Employee was replacing blow bars on the crusher. While removing the old blow bars with a hammer a piece of metal flaked off striking employee in the face.
BABCOCK MINE: 79 MSHA citations Metal/Non-Metal
BABCOCK MINE has $8K in proposed MSHA penalties and $0 outstanding across 6 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at BABCOCK MINE.
- Fatalities
- 0
- Total incidents
- 20
- Years on record
- 1986–2016
- Latest incident
- Jun 2016
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.ⓘ
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.BABCOCK MINE has $8K in proposed MSHA penalties and $0 outstanding across 6 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 12 · 80%
- Stood as issued 2 · 13%
- Vacated or withdrawn 1 · 7%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| SE 2011-310M | Settlement | Lewis | 2012 | $805 → $700 |
| SE 2010-770M | Settlement | Lewis | 2012 | $585 → $485 |
| SE 2011-262M | Settlement | Lewis | 2012 | $500 → $500 |
| SE 2008-231M | Settlement | Lesnick | 2009 | $499 → $450 |
| SE 2007-51M | Default | Lesnick | 2007 | $120 → $120 |
| SE 2008-232M | Settlement | Lesnick | 2010 | $100 → $90 |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2014-01-29, 12 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Respirable dust, <.1mg18
- Nuisance dust, respirable, <1% Qtz3
Show the individual readings (21)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2014-01-29 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2014-01-29 | Respirable dust, <.1mg | 0 | Mechanic | ||
| 2014-01-29 | Respirable dust, <.1mg | 0 | Dragline Operator | ||
| 2014-01-29 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2014-01-29 | Respirable dust, <.1mg | 0 | Dragline Operator | ||
| 2010-10-20 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2010-10-20 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2010-10-20 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2010-10-20 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2005-05-10 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2005-05-10 | Nuisance dust, respirable, <1% Qtz | 0.2 | 10 | 0.02 | Truck Driver |
| 2005-05-10 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2004-02-11 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2004-02-11 | Nuisance dust, respirable, <1% Qtz | 0.44 | 10 | 0.04 | Front-end Loader Operator |
| 2004-02-11 | Respirable dust, <.1mg | 0 | Dragline Operator | ||
| 2004-02-11 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2003-07-29 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2003-07-29 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2003-07-29 | Respirable dust, <.1mg | 0 | Oiler, Greaser | ||
| 2003-07-29 | Nuisance dust, respirable, <1% Qtz | 0.39 | 10 | 0.04 | Backhoe Operator |
| 2003-07-29 | Respirable dust, <.1mg | 0 | Front-end Loader Operator |
BABCOCK MINE recorded 9.62 reportable injury cases per 100 full-time workers in 2016.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2016 * | 9.62 | 0.00 | 0.000 |
| 2015 * | 0.00 | 0.00 | 0.000 |
| 2014 * | 0.00 | 0.00 | 0.000 |
| 2013 * | 0.00 | 0.00 | 0.000 |
| 2012 * | 0.00 | 0.00 | 0.000 |
| 2011 * | 0.00 | 0.00 | 0.000 |
| 2010 * | 8.43 | 0.00 | 0.000 |
| 2009 * | 0.00 | 0.00 | 0.000 |
- Florida Mining & Materials Corp 1985 to 1988
- Florida Mining & Materials Corp 1988 to 1992
- Vulcan/Ica Distribution Company 1993 to 1994
- Earth Source Inc 1994 to present
| Year | Employees |
|---|---|
| 2017 | 8 |
| 2016 | 11 |
| 2015 | 12 |
| 2014 | 12 |
| 2013 | 12 |
| 2012 | 10 |
| 2011 | 12 |
| 2010 | 10 |
| 2009 | 11 |
| 2008 | 22 |
| 2007 | 25 |
| 2006 | 25 |
| 2005 | 22 |
| 2004 | 19 |
| 2003 | 17 |
| 2002 | 14 |
| 2001 | 12 |
| 2000 | 12 |
BABCOCK MINE sits in Charlotte County, Florida, where the Census mining category is 0.0% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2017 Q2 | 1,747 | 0 | 0 | 0.0 |
| 2017 Q1 | 3,797 | 0 | 0 | 0.0 |
| 2016 Q4 | 5,031 | 1 | 0 | 198.8 |
| 2016 Q3 | 4,611 | 0 | 0 | 0.0 |
| 2016 Q2 | 7,617 | 0 | 0 | 0.0 |
| 2016 Q1 | 3,534 | 0 | 0 | 0.0 |
| 2015 Q4 | 8,717 | 5 | 1 | 573.6 |
| 2015 Q3 | 8,012 | 0 | 0 | 0.0 |
Show 62 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2015 Q2 | 7,330 | 1 | 0 | 136.4 |
| 2015 Q1 | 7,114 | 0 | 0 | 0.0 |
| 2014 Q4 | 6,492 | 0 | 0 | 0.0 |
| 2014 Q3 | 8,222 | 4 | 0 | 486.5 |
| 2014 Q2 | 6,879 | 0 | 0 | 0.0 |
| 2014 Q1 | 7,742 | 2 | 0 | 258.3 |
| 2013 Q4 | 6,800 | 0 | 0 | 0.0 |
| 2013 Q3 | 6,975 | 0 | 0 | 0.0 |
| 2013 Q2 | 6,871 | 0 | 0 | 0.0 |
| 2013 Q1 | 6,386 | 1 | 0 | 156.6 |
| 2012 Q4 | 6,008 | 0 | 0 | 0.0 |
| 2012 Q3 | 5,726 | 1 | 0 | 174.6 |
| 2012 Q2 | 6,098 | 0 | 0 | 0.0 |
| 2012 Q1 | 5,304 | 0 | 0 | 0.0 |
| 2011 Q4 | 4,867 | 1 | 0 | 205.5 |
| 2011 Q3 | 5,917 | 0 | 0 | 0.0 |
| 2011 Q2 | 5,177 | 1 | 0 | 193.2 |
| 2011 Q1 | 6,610 | 0 | 0 | 0.0 |
| 2010 Q4 | 6,547 | 9 | 1 | 1374.7 |
| 2010 Q3 | 6,325 | 3 | 2 | 474.3 |
| 2010 Q2 | 5,989 | 0 | 0 | 0.0 |
| 2010 Q1 | 4,864 | 5 | 1 | 1028.0 |
| 2009 Q4 | 4,228 | 0 | 0 | 0.0 |
| 2009 Q3 | 5,509 | 0 | 0 | 0.0 |
| 2009 Q2 | 5,992 | 2 | 0 | 333.8 |
| 2009 Q1 | 6,635 | 0 | 0 | 0.0 |
| 2008 Q4 | 9,268 | 0 | 0 | 0.0 |
| 2008 Q3 | 12,230 | 0 | 0 | 0.0 |
| 2008 Q2 | 16,729 | 0 | 0 | 0.0 |
| 2008 Q1 | 11,692 | 0 | 0 | 0.0 |
| 2007 Q4 | 12,228 | 3 | 1 | 245.3 |
| 2007 Q3 | 11,663 | 0 | 0 | 0.0 |
| 2007 Q2 | 13,355 | 0 | 0 | 0.0 |
| 2007 Q1 | 12,251 | 0 | 0 | 0.0 |
| 2006 Q4 | 10,493 | 4 | 0 | 381.2 |
| 2006 Q3 | 11,798 | 0 | 0 | 0.0 |
| 2006 Q2 | 10,282 | 4 | 2 | 389.0 |
| 2006 Q1 | 10,143 | 0 | 0 | 0.0 |
| 2005 Q4 | 10,788 | 0 | 0 | 0.0 |
| 2005 Q3 | 13,424 | 0 | 0 | 0.0 |
| 2005 Q2 | 12,687 | 2 | 0 | 157.6 |
| 2005 Q1 | 13,118 | 0 | 0 | 0.0 |
| 2004 Q4 | 9,384 | 2 | 0 | 213.1 |
| 2004 Q3 | 10,906 | 0 | 0 | 0.0 |
| 2004 Q2 | 11,182 | 0 | 0 | 0.0 |
| 2004 Q1 | 13,860 | 0 | 0 | 0.0 |
| 2003 Q4 | 8,309 | 0 | 0 | 0.0 |
| 2003 Q3 | 11,692 | 2 | 0 | 171.1 |
| 2003 Q2 | 10,800 | 0 | 0 | 0.0 |
| 2003 Q1 | 9,107 | 1 | 0 | 109.8 |
| 2002 Q4 | 16,899 | 0 | 0 | 0.0 |
| 2002 Q3 | 15,620 | 0 | 0 | 0.0 |
| 2002 Q2 | 8,600 | 2 | 0 | 232.6 |
| 2002 Q1 | 8,480 | 0 | 0 | 0.0 |
| 2001 Q4 | 7,320 | 0 | 0 | 0.0 |
| 2001 Q3 | 7,200 | 0 | 0 | 0.0 |
| 2001 Q2 | 7,696 | 3 | 0 | 389.8 |
| 2001 Q1 | 7,150 | 0 | 0 | 0.0 |
| 2000 Q4 | 6,800 | 2 | 0 | 294.1 |
| 2000 Q3 | 7,140 | 0 | 0 | 0.0 |
| 2000 Q2 | 7,800 | 6 | 2 | 769.2 |
| 2000 Q1 | 5,980 | 0 | 0 | 0.0 |
Reportable incidents
20 on file2016 · 2 incidents
While drilling, the Kelly Bar was drilled down to full depth. EE climbed on the drill deck to unlock the inner steel. As EE inserted the pry bar to disengage the J-Lock, the drill operator inadvertently put the drill steel in reverse. EE's arm was pinned between the pry bar and the mast of the drill. The injury resulted in swelling and a bruise to EE's right forearm.
2010 · 1 incident
He was loading a drum of grease onto the dragline when it slipped and cut his finger.
2006 · 1 incident
EMPLOYEE FELL APPROX. 4 FEET TO THE GROUND WHILE CLIMBING DOWN OFF OF THE 4600 DRAGLINE. HE RECEIVED A BROKEN WRIST ON HIS LEFT ARM AND A FRACTURE ON THE INSIDE OF THE PELVIS. EMPLOYEE DID NOT USE THE LADDER THAT WAS PROVIDED TO ACCESS AND EXIT THE EQUIPMENT.
2005 · 2 incidents
Employee stated he was pulling fuel hose from service truck to fuel a piece of equipment when he felt a pain in his lower back. He did not tell anyone about this until 9-8-05. He doesn't recall what day he actually did this or what time it was.
Operator stated that he ran over a rock and that it jarred his back when the loader rocked from side to side. The rock was about 10 inches by 12 inches.
1996 · 1 incident
WHILE INSTALLING A 4 TOOTH ON A LADDER BUCKET, THE TOOTH FELL STRIKING THE RIGHT FOOT.
1995 · 1 incident
WHILE SERVICING THE MOBILE SCREEN A SMALL ROCK FELL OFF A CONVEYOR BELT & STRUCK THIS PERSON ON THE HEAD.
1992 · 2 incidents
WHILE WALKING DOWN STAIRS FROM CRUSHER, INDIVIDUAL STEPPED ON SIDE OF RIGHT FOOT.
TRYING TO REWRAP A CABLE,STRAND CAME LOOSE AND CUT LEFT FOREARM.
1991 · 2 incidents
WHILE PULLING ON DRAGLINE CABLE IT FELT LIKE I GOT SOMETHING IN MY RIGHT EYE.
FELL OFF PIPE WHILE GETTING OFF CYCLONE. TWISTED HIS LEFT ANKLE WHEN HE STEPPED ON ROCK.
1990 · 1 incident
WHILE I WAS INSTALLING A TOOTH ON THE DRAGLINE BUCKET, MY LEFT INDEX FINGER GOT CAUGHT BETWEEN THE TOOTH AND THE SHANK.
1989 · 1 incident
CHANGING BELTS ON PRIMARY CRUSHER AND HOIST ROPE BROKE,PULLEY ASSEMBLY CAME DOWN ON FINGER.
1988 · 2 incidents
FELL OVER A ROL OF SCREENING IN DARK TWISTED AND FEL LANDED ON L. KNEE N PC. OF STEEL
CUTTING HOSE FROM PUMP TO FUEL TANK KNIFE SLIPPED AND HIT LEFT ARM.
1987 · 1 incident
WORKING ON SCRE9N AND BUMPED HEAD ON STEEL,REQUIRING 3 STITCHES.
1986 · 3 incidents
EMPLOYEE REPORT9D TO THE OFFICE THAT HE HAD A RASH ON HIS BACK & CHEST. HIS DOCTOR DIAGNOSED IT AS LIMEROCK POISON.
EMPLOYEE WAS MO5ING THE HOSE ON THE DRILL RIG & A LARGE ROCK ROLLED DOWN AN EMBANKMENT & MASHED RIGHT INDEX FINGER
CARRYING 5 GAL 6UCKET OF SAND PULLED LOWER BACK-REQ NARR 2-20-86.