Mining Incidents

Sdac Oz: 28 MSHA citations Metal/Non-Metal

SDAC · Surface
Controlled by Paul Morrow
Montgomery, Montgomery County, AL  ·  Active
MSHA Mine ID: 0103544

Sdac Oz has had no fatalities among 2 reportable incidents since 2022. MSHA has proposed $5K in penalties since 2021, with $1K outstanding.

Watch this mine

Email me when a new MSHA incident is filed at Sdac Oz.

Fatalities
0
Total incidents
2
Years on record
2022–2024
Latest incident
Jun 2024
Compliance record
MSHA citations since 2021
28
citations
8
significant & substantial
$5,176
proposed penalties
$4,142
paid to date
80% of proposed penalties paid to date. The remaining $1,034 was reduced, settled, contested or is still owed.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2021
19
inspections on record
203
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 203 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Sdac Oz has $5K in proposed MSHA penalties and $1K outstanding across 0 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$4K
paid to date
$1K
outstanding
24 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-08-13.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
28.6%
significant & substantial
0.0%
high negligence or reckless
28.6%
reasonably likely or greater
32.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 7.1% low, 92.9% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-09-25
0%
of limit-tested samples over the exposure limit
7
samples
1
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg6
  • Quartz, respirable, >1% Qtz1
Show the individual readings (7)
Date Contaminant Concentration Limit Conc / limit Occupation
2026-09-25 Quartz, respirable, >1% Qtz 0.15 0.91 0.16 Front-end Loader Operator
2026-09-25 Respirable dust, <.1mg 0 Bulldozer Operator
2026-09-25 Respirable dust, <.1mg 0 Washer Operator
2023-08-17 Respirable dust, <.1mg 0 Bulldozer Operator
2023-08-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-08-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-08-17 Respirable dust, <.1mg 0 Cleanup Man
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. SDAC 2021 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 2
2025 2
2024 2
2023 3
2022 6
2021 5
Source: MSHA quarterly employment and production, updated weekly; years before 2000 come from MSHA's archived Part 50 employment files.

Sdac Oz sits in Montgomery County, Alabama, where the Census mining category is 0.0% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Montgomery County, Alabama · Population 227,197
0.0%
Mining share of county employment
$58,153
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000; earlier incidents are counted but not rate-adjusted, though reported hours reach back to 1983. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 602 0 0 0.0
2026 Q1 631 0 0 0.0
2025 Q4 565 2 1 3539.8
2025 Q3 435 0 0 0.0
2025 Q2 240 2 0 8333.3
2025 Q1 366 1 0 2732.2
2024 Q4 205 0 0 0.0
2024 Q2 605 2 0 3305.8
Show 13 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q1 651 0 0 0.0
2023 Q4 677 0 0 0.0
2023 Q3 677 0 0 0.0
2023 Q2 678 0 0 0.0
2023 Q1 779 1 0 1283.7
2022 Q4 1,435 0 0 0.0
2022 Q3 1,362 1 0 734.2
2022 Q2 1,156 0 0 0.0
2022 Q1 1,252 1 0 798.7
2021 Q4 2,074 0 0 0.0
2021 Q3 2,240 0 0 0.0
2021 Q2 3,417 2 0 585.3
2021 Q1 1,152 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

2 on file

2024 · 1 incident

June 7, 2024 AL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
SDAC · Struck by flying object

Employee was cleaning bearings near the chute when a rock came off the belt and hit the employee behind the left ear. Employee was wearing a hard hat.

Show 1 earlier incidents

2022 · 1 incident

November 16, 2022 AL · Metal/Non-Metal POWERED HAULAGE
SDAC · Accident type, without injuries

Contractor haul truck over traveled berm. no injuries to miner, no damage to equipment