Mining Incidents
Abandoned mine inventory

Abandoned mines in Tennessee

Tennessee has 6,948 mine and prospect features on USGS topographic maps published 1903–2003, including 722 mine openings (shafts, adits and air shafts), across 94 counties. OSMRE's abandoned mine land inventory lists 1,327 problems in the state, 883 of them not yet reclaimed. MSHA's register carries 1,968 Tennessee mines with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps of Tennessee, every OSMRE abandoned mine land problem, and every MSHA-registered mine with status Abandoned, by county. Each county page lists the named features and links every MSHA mine to its own record.

Mapped mine features (USGS)
6,948
Mine openings
722
OSMRE problems unreclaimed
883
MSHA mines marked abandoned
1,968
94 counties with mapped features166 features carry a name19 prospect pitsmaps published 1903–2003 1,327 OSMRE problems, 444 reclaimed292 problem areas (PADs), 240 with work left 307 MSHA mines abandoned and sealed The state program's own inventory estimate: 190 sites (IMCC-NAAMLP Hardrock AML Report 2025, Table 5, page 46).
By countyranked by mapped USGS features
County USGS features Openings OSMRE problems MSHA abandoned
Campbell County
626 140 302 363
Scott County
471 55 153 190
Marion County
409 149 70 122
Maury County
382 11 0 22
Anderson County
360 44 101 182
Cumberland County
349 3 22 111
Morgan County
348 48 107 98
Hamilton County
277 30 49 22
Sequatchie County
168 14 57 97
Shelby County
160 0 0 20
Grundy County
149 3 125 49
Hardin County
142 0 0 10
Claiborne County
129 20 57 110
Fentress County
125 42 52 63
Van Buren County
122 42 93 27
Bledsoe County
113 8 46 97
Knox County
111 2 0 22
Hickman County
111 3 0 3
Lawrence County
94 0 0 0
Benton County
92 0 0 16
Lewis County
91 1 0 1
Henry County
89 0 0 9
Rhea County
84 13 13 24
Giles County
78 0 0 8
Overton County
74 10 43 13
Sullivan County
72 0 0 7
Decatur County
64 0 0 7
White County
60 19 17 11
Wayne County
60 0 0 2
Blount County
57 0 0 7
Williamson County
54 5 0 10
McNairy County
51 0 0 4
Franklin County
49 2 0 6
Roane County
48 3 4 7
Carter County
47 0 0 1
Polk County
46 24 0 13
Monroe County
45 0 0 3
Davidson County
44 0 0 15
McMinn County
43 0 0 6
Loudon County
43 0 0 4
Johnson County
43 0 0 2
Perry County
41 1 0 4
Putnam County
40 3 8 9
Jefferson County
40 6 0 16
Marshall County
37 0 0 3
Weakley County
36 0 0 8
Stewart County
35 0 0 1
Hawkins County
34 0 0 1
Obion County
29 0 0 10
Dyer County
28 0 0 4
Greene County
27 0 0 7
Washington County
27 0 0 5
Bedford County
27 0 0 0
Lake County
27 0 0 0
Fayette County
26 0 0 4
Montgomery County
26 0 0 2
Lauderdale County
24 0 0 4
Rutherford County
23 2 0 6
Cocke County
23 0 0 5
Madison County
22 0 0 4
Bradley County
22 0 0 2
Meigs County
21 1 0 2
Tipton County
19 0 0 12
Unicoi County
19 0 0 1
Carroll County
18 0 0 5
Coffee County
17 2 2 4
Wilson County
17 0 0 4
Dickson County
17 5 0 0
Grainger County
16 1 0 11
Union County
16 0 0 8
Hardeman County
16 0 0 3
Hancock County
16 0 0 2
Lincoln County
16 0 0 2
Sumner County
15 0 0 2
Sevier County
14 0 0 1
Hamblen County
14 0 0 0
Pickett County
13 3 6 2
Humphreys County
13 3 0 3
Warren County
12 1 0 3
Gibson County
11 0 0 1
Macon County
11 2 0 1
DeKalb County
9 1 0 1
Moore County
8 0 0 1
Robertson County
7 0 0 2
Haywood County
7 0 0 0
Henderson County
7 0 0 0
Trousdale County
7 0 0 0
Smith County
5 0 0 10
Clay County
4 0 0 1
Cannon County
4 0 0 0
Cheatham County
2 0 0 4
Jackson County
1 0 0 2
Chester County
1 0 0 0
Houston County
1 0 0 0
Various Counties County
0 0 0 1
What the features are
  1. Mine openings
    shafts, adits, air shafts, portals and vertical openings: the ways into underground workings
    892 10.8%
  2. Prospect pits and trenches
    shallow exploration diggings that never became a mine
    19 0.2%
  3. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    5,210 63.0%
  4. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    799 9.7%
  5. Dumps, tailings, spoil and gob
    what mining left above ground
    487 5.9%
  6. Mills, tipples and facilities
    processing plants and hazardous structures
    56 0.7%
  7. Other reclamation problems
    highwalls, subsidence, polluted or clogged water, fires, slides and gases in OSMRE's inventory
    801 9.7%
  8. Other
    symbols outside the classes above
    11 0.1%
By source vocabularythe publishers' own terms
Feature type Features
Strip Mine 2,159
Open Pit Mine or Quarry 1,880
Adit 689
Disturbed Surface 410
Strip Mine 335
Open Pit Mine or Quarry 266
Gravel Pit 217
Quarry 195
P3 Spoil Area 191
P3 Pits 186
Quarry 152
Tailings - Pond 135
P2 Portals 133
P2 Dangerous Highwalls 123
Open Pit Mine 118
P3 Bench 104
P3 High Wall 77
P2 Hazardous Water Bodies 73
P2 Dangerous Piles & Embankments 61
Gravel Pit 55
P3 Haul Road 49
P3 Gobs 48
Borrow Pit 47
P2 Hazardous Equip & Facilities 38
Mine Shaft 33
P2 Polluted Water: Human Consumption 33
Open Pit Mine 32
Gravel/Borrow Pit - Undifferentiated 29
Clay Pit 29
Settling Pond 25
Sand Pit 24
P2 Vertical Openings 24
Prospect Pit 19
Clay Pit 18
P3 Water Problems 18
P2 Dangerous Slides 18
Tailings - Undifferentiated 17
P3 Mine Opening 17
P1 Dangerous Slides 16
P3 Equipment Facility 14
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine, and several problems make one problem area (PAD), which is the unit a state program counts and reports; the public extract can also hold more problem areas than a state's live inventory, because areas since merged or ruled ineligible stay in the published file, so a state figure that differs from this one is not a contradiction. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s; that is a regulatory status rather than a physical one, and it also holds operations merely between jobs, portable crushers above all, which is why over a thousand mines carrying it have been inspected in the last two years. The three overlap and are never added together. Counties are assigned from each feature's coordinates against the Census 2023 county boundaries. The full method and every source are on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.