Mining Incidents
Abandoned mine inventory

Abandoned mines in Lehigh County, Pennsylvania

Lehigh County, Pennsylvania has 147 mine and prospect features on USGS topographic maps published 1902–1999, including 47 mine openings (shafts, adits and air shafts); 1 of the features carry a name on the map. MSHA's register carries 12 mines in the county with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps covering Lehigh County, every OSMRE abandoned mine land problem in the county, and every MSHA-registered mine here with status Abandoned. Named features are listed below; unnamed ones are counted by type. Locations are deliberately not shown: this page says what abandoned workings are in the county, not where to find them. They are dangerous and should not be entered.

Mapped mine features (USGS)
147
Mine openings
47
OSMRE problems unreclaimed
0
MSHA mines marked abandoned
12
1 features carry a name0 prospect pits16 quadrangle maps, published 1902–1999 0 MSHA mines abandoned and sealed
What the features are
  1. Mine openings
    shafts, adits, air shafts, portals and vertical openings: the ways into underground workings
    47 32.0%
  2. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    16 10.9%
  3. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    84 57.1%
Named features on the maps1 named · from the USGS compilation
Name on map Feature
Consolidated Quarries Quarry

A name is the label printed beside the symbol on the map. "First mapped" is the earliest topographic edition that shows the symbol, which bounds the feature's age from above; it is not the date it was worked. Unnamed features (most prospect pits, adits and shafts carry no label) are in the counts above but not this list.

MSHA-registered mines with status Abandoned12 on register
  1. A B E Materials (Allentown)
    Surface metal/non-metal · A B E Materials · MSHA ID 3600122
    Abandoned
  2. Bethlehem Plant
    Facility metal/non-metal · Asbury Graphite Mills Inc · MSHA ID 3606923
    Abandoned
  3. Coopersburg Granite Mill
    Surface metal/non-metal · Coopersburg Granite Co · MSHA ID 3600050
    Abandoned
  4. COPLAY AGGREGATES, INC.
    Surface metal/non-metal · Core Construction & Remediation Inc · MSHA ID 3608219
    Abandoned
  5. Friedensville Lime Plant #142
    Facility metal/non-metal · Eastern Industries Inc · MSHA ID 3602627
    Abandoned
  6. Jericho Mt. Quarry
    Surface metal/non-metal · Delaware Valley Landscape Stone Inc. · MSHA ID 3609014
    Abandoned
  7. Lehigh Quarry #117
    Surface metal/non-metal · Eastern Industries Inc · MSHA ID 3600134
    Abandoned
  8. Mellott-LT006
    Facility metal/non-metal · Mellott Company · MSHA ID 3609420
    Abandoned
  9. No 1 Strip Mine
    Surface coal · Steam Systems Sales & Service Inc · MSHA ID 4604488
    Abandoned
  10. Pennsylvania Perlite Corporation
    Facility metal/non-metal · Pennsylvania Perlite Corp · MSHA ID 3607068
    Abandoned
  11. Slatedale Aggregate Materials Inc
    Surface metal/non-metal · Slatedale Aggregate Materials Inc · MSHA ID 3609282
    Abandoned
  12. Whitehall Quarry #113
    Surface metal/non-metal · Eastern Industries Inc. · MSHA ID 3600067
    Abandoned

Status and date are as reported to MSHA by the operator. Each mine's own page carries its accident, citation and inspection record.

By source vocabularythe publishers' own terms
Feature type Features
Mine Shaft 47
Quarry 37
Quarry 32
Gravel Pit 8
Disturbed Surface 6
Open Pit Mine or Quarry 5
Gravel/Borrow Pit - Undifferentiated 4
Open Pit Mine or Quarry 3
Disturbed Surface - Pit 2
Gravel Pit 2
Sand Pit 1
Other counties in PennsylvaniaAll counties →
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened as a working mine, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s. The three overlap and are never added together. The county is assigned from each feature's coordinates against the Census 2023 county boundaries. The full method is on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.