Excavator operator on stripping crew was stepping down out of the excavator when they felt a pop in left calf area of leg. The employee let their supervisor know and continued to work the remainder of the shift. The injury increased in pain and the employee was sent to the occupational clinic.
Adams Quarry: 28 MSHA citations Metal/Non-Metal
IN Limestone Co
· Surface
Controlled by
Polycor Inc
Bloomington,
Monroe County,
IN
·
Active
MSHA Mine ID: 1200049
Adams Quarry has $9K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Adams Quarry.
- Fatalities
- 0
- Total incidents
- 3
- Years on record
- 2023–2025
- Latest incident
- Nov 2025
Compliance record
MSHA citations since 2018
28
citations
8
significant & substantial
$9,375
proposed penalties
$9,375
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2018
20
inspections on record
241
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 241 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Adams Quarry has $9K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$9K
proposed penalties
$9K
current assessed
$9K
paid to date
$0
outstanding
28 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2025-03-17.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.28.6%
significant & substantial
7.1%
high negligence or reckless
28.6%
reasonably likely or greater
21.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 92.9% moderate, 7.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2025-05-13
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.7
samples
0
limit-tested
Most sampled contaminants
- Respirable dust, <.1mg4
- Unlisted Particulate, respirable, <1% Qtz2
- Quartz, respirable, >1% Qtz1
Show the individual readings (7)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2025-05-13 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2025-05-13 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2025-05-13 | Quartz, respirable, >1% Qtz | 0.5 | Bulldozer Operator | ||
| 2025-05-13 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2025-05-13 | Respirable dust, <.1mg | 0 | Stone Polisher/Cutter | ||
| 2021-03-29 | Unlisted Particulate, respirable, <1% Qtz | 0.13 | Laborer, Bullgang | ||
| 2021-03-29 | Unlisted Particulate, respirable, <1% Qtz | 0.13 | Laborer, Bullgang |
Area samples (mill and shop air)
Last sampled: 2025-05-131
samples
Show the individual readings (2)
| Date | Contaminant | Concentration | Limit | Conc / limit | Area sampled |
|---|---|---|---|---|---|
| 2025-05-13 | ANALYZED BULK DUST MASS | 0 | SF ACTIVE MINING | ||
| 2025-05-13 | QUARTZ (BULK DUST) | 0 | SF ACTIVE MINING |
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Adams Quarry recorded 10.20 reportable injury cases per 100 full-time workers in 2025.
Injury rate, 2025
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.10.20
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Indiana, metal and nonmetal mining averaged 1.61 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2025 * | 10.20 | 0.00 | 0.000 |
| 2024 * | 0.00 | 0.00 | 0.000 |
| 2023 * | 5.62 | 0.00 | 0.000 |
| 2022 * | 0.00 | 0.00 | 0.000 |
| 2021 * | 0.00 | 0.00 | 0.000 |
| 2020 * | 0.00 | 0.00 | 0.000 |
| 2019 * | 0.00 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
- Indiana Limestone Company Inc 1992 to 2017
- IN Limestone Co 2017 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
| Year | Employees |
|---|---|
| 2026 | 19 |
| 2025 | 18 |
| 2024 | 10 |
| 2023 | 17 |
| 2022 | 14 |
| 2021 | 13 |
| 2020 | 15 |
| 2019 | 18 |
| 2018 | 8 |
| 2017 | 4 |
Source: MSHA quarterly employment and production, updated weekly.
Adams Quarry sits in Monroe County, Indiana, where the Census mining category is 0.1% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Monroe County, Indiana · Population 139,822
0.1%
Mining share of county employment
$63,372
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 12,321 | 0 | 0 | 0.0 |
| 2026 Q1 | 9,481 | 0 | 0 | 0.0 |
| 2025 Q4 | 10,083 | 0 | 0 | 0.0 |
| 2025 Q3 | 11,246 | 0 | 0 | 0.0 |
| 2025 Q2 | 11,146 | 0 | 0 | 0.0 |
| 2025 Q1 | 6,739 | 1 | 0 | 148.4 |
| 2024 Q4 | 4,300 | 0 | 0 | 0.0 |
| 2024 Q3 | 6,607 | 6 | 5 | 908.1 |
Show 27 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 5,509 | 0 | 0 | 0.0 |
| 2024 Q1 | 4,192 | 0 | 0 | 0.0 |
| 2023 Q4 | 4,855 | 0 | 0 | 0.0 |
| 2023 Q3 | 7,724 | 1 | 0 | 129.5 |
| 2023 Q2 | 9,460 | 0 | 0 | 0.0 |
| 2023 Q1 | 13,557 | 6 | 1 | 442.6 |
| 2022 Q4 | 8,121 | 0 | 0 | 0.0 |
| 2022 Q3 | 7,621 | 0 | 0 | 0.0 |
| 2022 Q2 | 8,519 | 2 | 1 | 234.8 |
| 2022 Q1 | 5,457 | 0 | 0 | 0.0 |
| 2021 Q4 | 4,692 | 5 | 1 | 1065.6 |
| 2021 Q3 | 5,814 | 0 | 0 | 0.0 |
| 2021 Q2 | 9,158 | 0 | 0 | 0.0 |
| 2021 Q1 | 6,709 | 2 | 0 | 298.1 |
| 2020 Q4 | 7,174 | 0 | 0 | 0.0 |
| 2020 Q3 | 8,289 | 0 | 0 | 0.0 |
| 2020 Q2 | 8,467 | 0 | 0 | 0.0 |
| 2020 Q1 | 6,802 | 0 | 0 | 0.0 |
| 2019 Q4 | 9,656 | 2 | 0 | 207.1 |
| 2019 Q3 | 13,080 | 0 | 0 | 0.0 |
| 2019 Q2 | 10,066 | 0 | 0 | 0.0 |
| 2019 Q1 | 4,935 | 1 | 0 | 202.6 |
| 2018 Q4 | 54 | 0 | 0 | 0.0 |
| 2018 Q3 | 4,667 | 0 | 0 | 0.0 |
| 2018 Q2 | 4,605 | 1 | 0 | 217.2 |
| 2018 Q1 | 2,329 | 0 | 0 | 0.0 |
| 2017 Q4 | 1,716 | 0 | 0 | 0.0 |
No fatalities recorded at this mine.
Reportable incidents
3 on file2025 · 2 incidents
November 18, 2025
IN · Metal/Non-Metal
stone finishing and sizing personnel, stone/rock cut/polish/saw operator, splitter, cutter, trimmer
OTHER
IN Limestone Co · Bodily reaction, (Not Elsewhere Classified)
June 2, 2025
IN · Metal/Non-Metal
stone finishing and sizing personnel, stone/rock cut/polish/saw operator, splitter, cutter, trimmer
HANDLING OF MATERIALS
IN Limestone Co · Caught in, under or between a moving and a stationary object
Employee was helping put a saw bar back on the saw as EE was adjusting the bolts to fit back in the bolt hole, a team member moved the bar by hand resulting in the bar shifting positions and pinching the employees hand in a pinch point. The employees palm and thumb were caught between the saw and bar briefly.
2023 · 1 incident
May 5, 2023
IN · Metal/Non-Metal
bulldozer operator, universal operator, heavy equipment operator, operating engineer
DISORDERS (REPEATED TRAUMA)
IN Limestone Co · (Not Elsewhere Classified)
Miner Showed a Standard Threshold Shift in annual audiogram results.