 with work left 0 MSHA mines abandoned and sealed The state program's own inventory estimate: at least 130 sites (IMCC-NAAMLP Hardrock AML Report 2025, Table 5, page 46).
By countyranked by mapped USGS features
County USGS features Openings OSMRE problems MSHA abandoned
Macon County
201 1 0 26
Mitchell County
165 24 0 27
Yancey County
113 5 0 21
Jackson County
110 0 0 13
Cumberland County
100 0 0 30
Harnett County
76 0 0 17
Avery County
76 24 0 11
Johnston County
64 0 0 18
Robeson County
57 0 0 7
Rowan County
55 0 0 24
Wayne County
52 0 0 19
Brunswick County
41 0 0 17
Buncombe County
39 1 0 11
Sampson County
38 0 0 6
Henderson County
37 0 0 6
Wake County
36 0 0 7
Cabarrus County
35 2 0 17
Moore County
34 0 1 18
Pitt County
34 0 0 27
Bladen County
29 0 0 3
Mecklenburg County
29 0 0 3
Cherokee County
28 3 0 14
Bertie County
28 0 0 9
Lenoir County
26 0 0 20
Gaston County
26 2 0 10
McDowell County
25 0 0 26
Guilford County
24 0 0 12
Pender County
23 0 0 10
Anson County
23 0 0 4
Transylvania County
23 1 0 1
New Hanover County
22 0 0 9
Chatham County
21 0 2 13
Stanly County
21 0 0 11
Davidson County
21 0 0 10
Union County
21 12 0 2
Surry County
20 0 0 9
Onslow County
20 0 0 5
Wilkes County
20 0 0 5
Swain County
20 0 0 2
Lee County
19 0 1 11
Montgomery County
19 0 0 18
Stokes County
19 1 0 8
Haywood County
19 1 0 3
Rockingham County
18 0 0 9
Beaufort County
16 0 0 8
Orange County
16 0 0 5
Madison County
16 0 0 0
Craven County
15 0 0 19
Cleveland County
14 0 0 21
Hertford County
14 0 0 7
Carteret County
14 0 0 3
Randolph County
14 0 0 2
Halifax County
13 0 0 5
Chowan County
13 0 0 2
Alamance County
12 0 0 9
Columbus County
12 0 0 6
Hoke County
12 0 0 2
Edgecombe County
11 0 0 15
Durham County
11 0 0 5
Greene County
11 0 0 5
Washington County
11 0 0 2
Rutherford County
10 0 0 11
Northampton County
10 0 0 10
Forsyth County
10 0 0 7
Wilson County
10 0 0 6
Scotland County
10 0 0 5
Ashe County
10 0 0 2
Caldwell County
9 0 0 7
Vance County
9 4 0 2
Currituck County
8 0 0 11
Watauga County
8 0 0 9
Gates County
8 0 0 2
Nash County
8 0 0 2
Duplin County
7 0 0 10
Jones County
7 0 0 4
Granville County
6 0 0 3
Martin County
6 0 0 2
Tyrrell County
6 0 0 2
Person County
6 0 0 1
Caswell County
6 0 0 0
Burke County
5 1 0 5
Iredell County
4 0 0 8
Lincoln County
4 0 0 3
Yadkin County
4 0 0 3
Alleghany County
4 0 0 0
Richmond County
3 0 0 11
Camden County
3 0 0 8
Pasquotank County
3 0 0 6
Clay County
3 0 0 5
Davie County
3 0 0 5
Franklin County
2 0 0 10
Alexander County
2 0 0 5
Dare County
2 0 0 4
Hyde County
2 0 0 1
Perquimans County
2 0 0 1
Graham County
2 0 0 0
Catawba County
1 0 0 7
Polk County
1 0 0 3
Pamlico County
0 0 0 1
What the features are
  1. Mine openings
    shafts, adits, air shafts, portals and vertical openings: the ways into underground workings
    86 3.6%
  2. Prospect pits and trenches
    shallow exploration diggings that never became a mine
    2 0.1%
  3. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    1,141 48.3%
  4. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    1,071 45.4%
  5. Dumps, tailings, spoil and gob
    what mining left above ground
    59 2.5%
  6. Mills, tipples and facilities
    processing plants and hazardous structures
    1 0.0%
By source vocabularythe publishers' own terms
Feature type Features
Open Pit Mine or Quarry 632
Sand Pit 328
Disturbed Surface 311
Quarry 154
Gravel Pit 142
Sand Pit 103
Gravel/Borrow Pit - Undifferentiated 77
Open Pit Mine 77
Quarry 76
Strip Mine 70
Clay Pit 67
Adit 52
Open Pit Mine or Quarry 39
Tailings - Pond 36
Gravel Pit 35
Mine Shaft 29
Clay Pit 24
Sand and Gravel Pit 23
Tailings - Undifferentiated 16
Sand and Gravel Pit 14
Gravel/Borrow Pit - Undifferentiated 13
Borrow Pit 11
Settling Pond 7
Open Pit Mine 6
Disturbed Surface - Pit 4
P2 Vertical Openings 4
Borrow Pit 2
Prospect Pit 2
Quarry - Rock 2
Strip Mine 1
Tipple 1
Air Shaft 1
Coal Mine 1
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine, and several problems make one problem area (PAD), which is the unit a state program counts and reports; the public extract can also hold more problem areas than a state's live inventory, because areas since merged or ruled ineligible stay in the published file, so a state figure that differs from this one is not a contradiction. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s; that is a regulatory status rather than a physical one, and it also holds operations merely between jobs, portable crushers above all, which is why over a thousand mines carrying it have been inspected in the last two years. The three overlap and are never added together. Counties are assigned from each feature's coordinates against the Census 2023 county boundaries. The full method and every source are on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.