Craig S Scoggin et al: 193 MSHA citations controller
MSHA controller ID: M09032
Watch this controller
Email me when a new MSHA incident is filed at any mine Craig S Scoggin et al controls.
- Fatalities
- 0
- Total incidents
- 3
- Mines on record
- 2
- Years on record
- 1992–1993
Compliance record
MSHA citations since 2000
193
citations
38
significant & substantial
$45,765
proposed penalties
$631
paid to date
1% of proposed penalties paid to date, a $45,134 gap.
Source: MSHA violations data, updated weekly.
Labor enforcement (WHD)
US Labor Department wage findings since 2009
1
labor cases
Source: US DOL Wage and Hour Division enforcement records, matched by employer name and state.
Inspection activity
MSHA inspections since 2000
71
inspections on record
1,028
inspection hours
18.8
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.193 citations across 1,028 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$46K
proposed penalties
$46K
current assessed
$631
paid to date
$45K
outstanding
179 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-07-28.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.20.5%
significant & substantial
37.3%
high negligence or reckless
20.0%
reasonably likely or greater
44.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 4.9% low, 57.8% moderate, 37.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2023-03-21, 3 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.6
samples
0
limit-tested
Most sampled contaminants
- Respirable dust, <.1mg6
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Top causes
- HANDLING OF MATERIALS 1 non-fatal
- POWERED HAULAGE 1 non-fatal
- SLIP OR FALL OF PERSON 1 non-fatal
Incident timeline
1993
1
1992
2
Operators under this controller
Mines on record
For insurers, brokers, and safety consultants
Where Craig S Scoggin et al stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.