Email me when a new MSHA incident is filed at No. 9.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2005 Q2 | 0 | 0 | 0 | |
| 2005 Q1 | 6,868 | 11 | 9 | 1601.6 |
| 2004 Q4 | 7,470 | 26 | 17 | 3480.6 |
| 2004 Q3 | 6,664 | 9 | 4 | 1350.5 |
| 2004 Q2 | 892 | 1 | 1 | 1121.1 |
| 2003 Q4 | 288 | 0 | 0 | 0.0 |
| 2003 Q3 | 5,229 | 5 | 2 | 956.2 |
| 2003 Q2 | 5,204 | 8 | 4 | 1537.3 |
EE STATED HE WAS PULLING MINER CABLE AND FELT PAIN IN LOWER BACK RIGHT SIDE.
ESCAVATOR OPERATOR FOR DICKENSON RUSSELL COAL CO. WAS CLEANING A SUMP & RUPTURED A GAS LINE. (NOTE: I DO NOT FEEL THIS WAS THE OBLIGATION OF CMZ ENTERPRISES IN THAT THIS INCIDENT OCCURRED OFF OF OUR PERMIT.)
An excavator operator was cleaning out and sump when the tooth of the bucket ruptured the pipeline. the excavator was out off and the gas company was immediately watified. this accident occurred off of mine and permitted property.
INJURED WAS CRAWLING, WHILE IN THE PROCESS RAISED HIS HEAD UP SOME AND HIT HIS HEAD ON A ROOF BOLT. ACCIDENT WASN'T REPORTED UNTIL 1-29-03 INJURED WORKED ALL SHIFT 1-27-03 WORKED ALL SHIFT ON 1-28-03, WORKED 2 HOURS ON 1-29-03, CAME OUTSIDEREPORTED ACCIDENT THEN WENT HOME.
INJURED WAS CRAWLING FROM ONE HEADING OVER TO ANOTHER. WHEN CROSSING OVER A PIECE OF CURTAIN THAT WAS LYING IN HALLWAY A NAIL FROM THE CURTAIN STUCK IN INJURED'S LEG.
INJURED WAS IN THE PROCESS OF INSTALLING ROOF BOLTS IN THE TOP OF THE #3 LEFT HEADING WHEN HIS BOLT WRENCH CAME LOOSE FROM THE ROOF BOLT HE WAS INSTALLING SMACKING HIS HAND.
INJURED WAS TRAMMING THE ROOF BOLTER INTO THE #2 HEADING TO START BOLTING TOP WHEN A PIECE OF ROCK FELL HITTING HIM, KNOCKING HIM INTO THE MACHINE CAUSING HIM TO HIT HIS HEAD ON THE DECK.
FALL AT SURVEY STATION 978 EXTEND APP. 45' TOWARD SURVEY STATION 981. HEIGHT IS UNKNOWN BUT HAVE DETERMINED THE FALL WAS ABOVE SUPPORT.
SUBJECT WAS USING A BALLPIEN HAMMER WHILE IN PROCESS OF DRIVING OUT A AXLE PIN SUBJECT HIT THUMB WITH HAMMER ACCIDENT OCCURED IN SHOP AREA OF MINES ON SURFACE.
EE FELL IN PARKING LOT, MASHING AND CUTTING FINGER ON A ROCK INDEX FINGER-RIGHT HAND.
INJURED WAS IN THE PROCESS OF REMOVING A PIECE OF ROCK OUT OF THE THROAT OF THE CONTINUOUS MINER WHEN INJURED FELT PAIN IN LOWER BACK.
INJURED WAS IN THE PROCESS OF TIGHTENING UP THE CONVEYOR BELT LONG JOHN WITH THE S & S BATTERY SCOOP WHEN THE CHAIN CAME LOOSE FLYING BACK HITTING THE SCOOP OPERATOR IN THE RIGHT SIDE OF THE H EAD CAUSING A LACERATION UNDER THE RIGHT EYE.
INJURED WAS DOING REPAIR WORK ON THE JEFFREY CONTINUOUS MINER, INJURED WAS IN THE PROCESS OF ROLLING THE CONTINUOUS MINER'S RIPPER HEAD MANUALLY WHEN INJURED FELT PAIN IN HIS LOWER BACK.
INJURED WAS IN THE PROCESS OF CLEANING OUT A CONVEYER CHAIN THAT HAD FOWLED UP AND GOBBED OFF, INJURED WAS REMOVING THE GOB BY HAND WHEN GOB BROKE FREE, FREEING UP FOWLED CHAIN WHEN THIS HAPPE NED CONVEYER CHAIN CAUGHT INJURED'S LEFT HAND RESULTING IN THE INJURY.
ACCIDENT HAPPENED ON 6/13/00; VICTIM DIDN'T RPT IT UNTIL 6/20/00. HE WAS HELPING MAKE A BELT SPLICE ON THE #4 BELT CONVEYOR LINE, MINE HEIGHTAPPOX. 38" TO 42" AT THIS LOCATION. HE WAS SIT- TING ON THE MINE FLOOR WORKING A HAND-OPERATED CHAIN HOIST WHICH WAS BEING USED TO PULL THE BELT BACK TOGETHER WITH WHILE IN THIS PROCESS HESAID HE FELT A PAIN IN HIS LOWER BACK.