Black Oak #8 Coal

CAR DRIVER HIT HOLE IN ROADWAY WHILE TRAMMING S.CAR. TWISTED BACK.

THE CONTINUOUS MINER HAD MOVED ACROSS SECTION.HE WAS PULLING MINER CABLE OUT OF ROADWAY WHEN HE HAD A SHARP PAIN UNDER RIB CAGE ON LEFT SIDE.

INJURED PERSON WAS LIFTING BOLTS & PLATES WHEN HE FELT A PAION IN HIS BACK

HE WAS TRYING TO CLEAN THE CONTINUOUS MIENR CONVEYOR WHIHC WAS FOULED WITH ROCK. AND HE HIT HIS RIGHT INDEX FINGER, WITH A SLEDGE HAMMER.

SHOVELING BELT HIT TOP OF RF BOLT KNEE HIT SHARP ROCK

RAIL RUNNER BUMPED INTO ANOTHER RAIL RUNNER, CAUSING THE OPERATOR TO HIT HIS KNEE AGAINST THE FRAME OF THE RAIL RUNNER.

SHOVELING BELTLINE,SHOVEL GOT CAUGHT BETWEEN ROLLERS AND CONVEYOR BELT.REACTION CAUSED SHOVEL TO THRUST UPWARD PLACING INJ PERSON ARM IN STRAIN.

INJURED PERSON WAS PICKING UP A BOX OF RESIN ROOF BOLT GLUE & HE FELT A PAIN OR GIVING AWAY OF HIS LOWER BACK LUMBAR SECTION

INJURED PERSON WAS PULLING ON VENTILATION CURTAIN & SLIPPED & INJURED BACK.

UNLOADING SHUTTLE TIRE FELT PAIN IN LOWER BACK

WHILE TAKING OUT HEADDRIVE A ROLLER STRUCK ON LEFT FOOT.

INJURED PERSON WAS PUTTY UP A ROOF BOLT WHEN HE TWISTED HIS RIGHT KNEE.

PULLING MINER CABLE WHEN HIS RIGHT SHOULDER STARTED HURTING.

THE ROOF FALL OCCURRED ON 002 SECTION, 2 CROSS CUTS OUTBY FACE IN #7 ENTRY. THE ROOF FALL WAS APPROX. 50' X 20' X 6' BOLTED WITH 5 FT. RESIN BOLTS (SUPPLEMENTED BY 6' REBARS). SPAD LOCATION 11 14 2 BREAKS INBY. 1 BREAK OUTBY 1160. THIS AREA CRIBBED OFF.

A ROOF FALL OCCURRED IN OLD #1, ON EAST MAINS. THE MEASUREMENTS WHERE 50' LONG X 3' TO 6' THICK X 20' WIDE. THE FALL WAS 2 BREAKS OUTBY SPAD 099 IN #6 ENTRY (RETURN). THE AREA WAS SUPPORTED BY 36" RESIN BOLTS.

RF FALL OCC AT SPAD NO 814, SEVERAL X CUTS OUTBY, 001, IN RETURN AIR COURSE, OLD MAIN LINE ENTRY 20W 30L 6 TO 8 H

ROOF FALL OCCURED IN OLD WORKS OFF OF 001 SECITON. FALL WAS APPROX 150'X20'X3 TO 8' THICK INBY SPAD NO 1@@@05.

THE FALL OCCURRED IN THE NO#1, 2, & 3 ENTRY 1 BREAK INBY SPAD #114. THE FALL MEASURES 140 LONG, 20 FT WIDE AND 5 FT THICK.

INJURED WAS WORKING ON HEAD DRIVE BULL GEAR FELL ON HIS RIGHT FOOT.

INJURED WAS CHANGING A SCOOP TIRE WHEN HE PULLED A MUSCLE IN HIS LOWER BACK.

INJ STRUCK IN RIGHT KNEE WITH S/C CABLE AS REEL WAS TAKEN UP.

THE FALL OCCURRED IN THE #1,2,3,4,5 ENTRIES, 1 X-CUT INBY 161 SPAD. THE FALL MEASURES 250 FT LONG, 10 FT THICK, 18 FT WIDE.

INJURED WAS WORKING BOLTING TOP. HE WAS WALKING AROUND PINNER WHEN HE TWISTED HIS KNEE.

INJURED WAS RIDING SCOOP BUCKET TO THE DSECTION WHEN HIS FOOT SLIPPED OUT OF THE SCOOP BUCKET AND BECAME CAUGHT BETWEEN BUCKET AND BOTTOM INJURING LEFT FOOT.

INJURED WAS BOLTING TOP WHEN HE WAS MOVING INTOO POSITION TO SWING HEAD HE TWISTED HIS KNEE

INJURED WAS LOADING BOXES OF RAVSIN GLUE ON BOLTING MACHINE WHEN HE SLIPPED ON SLICK BOTTOM CAUSING PAIN IN LOWER BACK.

INJ LIFTING CABLE WHEN HE FELT PAIN IN LOWER BACK.

OCC IN 1 ENTRY AT SPAD 496 IN 5 PANEL IN LAST OPERN X CUT THE FALL MEASURES 18 FT W 20 FT L AND 10 TO 15 FT T.

FALL OCCURRED IN #1 ENTRY AT SPAD #637 IN #4 PANEL IN LAST OPEN BREAK IN PANEL FALL MEASURES 20' WIDEX5 TO 10' THICK X20' LONG IT IS CONTINUATION OF OLD FALL..

TWO BATTERY OPERATED RAILRUNNERS RUN TOGETHER. HE SUSTAINED BRUISE ON LEFT LEG.

TOP WET WITH CONDENSATION CAUSING SCALE ROCK TO FALL BETWEEN BOLTS SMALL PIECE HIT EE ABOVE LEFT EYE AND CUT SKIN 5 STITCHES TO SEW UP.

THE FALL OCCURRED IN THE #3 ENTRY AND THROUGH THE #4 ENTRY TO THE #5 ENTRY THE FALL 75 FEET LONG, 20 FEET WIDE, AND 6 FEET THICK.

FALL OCCURRED #7 ENTRY 1 BRK INBY SPAD #119 FALL MEASURES 28'LONG X 19'WIDE X 7'HIGH.

FALL OCC 1 X CUT INBY SPAD 189 1700 FT OUTBY 001 S ECTION 27 L 6 - 7 FT THICK 19FT W. IS IN THE 4 ENTRY IN AN INTERSECTION

INJURED LOADED BELT STRUCTURE AND AFTER LOADING THE MATERIAL OPERATED THE SCOOP FOR A SHORT PERIOD OF TIME.WHEN HE GOT OUT OF THE SCOOP HIS ABCK WAS HURTING HE ASSUMED HE INJURED HIS ABCK WHEN LOADING THE BELT STRUCTURE PRIOR TO OPERATING THE SCOOP.

THE FALL OCCURRED IN THE STRAIGHT OF THE OLD MAIN LINE HEADINGS AT SPAD NO. 99 IN THE #6 ENTRY APPROX. - 45'X19'X12" HEIGHT

PICKING UP ROOF BOLT PLATE FORM MINE FLOOR ROOF DRILL TIRE CAUGHT HAND BETWEEN TIRE AND MINE FLOOR.

EMPL INSTALLING ROOF BOLTS,STEEL HUNG IN HOLE.IT FELL WITHOUT WARNING STRIKING EMPL ON RING AND MIDDLE FINGER.

THE FALL OCCURRED IN THE ROOMS LEFT HANDED WHICH WAS NOT BEING WORKED OFF THE 002 SECTION IN #3 LEFT OFF OF #1 LEFT 35' X 14 X 48" HIGH 180' INBY SPAD 310.

EMPLOYEE LOADED ROOF DRILL PLATES AND BOLTS ON TOP OF ROOF DRILL,WHEN TRAMMING THE ROOF DRILL ACROSS THE SECTION THE PLATES CONTACTED THE MIONE ROOF THEREFORE DRAGGING THEM OFF AND ONTO THE EM PLOYEES ARM.

EMPL OYEE WAS UNLOADING ROOF BOLTS AND PLATES IN THE #3 ENTRY FROM A SCOOP BUCKET.THE SHUTTLE CAR OPERATOR TURNED THE CORNER AND CAME DOWN THE WRONG ENTRY THEREFORE STRIKING THE INJURED WITH THE DUMPING END OF THE SHUTTLE CAR.

EMPLOYEE WAS PUSHING A ROOF BOLT INTO THE HOLE WITH THR OOF DRILL HEAD.WHEN HIS HAND BECAME CAUGHT BETWEEN THE MINE ROOF AND HEAD OF THE DRILL.

EMPL PUSHING ROOF BOLT INTO HOLE WITH DRILL HEAD.ROOF BOLT BENT MASHING EMPL RIGHT HAND AND FINGERS.

EMPLOYEE WAS PULLING A MINE RAIL AND EXPERIENCED PAIN IN THE LEFT SHOULDER AREA.

EMPLOYEE DROPPED A CONCRETE BLOCK ON HIS LITTLE FINGER.