Mining Incidents
Abandoned mine inventory

Abandoned mines in Nebraska

Nebraska has 1,941 mine and prospect features on USGS topographic maps published 1915–1994, including 1 mine openings (shafts, adits and air shafts), across 85 counties. MSHA's register carries 607 Nebraska mines with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps of Nebraska, every OSMRE abandoned mine land problem, and every MSHA-registered mine with status Abandoned, by county. Each county page lists the named features and links every MSHA mine to its own record.

Mapped mine features (USGS)
1,941
Mine openings
1
OSMRE problems unreclaimed
0
MSHA mines marked abandoned
607
85 counties with mapped features6 features carry a name0 prospect pitsmaps published 1915–1994 0 MSHA mines abandoned and sealed
By countyranked by mapped USGS features
County USGS features Openings OSMRE problems MSHA abandoned
Cass County
172 0 0 21
Cheyenne County
95 0 0 4
Hall County
81 0 0 26
Cedar County
70 0 0 17
Knox County
67 0 0 22
Buffalo County
60 0 0 20
Nemaha County
58 0 0 3
Scotts Bluff County
54 0 0 29
Lincoln County
49 0 0 36
Kimball County
47 0 0 3
Lancaster County
45 0 0 4
Sioux County
42 0 0 1
Richardson County
40 0 0 3
Holt County
39 0 0 21
Dawes County
36 0 0 5
Chase County
36 0 0 3
Dawson County
35 0 0 18
Gage County
35 0 0 15
Sarpy County
31 0 0 11
Jefferson County
30 0 0 9
Douglas County
29 0 0 19
Cherry County
28 0 0 2
Thayer County
26 0 0 6
Saunders County
25 0 0 9
Nuckolls County
25 0 0 4
Brown County
24 0 0 11
Otoe County
24 0 0 0
Red Willow County
23 0 0 13
Morrill County
22 0 0 18
Sheridan County
22 0 0 7
Cuming County
21 0 0 5
Banner County
21 0 0 0
Merrick County
20 0 0 9
Webster County
20 0 0 5
Custer County
20 0 0 4
Madison County
19 0 0 17
Antelope County
19 0 0 6
Pierce County
19 0 0 4
Garden County
19 0 0 1
Dixon County
18 0 0 6
Keith County
18 0 0 6
Saline County
18 0 0 6
Deuel County
17 0 0 7
Franklin County
17 0 0 7
Butler County
16 0 0 6
Pawnee County
16 0 0 4
Adams County
15 0 0 5
Furnas County
14 0 0 6
Stanton County
14 0 0 5
Platte County
13 0 0 15
Loup County
12 0 0 7
Perkins County
12 0 0 4
Seward County
12 0 0 1
York County
10 0 0 8
Hitchcock County
10 0 0 7
Boyd County
10 0 0 2
Thurston County
10 0 0 0
Colfax County
9 0 0 7
Rock County
9 0 0 2
Keya Paha County
9 0 0 1
Dodge County
8 0 0 8
Phelps County
8 0 0 3
Dakota County
8 0 0 2
Dundy County
8 0 0 2
Kearney County
7 0 0 5
Hamilton County
7 0 0 3
Polk County
6 0 0 8
Washington County
6 0 0 3
Thomas County
5 0 0 7
Frontier County
5 0 0 1
Howard County
4 0 0 11
Clay County
4 0 0 2
Harlan County
4 0 0 2
Hayes County
4 0 0 2
Fillmore County
4 0 0 1
Blaine County
4 0 0 0
Box Butte County
4 0 0 0
Johnson County
4 0 0 0
Hooker County
3 0 0 2
Burt County
3 0 0 0
Boone County
2 0 0 5
Nance County
2 0 0 5
Valley County
2 0 0 5
Greeley County
1 1 0 3
Logan County
1 0 0 0
Garfield County
0 0 0 4
What the features are
  1. Mine openings
    shafts, adits, air shafts, portals and vertical openings: the ways into underground workings
    1 0.1%
  2. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    171 8.8%
  3. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    1,766 91.0%
  4. Dumps, tailings, spoil and gob
    what mining left above ground
    3 0.2%
By source vocabularythe publishers' own terms
Feature type Features
Gravel Pit 790
Gravel Pit 266
Quarry 251
Sand Pit 168
Sand Pit 96
Disturbed Surface 78
Gravel/Borrow Pit - Undifferentiated 52
Clay Pit 50
Disturbed Surface - Pit 48
Quarry 46
Clay Pit 34
Open Pit Mine or Quarry 30
Open Pit Mine or Quarry 14
Gravel/Borrow Pit - Undifferentiated 4
Borrow Pit 3
Shale Pit 3
Mine Dump 2
Sand and Gravel Pit 2
Quarry - Rock 1
Tailings - Pond 1
Adit 1
Silica Mine 1
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine, and several problems make one problem area (PAD), which is the unit a state program counts and reports; the public extract can also hold more problem areas than a state's live inventory, because areas since merged or ruled ineligible stay in the published file, so a state figure that differs from this one is not a contradiction. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s; that is a regulatory status rather than a physical one, and it also holds operations merely between jobs, portable crushers above all, which is why over a thousand mines carrying it have been inspected in the last two years. The three overlap and are never added together. Counties are assigned from each feature's coordinates against the Census 2023 county boundaries. The full method and every source are on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.