citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
100 citations across 1,089 inspection hours.
Source: MSHA inspections data, updated weekly.
4 has $8K in proposed MSHA penalties and $5K outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$8K
proposed penalties
$8K
current assessed
$3K
paid to date
$5K
outstanding
100 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2002-08-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at 4 shows 96% of 140 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2002-08-12, 24 years ago
96%
within 1.5 mg/m3
140
samples
2.97
dust max (mg/m3)
82 samples taken by MSHA inspectors, 58 by the operator.
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
4 recorded 4.46 reportable injury cases per 100 full-time workers in 2001.
Injury rate, 2001
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
4.46
total case rate
4.46
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 6.94 and the all-US-mining average was 5.26 cases per 100 workers.
In Kentucky, coal mining averaged 7.69 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2002
16
14,260
2001
24
56,496
2000
27
82,464
Source: MSHA quarterly employment and production, updated weekly.
4 sits in Pike County, Kentucky, where the Census mining category is 5.1% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Pike County, Kentucky · Population 57,466
5.1%
Mining share of county employment
$42,179
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2002 Q2
7,777
11
1
1414.4
2002 Q1
6,964
2
1
287.2
2001 Q4
6,751
16
7
2370.0
2001 Q3
10,591
14
9
1321.9
2001 Q2
13,395
8
6
597.2
2001 Q1
14,100
14
9
992.9
2000 Q4
12,838
9
2
701.0
2000 Q3
12,145
6
3
494.0
Show 1 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2000 Q2
10,865
10
5
920.4
No fatalities recorded at this mine.
Reportable incidents
3 on file
2002 · 1 incident
May 2, 2002KY · Coalcontinuous miner operator, coal mole operatorMACHINERY
WHILE OPERATING THE CONTINUOUS MINER HE WAS LOADING A SHUTTLE CAR WHEN A PIECE OF ROCK WAS THROWN FROM CONVEYOR STRIKING OPERATOR ONT HE LEFT SIDE OF HIS FACE. CAUSING A LACERATION TO HIS FORE HEAD AND CHEEK. LACERATION REQUIRED STITCHES.