Mining Incidents
Abandoned mine inventory

Abandoned mines in New Jersey

New Jersey has 2,379 mine and prospect features on USGS topographic maps published 1891–1995, including 8 mine openings (shafts, adits and air shafts), across 20 counties. MSHA's register carries 178 New Jersey mines with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps of New Jersey, every OSMRE abandoned mine land problem, and every MSHA-registered mine with status Abandoned, by county. Each county page lists the named features and links every MSHA mine to its own record.

Mapped mine features (USGS)
2,379
Mine openings
8
OSMRE problems unreclaimed
0
MSHA mines marked abandoned
178
20 counties with mapped features32 features carry a name0 prospect pitsmaps published 1891–1995 0 MSHA mines abandoned and sealed The state program's own inventory estimate: 431 sites (IMCC-NAAMLP Hardrock AML Report 2025, Table 5, page 46).
By countyranked by mapped USGS features
County USGS features Openings OSMRE problems MSHA abandoned
Cumberland County
320 0 0 11
Ocean County
279 0 0 16
Monmouth County
273 0 0 8
Burlington County
218 0 0 6
Middlesex County
187 0 0 13
Atlantic County
181 0 0 8
Gloucester County
156 0 0 9
Camden County
139 0 0 11
Morris County
117 0 0 10
Cape May County
93 0 0 8
Sussex County
81 1 0 34
Salem County
80 0 0 3
Warren County
64 7 0 12
Mercer County
58 0 0 3
Passaic County
43 0 0 9
Somerset County
34 0 0 7
Hunterdon County
25 0 0 3
Bergen County
15 0 0 2
Essex County
10 0 0 3
Union County
6 0 0 2
What the features are
  1. Mine openings
    shafts, adits, air shafts, portals and vertical openings: the ways into underground workings
    8 0.3%
  2. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    1,303 54.8%
  3. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    1,066 44.8%
  4. Dumps, tailings, spoil and gob
    what mining left above ground
    2 0.1%
By source vocabularythe publishers' own terms
Feature type Features
Open Pit Mine or Quarry 609
Disturbed Surface 489
Gravel Pit 307
Gravel Pit 283
Gravel/Borrow Pit - Undifferentiated 179
Open Pit Mine or Quarry 164
Sand Pit 57
Borrow Pit 37
Gravel/Borrow Pit - Undifferentiated 33
Quarry 28
Quarry 27
Sand Pit 26
Clay Pit 23
Borrow Pit 19
Clay Pit 18
Mine 17
Sand and Gravel Pit 14
Open Pit Mine 14
Sand and Gravel Pit 13
Adit 6
Open Pit Mine 5
Disturbed Surface - Pit 4
Mine Shaft 2
Tailings - Pond 1
Mine 1
Tailings - Undifferentiated 1
Quarry - Rock 1
Marl Pit 1
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine, and several problems make one problem area (PAD), which is the unit a state program counts and reports; the public extract can also hold more problem areas than a state's live inventory, because areas since merged or ruled ineligible stay in the published file, so a state figure that differs from this one is not a contradiction. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s; that is a regulatory status rather than a physical one, and it also holds operations merely between jobs, portable crushers above all, which is why over a thousand mines carrying it have been inspected in the last two years. The three overlap and are never added together. Counties are assigned from each feature's coordinates against the Census 2023 county boundaries. The full method and every source are on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.