EE WAS CLEANING UP (SHOVELING) AT #4 BELT HEAD. A PIECE OF ROCK FELL ON HIS BACK (18" X 24" X 2 1/2" THICK). (LOW COAL; EE MAY HAVE KNOCKED ROCK LOOSE WITH SHOVEL OR HIS BACK. BRUISED, POSSIBLY FRACTURED/CRACKED TAILBONE.)
#2: 282 MSHA citations Coal
#2 has $45K in proposed MSHA penalties and $42K outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at #2.
- Fatalities
- 0
- Total incidents
- 37
- Years on record
- 1992–2005
- Latest incident
- Aug 2005
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.#2 has $45K in proposed MSHA penalties and $42K outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.MSHA sampling at #2 shows 92% of 248 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2006-01-23, 20 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CUTTING MACHINE OPERATOR120
- SCOOP CAR OPERATOR31
- COAL DRILL OPERATOR22
Silica (quartz)
Last sampled: 2005-08-04, 21 years ago- CUTTING MACHINE OPERATOR10
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2004-10-20, 21 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- SCOOP CAR OPERATOR5
- COAL DRILL OPERATOR4
- CUTTING MACHINE OPERATOR4
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2006 | 0% | 1 |
| 2005 | 87% | 62 |
| 2004 | 97% | 59 |
| 2003 | 95% | 59 |
| 2002 | 91% | 55 |
| 2001 | 92% | 12 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2005 | 2.5 | 3 |
| 2004 | 2.0 | 3 |
| 2003 | 1.5 | 3 |
| 2001 | 2.0 | 1 |
| Year | over PEL | samples |
|---|---|---|
| 2004 | 0% | 10 |
| 2003 | 0% | 1 |
| 2002 | 0% | 5 |
| 2001 | 0% | 5 |
#2 recorded 14.62 reportable injury cases per 100 full-time workers in 2005.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2005 * | 14.62 | 14.62 | 0.000 |
| 2004 * | 6.01 | 6.01 | 0.000 |
| 2003 * | 0.00 | 0.00 | 0.000 |
| 2002 * | 6.40 | 0.00 | 0.000 |
- Cedar Grove Mining Inc 1992 to 1992
- Able Mining Corp 1992 to 1993
- Able Mining Corp 1993 to 1994
- Thunder Ridge Mining Inc 1994 to 2001
- Tristan Coal Company Inc 2001 to 2001
- N D O Coal Company Inc 2001 to 2003
- MRI Mining Incorporated 2003 to 2009
- New Birth Mining LLC 2009 to 2010
- Black Star Energy, Inc 2010 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2006 | 5 | 3,500 |
| 2005 | 14 | 59,256 |
| 2004 | 17 | 82,200 |
| 2003 | 14 | 71,254 |
| 2002 | 16 | 62,277 |
| 2001 | 13 | 7,030 |
#2 sits in Floyd County, Kentucky, where the Census mining category is 4.4% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2006 Q3 | 0 | 0 | 0 | |
| 2006 Q2 | 0 | 0 | 0 | |
| 2006 Q1 | 2,563 | 2 | 0 | 780.3 |
| 2005 Q4 | 5,623 | 27 | 17 | 4801.7 |
| 2005 Q3 | 6,412 | 15 | 6 | 2339.4 |
| 2005 Q2 | 7,391 | 8 | 5 | 1082.4 |
| 2005 Q1 | 7,937 | 22 | 11 | 2771.8 |
| 2004 Q4 | 7,373 | 16 | 7 | 2170.1 |
Show 13 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2004 Q3 | 8,744 | 15 | 9 | 1715.5 |
| 2004 Q2 | 7,782 | 17 | 8 | 2184.5 |
| 2004 Q1 | 9,380 | 34 | 17 | 3624.7 |
| 2003 Q4 | 6,462 | 15 | 5 | 2321.3 |
| 2003 Q3 | 7,778 | 15 | 7 | 1928.5 |
| 2003 Q2 | 7,666 | 23 | 8 | 3000.3 |
| 2003 Q1 | 3,648 | 11 | 5 | 3015.4 |
| 2002 Q4 | 7,746 | 10 | 6 | 1291.0 |
| 2002 Q3 | 6,984 | 3 | 0 | 429.6 |
| 2002 Q2 | 6,548 | 6 | 2 | 916.3 |
| 2002 Q1 | 9,955 | 11 | 4 | 1105.0 |
| 2001 Q4 | 7,056 | 14 | 3 | 1984.1 |
| 2001 Q3 | 1,000 | 10 | 1 | 10000.0 |
Reportable incidents
37 on file2005 · 2 incidents
Employee was operating scoop, got too close to rib, caught his ear on rib.
2004 · 1 incident
EE WAS STARTING TO CUT 2ND CUT WHEN A PIECE OF ROCK CAME OUT BETWEEN BOLTS.
2002 · 1 incident
COMING OUTSIDE ON SCOOP TO CHANGE BATTERY.
1996 · 1 incident
EE SMASHED INDEX FINGER ON LEFT HAND WHILE ROOF BOLTING.
1995 · 5 incidents
WHILE BENDING A BOLT TO USE IN ROOF BOLTING, EE PULLED MUSCLE IN BACK.
A PIECE OF DRAW ROCK FELL HITTING THE RIGHT SIDE OF EE'S BODY.
PULLING ON DOME ON CUTTER - SPRAINED BACK.
WHILE EMPLOYEE WAS EXITING THE MINE ON A MAN CARRIER HE TWISTED HIS BACK STRAINING MUSCLES.
WHILE EMPLOYEE WAS OPERATING A DRILL, HE WAS HIT IN THE EYE BY A PIECE OF WIRE.
1994 · 12 incidents
WHEN ROOF BOLTING, EMPLOYEE REACHED INTO HOLE TO PULL OUT A STEEL PIECE. AT THAT TIME A SMALL ROCK FELL ON EMPLOYEE'S LEFT ARM. THIS CAUSED HIS ARM TO TURN RED & SLIGHTLY SWELL.
EMPLOYEE WAS MAKING A BELT SPLICE,THE RED DEVIL CABLE BROKE AND HOOK SWUNG BACK HHITTING EMPLOYEE'S RIGHT KNEE.
YWHLE BOLTING EMPLOYEE GOT HIS FINGER CAUGHT BETWEENMINE ROOF AND BOTL PLATE, CUTTING FINGER.
WHILE LIFTING A BELT ROLLER, EE STRAINED NECK AREA.
EE WAS PULLING ON WINCH AND STRAINED BACK AREA BETWEEN SHOULDERS.
ROOF STRATA
WHILE DOING CLEAN UP WORK SMALL ROCK SLID OFF ROCK PILE & FELL ON EMPLOYEES RT FOOT
WHILE BEING TRANSPORTED OUTSIDE MANTRIP BOUNCED EE LEG INTO RIB.
EE WAS WORKING ON STARTING BOX AND TURNED AROUND QUICKLY AND HIT HIS HEAD ON.
EMPLOYEE WAS LIFTING TOP ROLLERS AND STRAINED UPPER PART OF STOMACH.
EMPLOYEE DROVE A BUGGY OVER A BLOCK OF COAL, MAKING THE BUGGY BOUNCE WHICH CAUSED HIM TO HIT HIS HEAD ON THE MINE ROOF.
EMPLOYEE HAS BEEN INFORMED BY HIS DOCTOR THAT HEHAS CONTRACTED AN OCCUPATIONAL DISEASE. EMPLOYEE STARTED WORKING 3-2-94 EMPLOYEE HAS WORKED FOR TWO WEEKS.
1993 · 13 incidents
EMPLOYEE INJURED BACK WHILE PICKING UP BAG OF ROCK DUST.
WHILE EMPLOYEE WAS CONDUCTING ROOF BOLTING OPERATIONS COMPLAINED OF PAIN IN LOWER BACK.
FORMER EMPLOYEE HAS BEEN INFORMED BY HIS DR. THAT HE HAS CONTRACTED AN OCCUPATIONAL DISEASE. NOTE: HE WAS LAID OFF OCTOBER 21, 1993 DUE TO LACK OF WORK.
FORMER EMPLOYEE HAS BEEN INFORMED BY HIS DOC THAT HE HAS CONTACTED AN OCCUPATIONAL DISEASE NOTE HE WAS LAID OFF OCT 21 1993 DUE TO LACK OF WORK
WHILE EMPLOYEE WAS EXITING OFFICE DOOR AND STUMBLED THEN FELL THROUGH DOOR INJURING LOWER BACK.
EMPLOYEE WAS BOLTING ROOF & SMASHED FINGERS ON LEFT HAND
EMPLOYEE FALLED ON AN ANCHOR PIN AND INJURED HIS BOTTOM, REQUIRING EDIATION AND SITZBATHS.
EMPLOYEE WAS PUSHING BOLT IN HOLE AND SMASHED LEFT HAND FRACTURING TWO FINGERS ROCK FELL ON LEFT HAND.
WHILE CUTTING COAL DRAW ROCK FELL ON EMPLOYEES LEFT LEG, INJURING HIS KNEE.
EE WAS BENDING BOLTS AND PULLED MUSCLE IN HAND. HE WENT TO THE DR. 8-13-93. HE DID NOT MISS ANY WORK BECAUSE OF INJURY.
EMPLOYEES WERE MAKING BELT SET UP. HE WAS WORKING NEAR THE TAIL PIECE AND ANOTHER EMPLOYEE HIT THE TAIL PIECE WITH A SCOOP, KNOCKING HIM DOWN.
EMPLOYEE WAS ROCK DUSTING AND GOT CAUGHT IN DRILL CABLE.
EMPLOYEE WAS LIFTING ON A BELT LINE AND INJURED BACK AND NECK.
1992 · 2 incidents
ELMPLOYEE WAS BACKING CUTTING MACHINE AND CAUGHT FOOT BETWEEN RIB AND CUTTER.
EMPLOYEE WAS STRAIGHTENING BOLT AND HURT HIS RIGHT ARM.