Email me when a new MSHA incident is filed at #13.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2000 Q1 | 0 | 0 | 0 |
BOTTOM DAMP,ROOF SMOOTH RIB LOOSE CAUSED INJURIES.
PLACED HAND ON ROOF BOLTER ARM TO RAISE UP, DRAWSLATE STRUCK LEFT HAND.
ROOF FALL IN #2 LEFT 80FT INBY 55# 5330 AT INNERSECTION FELL ON BACK END OF CUTTING MACHINE. FALL WAS APP. 7 FT THICK BY 14 FT WIDE AND 24 FT LONG. FALL WAS AT A MOUNTAIN SEAM.
CUTTER OPERATOR WAS BRINGING LOOSE COAL. ROCK FROM RIGHT SIDE OF RIB IN #4 HEADING WHEN MATERIAL DOWN & SLATE BAR WAS KNOCKED OUT OF HAND & STRUCK HIM ON TOP OF RIGHT FOOT.
HAULING COAL WITH SCOOP, TRAVELED THRU CHECK CURTAIN MADE OF BELT STRIPS. BELT STRIP DRUG ACROSS HEAD AND SPRAINED NECK.
ROOF FALL IN #1 HEADING 1,400FT OUTBY WORKING SECTION FALL WAS 50 FT LONG, 16 FT WIDE, 6 FT THICK, AND LOCATED AT SS#7769.
CLEANING AROUND DODGE COUPLING AND GUARD KICKED OFF. FRACTURE LEFT ARM ABOVE WRIST, CUT SMALL PLACE ON LEFT LEG.
BENT OVER TO PICK UP BOX CLAY AND PULLED MUSCLE IN RIGHT HIP.
ROOF FALL IN #2 HEADING (MAINS) AT SPAD # R788 WAS APP 24FT LONG 15 FT WIDE 2-7 FT THICK. FALL WAS DISCOVERED ON A REOPENING INSPECTION ON 3-29-95 BY MSHA AND OPERATOR.
ROOF FALL IN #4 HEADING (MAINS) AT SPAD # W246 WAS APP. 16 FT LONG, 18 FT WIDE 0-6 FT THICK. FALL WAS DISCOVERED ON A REOPENING INSPECTION ON 3-29-95 BY MSHA AND OPERATOR.
ROOF FALL IN #4 HEADING 15 FT OUT BY SPAD # R803WAS APP. 30 FT LONG, 14 FT WIDE, 0-8 FT THICK. FALL WAS DISCOVERED ON A REOPENING INSPECTION ON 3-29-95 BY MSHA AND OPERATOR.
ROOF FALL IN #1 HEADING (MAINS) 80 FT INBY SPAD #624 WAS APP. 30 FT LONG, 16 FT WIDE 2-6 FT THICK. FALL WAS DISCOVERED ON A REOPENING INSPECTION ON 3-29-95 BY MSHA AND OPERATOR.
REPLACING WHEEL UNIT ON 21SC MUST HAVE STRAINED BACK IN PROCESS
IMPROPER LIFTING.
SUBJECT WAS PULLING BELT TO LOAD ON CAR FOR REMOVAL WHEN HE LOST HIS FOOTING, FALLING BACKWARDS STRIKING A BELT HANGER ON SIDE OF HEAD; RECEIVED A CUT ABOVE AND TO EAR. REQUIRED STICHES. HE RE TURNED TO WORK ON NEXT SHIFT. NO LOST TIME.
FALL OCCURED WHILE CUTTING A BLOCK.
LOAD DUST IN SCOOP BUCKET BY HAND.
INJURED WAS RETRIEVING A BARREL OF OIL FOR SERVICING.
REPORTABLE ROCK FALL ABOVE ANCHORAGE BUT NO ONE HURT PINNER COVERED UP.
INJURED WAS MOVING PINNER AND GOT IT ON HIS FOOT.
I NAME WAS MOVING & UNLOADING A 5HP PUMP TO RESET IT IN ANOTHER LOCATION
DAMP BOTTOM SMOOTH TOP LOOSE RIB CAUSED INJURIES.
ROCK FELL OUT BETWEEN THE ROOF BOLTS STRIKING MINER OPERATOR ON THE ARM.
CABLE REEL FOULED UP, AND HE STARTED MOVING CABLE TO MOVE BUGGY OUT OF WAY. THE BUGGY WAS COMING AROUND THE CORNER IN MUD, AND THE BUGGY BUMPED INTO HIM.
THE EVENING CRE4 DISCOVERED A FIRE AT THE 001 SECTION DUMPING POINT. THE FIRE BURNED APPROX. 295 HOURS. THE FIRE OCCURRED WHEN A TAIL ROLLER BEARING OVERHEATED IGINITED SOME FINE COAL AROUND THE TAIL ROLLE9.
WE HAD A ROCK FALL IN #4 ENTRY THAT WAS BELT ENTRY 7 BREAKS OUTBY THE FACE THE FALL WAS ABOUT 7 FT THICK 18 FT WIDE 40 TO 50 FT LONG.
HE WAS BOLTING THE TOP WHEN A PC OF DRILL STEEL FELL ON HIS LEVER & THE MACHINE CAUGHT HIS LEG AGAINST THE RIB
THERE WERE TWO MOUNTAIN CRACKS RUNNING AT AN ANGLE IN A INTERSECTION WHEN THE BREAK WAS CUT INTO INTERSECTION THE CRACKS RAN TOGETHER COULD NOT GET IT SUPPORTED SO THE ROCK SLIPPED OUT THE ROC K WAS ABOUT 6\W X 10\L X 3 TO4\W