Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
Countries
Peru Chile
English Español
Abandoned mines › New Jersey
Abandoned mine inventory

Abandoned mines in Warren County, New Jersey

Warren County, New Jersey has 64 mine and prospect features on USGS topographic maps published 1954–1994, including 7 mine openings (shafts, adits and air shafts); 1 of the features carry a name on the map. MSHA's register carries 12 mines in the county with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps covering Warren County, every OSMRE abandoned mine land problem in the county, and every MSHA-registered mine here with status Abandoned. Named features are listed below; unnamed ones are counted by type. Locations are deliberately not shown: this page says what abandoned workings are in the county, not where to find them. They are dangerous and should not be entered.

Mapped mine features (USGS)
64
Mine openings
7
OSMRE problems unreclaimed
0
MSHA mines marked abandoned
12
1 features carry a name0 prospect pits9 quadrangle maps, published 1954–1994 0 MSHA mines abandoned and sealed
What the features are
  1. Mine openings
    shafts, adits, air shafts, portals and vertical openings: the ways into underground workings
    7 10.9%
  2. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    15 23.4%
  3. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    42 65.6%
Named features on the maps1 named · from the USGS compilation
Name on map Feature
Kishpaugh Mines Mine Shaft

A name is the label printed beside the symbol on the map. "First mapped" is the earliest topographic edition that shows the symbol, which bounds the feature's age from above; it is not the date it was worked. Unnamed features (most prospect pits, adits and shafts carry no label) are in the counts above but not this list.

MSHA-registered mines with status Abandoned12 on register
  1. BILL GRIFFETT SAND & GRAVEL
    Surface metal/non-metal · Bill Griffett Sand & Gravel · MSHA ID 2800999
    Abandoned
  2. Carpentersville Plant
    Surface metal/non-metal · Birdsboro Slag Products Company Inc · MSHA ID 2800971
    Abandoned
  3. Commercial Care Inc
    Surface metal/non-metal · Commercial Care Inc · MSHA ID 2800964
    Abandoned
  4. Hutchinson Pit
    Surface metal/non-metal · Hutchinson Sand & Gravel · MSHA ID 2800947
    Abandoned
  5. Partiac Peat Company Pit
    Surface metal/non-metal · Kelsey Humus Company · MSHA ID 2800416
    Abandoned
  6. Perrucci Quarry And Mill
    Surface metal/non-metal · Perrucci Contracting Company Inc · MSHA ID 2800023
    Abandoned
  7. R H Materials Company Incorporated
    Surface metal/non-metal · R H Materials Company Inc · MSHA ID 2800958
    Abandoned
  8. S R U
    Surface metal/non-metal · S R U Trucking · MSHA ID 2801001
    Abandoned
  9. Schafer'S Pit
    Surface metal/non-metal · Penn Jersey Paving Materials Inc · MSHA ID 2800992
    Abandoned
  10. Steckel Concrete Company Incorporated
    Surface metal/non-metal · Steckel Concrete Company Inc · MSHA ID 2800554
    Abandoned
  11. Trans Mix Sand & Gravel Incorporated
    Surface metal/non-metal · Trans Mix Sand & Gravel Inc · MSHA ID 2800780
    Abandoned
  12. Wulff Enterprises
    Surface metal/non-metal · Wulff Enterprises · MSHA ID 2800977
    Abandoned

Status and date are as reported to MSHA by the operator. Each mine's own page carries its accident, citation and inspection record.

By source vocabularythe publishers' own terms
Feature type Features
Gravel Pit 23
Disturbed Surface 7
Gravel Pit 7
Adit 5
Open Pit Mine or Quarry 4
Gravel/Borrow Pit - Undifferentiated 4
Quarry 3
Gravel/Borrow Pit - Undifferentiated 3
Open Pit Mine or Quarry 3
Quarry 2
Mine Shaft 2
Mine 1
Other counties in New JerseyAll counties →
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened as a working mine, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s. The three overlap and are never added together. The county is assigned from each feature's coordinates against the Census 2023 county boundaries. The full method is on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.