MSHA record for Coral Aggregates (mine ID 0800015). Fatalities, non-fatal incidents grouped by year, current operator and controller, and mine context.
Email me when a new MSHA incident is filed at Coral Aggregates.
EE WAS LIFTING UP ON WATER PIPE ON BOOM OF DRILL AND FELT A PAIN IN HIS BACK.
EE WAS CUTTING AN ELECTRICAL CONDUIT WITH A GRINDER AND THE GRINDING WHEEL BUG INTO THE PIPE THROWING THE GRINDER VIOLENTLY AGAINST EE S LEFT LEG INSIDE OF KNEE JOINT.
EMPL CLEANING ROTOR AT PRIMARY CRUSHER WHEN ROCKS CAME DOWN FEEDER PLATE,HITTING EMPL ON RIGHT FOOT.
EE WAS WORKING WITH FELLOW EE INSTALLING SAND PUMP IN PLANT. WHEN ALIGNING THE PUMP THEY LET GO OF IT ONE THE SOUTH SIDE AND PINNING HIS LEFT PINKY FINGER BETWEEN THE PUMP AND THE BASE.
EMPLOYEE WAS INSTALLING DRIVE PINS IN DRIVE CHUCK. THE DRIVE CHUCK WAS APPERNETLYSTUCK ON THE KELLY BAR AND WAS NOT FULLY SEATED INT THE TURNTABLE. WHILE INSTALLING THE RETAINER BOLTS, THE D RIVE CHUCK FELL CATCHING HIS RIGHT PINKY FINGER.
EMPLOYEE WAS ATTEMPTING TO RELIEVE PRESSURE FROM THE RADIATOR OF EUCLID #2 DUE TO EXTREME OVERHAEATING. HE LOOSENED THE CAP 1/4 TURN AND THE PRESSURE BLEW THE CAP OFF SCALDING HIS LEFT ARM AND STOMACH.
WHILE EMPLOYEE WAS ATTEMPTING TO CLOSE THE DOORS ON A RAIL CAR.THE PRY BAR SLIPPED OUT AND HE LOST HIS BALANCE,FALLING BACKWARDS STRIKING THE RIGHT SIDE OF HIS TORSO ON THE GROUND.
WHILE CLIMBING DOWN FROM THE REAR OF LUBE TRUCK,HE PLACED HIS FEET ON THE GROUND IN AN INCORRECT FASHION CAUSING HIM TO LOOSE HIS BALANCE TWISTING HIS BODY CAUSING A MUSCLE TO SPRAIN IN HIS LO WER BACK.
EMPLOYEE WAS ATTEMPTING TO PULL THE N.W. BEARING OFF OF THE SHAFT WITH A HYDRAULIC JACK AND EXTRACTOR ASSEMBLY ONE LEG OF THE EXTRACTOR ASSEMBLY BROKE AND RECOILED, STRIKING THE EMPLOYEE IN TH E RIGHT THIGH.
I.NAME TIGHTENING THE SAFETY CHAIN ON THE OXYGEN TANK ON REAR OF THE JEEP. DRIVER OF JEEP WAS UNAWARE THAT I.NAME WAS ON THE REAR OF THE JEEP AND BEGAN DRIVING AWAY, THROWING HIM TO THE GROUND , CAUSING I.NAME TO HURT HIS LET SHOULDER.
I NAME WAS STEPPING ON THE BIG WRENCH TRYING MOVE ELECTRIC MOTOR FORWASR TO INSTALLNEW V-BELTS ON CRUSHER WHEN HE FELT A SHARP PAIN IN HIS L TESTICLE
WHILE ALIGNING THE CONVEYOR. HITING BEANING WITH A PRY BAR AND MISSED THE BEARING, HITTING THE PULLEY AND JAMMING HIS HAND INTO THE FRAME OF THE CONVEYOR.
WHILE TRYING TO FREE BRAKE ADJUSTER USING PINCH BAR EMP MISJUDGED LOCATION OF ADJUSTER A(D HIS FINGER GOT CAUGHT BETWEEN BAR AND ADJUSTER
WHEN HANDING AI9 WRENCH TO ANOTHER EMPLOYEE, HOSE BECAME DISCONNECTED AND STRUCK HIM OVER AND UNDER EYE LINE.
EMPLOYEE WELDED3SEVERAL ANGLE IRON SUPPORTS INSIDE IMPACTOR CRUSHER, WHEN HE SAT ON ONE IT CAME LOOSE. HE FELL 8-10 FEET HITTING ON ROTOR THEN CONTINUED 8-10 FEET TO SHORT CONVEYOR UNDER IMPAC TOR. 3
WHILE CUTTING A3NEW CATWALK A PIECE STRUCK ME ON MY RIGHT LEG.
I NAME WAS INST9UCTED TO GO TO HEADPULLEY OF #KM#57 STACKER AND MEASURE THE MOTOR SHEAVE AND SPEED REDUCER PULLEY TO BEGIN FABRICATION OF A GUARD FOR SAME. AT APPROX. 8:00 A.M. ANOTHER EMPLOY EE STARTED THE 057 STACKER WHICH SHOCKED ME CAUSING ME TO LOSE MY BALANCE AND IN ATTEMPT TO REGAAIN BALANCE, STUCK HAND IN THE V-BELTS AND FELL APPROXIMATELY 25' ONTO A PILE OF #57 STONE CAUSI
WHILE EE WAS US3NG THE DRY CHEMICAL FIRE EXTINGUISHER THE NOZZLE CAME OFF THE FIRE EXTINGUISHER SPRAYING DRY CHEMICALS INTO HIS EYES.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.