Email me when a new MSHA incident is filed at #7.
NO WITNESS. VIC7IM HAD TRAMMED ROOF BOLTER TO #2 HEADING WAS FOUND BY MACHINE AFTER BEING HIT BY ROOF FALL
OPERATOR WAS RUNNING SHUTTLE CAR. HE RAN IT INTO RIB AND HURT HIS NECK.
EMPLOYEE WAS USING SCOOP TO CLEAN SECTION WHEN HE ENCOUNTERED A ROCK IN THE ROADWAY SMALL ENOUGH TO BE MOVED BY HAND.HE TRAMMED TO WHERE ROCK WAS BESIDE OPERATORS COMPARTMENT OF SCOOP AND TRIE D TO MOVE ROCK WITH HIS HAND.THE SCOOP MOVED CATCHING HIS THUMB BETWEEN THE ROCK AND SCOOP FRAME.
HELPING PUT DE RAILED CAR BACK ON TRACK JACK SLIPPE KICKED OUT STRIKING HIM
EMPLOYEE WAS REMOVING CINDER BLOCKS FROM BACK STOP OF SECTION BELT FEEDER WHEN HE RECEIVED A CRUSHING INJURY WHEN (5) FIVE BLOCKS FELL ON HIS FINGER.
EMPLOYEE TURNED AROUND QUICKLY INSIDE MINE AND TWISTED HIS BACK.
EMPL SHOVELING BENEATH RAW COAL SCREEN WHEN ROCK FELL FROM SHAKER STRIKING EMPL.
EMPL WAS WALKING ON WALKWAY SIDE OF #5 BELTLINE NEAR HEAD WHEN HE STATES HE STEPPED ON ROCK & SPRAINED KNEE.
EMPL WAS ATTEMPTING TO PUT TRAM MOTOR IN PLACE WHEN MOTOR MOVED PINNING EMPL HAND BETWEEN MOTOR & LIGHT GUARD ON MACHINE.
ROCK ON TOP OF LOADING MACHINE MOVED ROCK OFF MACHINE, FELL ON FOOT
EMPLOYEE WAS LIFTING CABLE SUPPLYING POWER TO CUTTING MACHINE WHEN HE STATED HE HURT HIS BACK.
EMPLOYEE WAS USING HAMMER WHEN PIECE OF METAL STRUCK HIS EYELID
EMPLOYEE WAS CARRYING LUMBER IN 48" HEIGHT WHEN HE NOTICED DISCOMFORT IN BACK.
WAS TAKING A STEP AT #6 BELTHEAD WHEN HE TWISTED HIS ANKLE CAUSING HIM TO FALL.
EMPLOYEE WAS OPERAING LOADING MACHINE. AS HE STRUCK RIGHT RIB WITH MACHINE THE CANOPY WAS KNOCKED LOOSE STRICKING HIM ON BACK.
EMPLOYEE WAS TRAMMING ROCK TRUCKUP REFUSE FILL WHEN ENGINE STALLED. ROCK TRUCK ROLLED BACKWARD INTO DITCH LINE TURNING OVER. EMPLOYEE KICKED WINDOW OUTOF TRUCK INJURING SELF.
EMPLOYEE WAS ASSISTING ROOF BOLTER OPERATOR IN INSTALLING CABLE BOARDS. HE ADVERTENTLY GOT HIS ARM BETWEEN PINNER HEAD AND CANOPY OF ROOF BOLTING MACHINE AS OPERATOR WAS RAISING HEAD OF MACHI NE.
EMPLOYEE WAS INSTALLING ROOF BOLTS ON 001-0 SECTION. HE WAS RAISING THE HEAD OF THE ROOF BOLTER AND INADVERTENTLY GOT HIS FINGER PINCHED BETWEEN BOOM OF ROOF BOLTER AND ATRS BAR.
EMPLOYEE WAS CLEANING UNDER BELT SHAKER WITH #4 SHOVEL.AS HE WAS SHOVELING HE INADVERTANTLY STRUCK THE BALANCING WHEEL OF THE SHAKER WITH HIS RIGHT HAND.
EMPLOYEE WAS REMOVING ROCK FROM CONVEYOR-ROCK FELL STRIKING EMPLOYEES RIGHT FOOR.
EMPLOYEE WAS DRILLING ROOF WITH ROOF BOLTER WHEN HE INADVERTLY CAUGHT HIS LEFT HAND PINCHED BETWEEN BOOM AND CANOPY OF MACHINE.
EMPLOYEE WAS OPERATING ROOF BOLTER WHEN PIECE OF ROCK FELL BETWEEN RIB AND ROOF BOLT STRIKING EMPLOYEE ON BACK OF HEAD.
VICTIM WAS OBSERVING SCOOP OPER. UNLOAD SCOOP BUCKET WITH RAM OF MACHINE VICTIM WAS STANDING TO NEAR SCOOP BUCKET AND WAS STRUCK BY PC. OF METAL BEING UNLOADED.
INJURED WAS WALKING PAST SECTION POWER CENTER WHEN HE TRIPPED AND FELL AS HE FELL HE STRUCK HIS LEFT SHIN ON A HARD OBJECT
VICTIM WAS ATTEMPTING TO REPLACE EMTAL BATTERY COVER ON ELKHORN AR95 SCOOP WHEN COVER SLIPED ANTD STRCUK HIM ON K NEE.
VICTIM WAS OPERATING SHUTTLE CAR ON SECTION WHEN SHUTTLE CAR STRUCK IN HIGH TRAM. SHUTTLE CAR STRUCK RIB STOPPING ABRUPTLY WHEN IT STOPPED VICTIM STRUCK BOLT WITH HIS KNEE CAP.
ISOLATED UNINTENTIONAL ROOF FALL 40'LONG X 3'THICK.3'CONV BOLTS BEING USED.WORKING SECTION HAS BEEN MOVED TO MAINS 12 BRKS FROM FALL AREA.
VICTIM WAS STRU7K BY BOOM OF CONTINUOUS MINER MACHINE MACHINE WAS BACKING UP AT TIME OF ACCIDENT.
VICTIM WAS SITT3NG IN OPERATOR COMPARTMENT OF SHUTTLE CAR WHEN CONTINOUS MINER WAS LOADING SHUTTLE CAR. PIECE OF ROCK WAS LOADED FROM MINER BOOM AND STRUCK VICTIM ON LEFT EAR.
USING CUTTING T2RCH REMOVING CAP WIRES FROM PADDLE OF PADDLE WHEEL WASHER.TORCH CAME IN CONTACT WITH LIVE CAP WHICH EXPLODED.
VICTIM WAS OPER5TING ROOF BOLTER WHEN SMALL ROCK FELL FROM ROOF STRIKING LEFT HAND
USING CUTTING T2RCH SMALL PIECE OF METAL FLEW IN EYE.
ROOF BOLTER OPE9ATOR WAS BOLTING TOP IN TRACK ENTRY WHEN PIECE OF DRAW ROCK FELL FROM BETWEEN BOLTS STRIKING LEFT FOOT.2 FRACTURED TOES AND LACERATION ON IT FOOT.
VICTIM SLIPPED 2N CATWALK AT WASH PLANT AND FELL ON CATWALK.
2ND & 3RD RIGHT8 WERE BEING PILLARED WHEN A MASSIVE PILLAR FALL OCCURRED. WE HAVE RETREATED FROM THE AREA AND NEW PROJECTIONS SUBMITTED TO MSHA . RECOVERY WORK OF EQUIP. WAS PERFORMED IN THI . S AREA. EQUIP R9COVERED - LEE NORSE 300 CM, 2-JOY 21SC'S, 1 JOY 16 SC, 1-ROSCO II BELT FEEDER BY LONG AIRDOX
VICTIM WAS STAN8ING BEHIND ROOF BOLTING MACHINE. AS IT AS TRAMMED BACKWARD THE BUMPER OF THE ROOF BOLTER STRUCK LEFT FOOT OF VICTIM.
VICTIM WAS PULL3NG A POWER BOX WITH A SCOOP, THE TWO WERE CONNECTED BY A PULL ROPE. WHEN THE POWER BOX BECAME FOULED AGAINST THE RIB THE BOLT CONNECTING THE PULL CABLE TO THE POWER BOX CAME L LOOSE STRIKING 5ICTIM. THE VICTIM WAS TRAMMING THE SCOOP AT TIME OF ACIDENT
EMPL CARRYING 235-GAL CANS OF HYDRAULIC OIL COMPLAINED OF BACK PAIN.
VICTIM WAS ATTE4PTING TO LIFT BUG DUSTER TRANSMISSION ONTO CUTTING MACHINE WHEN HE COMPLAINED OF BACK PAIN.
WORKING ON BUGGY FLIGHT SOMEHOW BUGGY WENT TO GROUND CAUSING ELECTRIC SHOCK.
MASHED FINGER PUTTING V-BELT ON FEEDER