Mining Incidents

Bainbridge Quarry LLC: 92 MSHA citations Metal/Non-Metal

Bainbridge Quarry LLC · Surface
Bainbridge, Putnam County, IN  ·  Active
MSHA Mine ID: 1200039

Bainbridge Quarry LLC has $11K in proposed MSHA penalties and $151 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Bainbridge Quarry LLC.

Fatalities
0
Total incidents
10
Years on record
1989–2017
Latest incident
Aug 2017
Compliance record
MSHA citations since 2000
92
citations
14
significant & substantial
$10,675
proposed penalties
$10,524
paid to date
99% of proposed penalties paid to date, a $151 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
50
inspections on record
645
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 645 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Bainbridge Quarry LLC has $11K in proposed MSHA penalties and $151 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$11K
proposed penalties
$11K
current assessed
$11K
paid to date
$151
outstanding
92 assessments are final orders; 1 contested dockets.
Of $7K in penalties contested before the Commission, $0 was upheld in final decisions.
As of the most recent assessment on 2026-01-05.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
15.2%
significant & substantial
6.5%
high negligence or reckless
15.2%
reasonably likely or greater
31.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 6.5% low, 87.0% moderate, 6.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1 citations taken to the federal commission · 1% of citations on record
  • Vacated or withdrawn 1 · 100%
0%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
100%
Penalty reduction in decided contests
$7K proposed, $0 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2013-01-08.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
LAKE 2013-225M Withdrawal Miller 2013 $7K → $0
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2025-03-25
0%
of limit-tested samples over the exposure limit
10
samples
5
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg5
  • Nuisance dust, respirable, <1% Qtz4
  • Quartz, respirable, >1% Qtz1
Show the individual readings (10)
Date Contaminant Concentration Limit Conc / limit Occupation
2025-03-25 Respirable dust, <.1mg 0 Utility Man
2019-08-28 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-05-18 Nuisance dust, respirable, <1% Qtz 0.15 10 0.02 Truck Driver
2010-05-18 Nuisance dust, respirable, <1% Qtz 0.93 10 0.09 Crusher Oper/Worker
2010-05-18 Nuisance dust, respirable, <1% Qtz 0.27 10 0.03 Truck Driver
2010-05-18 Nuisance dust, respirable, <1% Qtz 0.19 10 0.02 Truck Driver
2010-05-18 Respirable dust, <.1mg 0 Front-end Loader Operator
2006-04-12 Quartz, respirable, >1% Qtz 0.75 1.33 0.56 Shovel Operator
2006-04-12 Respirable dust, <.1mg 0 Front-end Loader Operator
2006-04-12 Respirable dust, <.1mg 0 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Bainbridge Quarry LLC recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Indiana, metal and nonmetal mining averaged 1.61 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Harris Stone Service Inc 1950 to 2024
  2. Bainbridge Quarry LLC 2024 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 10
2025 10
2024 10
2023 0
2022 0
2021 0
2020 1
2019 5
2018 6
2017 7
2016 7
2015 7
2014 7
2013 7
2012 7
2011 7
2010 8
2009 8
2008 8
2007 7
2006 5
2005 5
2004 7
2003 7
2002 7
2001 7
2000 8
Source: MSHA quarterly employment and production, updated weekly.

Bainbridge Quarry LLC sits in Putnam County, Indiana, where the Census mining category is 0.7% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Putnam County, Indiana · Population 37,091
0.7%
Mining share of county employment
$76,182
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 5,465 0 0 0.0
2026 Q1 4,409 1 0 226.8
2025 Q4 4,966 0 0 0.0
2025 Q3 5,325 0 0 0.0
2025 Q2 5,776 0 0 0.0
2025 Q1 6,103 2 0 327.7
2024 Q4 6,558 0 0 0.0
2024 Q3 4,288 0 0 0.0
Show 96 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2023 Q4 0 0 0
2023 Q3 0 0 0
2023 Q2 0 0 0
2023 Q1 0 0 0
2022 Q4 0 0 0
2022 Q3 0 0 0
2022 Q2 0 0 0
2022 Q1 0 0 0
2021 Q4 0 0 0
2021 Q3 0 0 0
2021 Q2 0 0 0
2021 Q1 0 0 0
2020 Q4 0 0 0
2020 Q3 0 0 0
2020 Q2 0 0 0
2020 Q1 282 0 0 0.0
2019 Q4 1,675 0 0 0.0
2019 Q3 2,120 3 0 1415.1
2019 Q2 1,840 0 0 0.0
2019 Q1 311 1 0 3215.4
2018 Q4 2,126 0 0 0.0
2018 Q3 2,223 0 0 0.0
2018 Q2 2,409 2 2 830.2
2018 Q1 1,848 1 0 541.1
2017 Q4 3,256 0 0 0.0
2017 Q3 3,374 2 0 592.8
2017 Q2 3,387 0 0 0.0
2017 Q1 2,452 0 0 0.0
2016 Q4 3,223 0 0 0.0
2016 Q3 3,472 1 1 288.0
2016 Q2 3,449 0 0 0.0
2016 Q1 2,393 0 0 0.0
2015 Q4 3,143 0 0 0.0
2015 Q3 3,070 0 0 0.0
2015 Q2 2,762 0 0 0.0
2015 Q1 1,838 1 0 544.1
2014 Q4 3,232 0 0 0.0
2014 Q3 2,827 2 0 707.5
2014 Q2 3,682 0 0 0.0
2014 Q1 1,286 0 0 0.0
2013 Q4 3,676 2 0 544.1
2013 Q3 3,320 0 0 0.0
2013 Q2 3,260 1 0 306.7
2013 Q1 2,911 1 0 343.5
2012 Q4 3,665 0 0 0.0
2012 Q3 2,888 0 0 0.0
2012 Q2 3,019 1 0 331.2
2012 Q1 2,150 0 0 0.0
2011 Q4 3,674 7 0 1905.3
2011 Q3 4,079 0 0 0.0
2011 Q2 4,041 6 1 1484.8
2011 Q1 2,614 0 0 0.0
2010 Q4 3,780 0 0 0.0
2010 Q3 3,977 0 0 0.0
2010 Q2 4,259 8 3 1878.4
2010 Q1 3,020 0 0 0.0
2009 Q4 4,122 0 0 0.0
2009 Q3 4,464 0 0 0.0
2009 Q2 4,275 6 0 1403.5
2009 Q1 3,336 0 0 0.0
2008 Q4 4,008 0 0 0.0
2008 Q3 4,935 0 0 0.0
2008 Q2 3,448 4 1 1160.1
2008 Q1 3,172 0 0 0.0
2007 Q4 4,168 0 0 0.0
2007 Q3 4,449 0 0 0.0
2007 Q2 3,791 1 0 263.8
2007 Q1 2,743 0 0 0.0
2006 Q4 2,921 4 0 1369.4
2006 Q3 3,096 0 0 0.0
2006 Q2 2,856 6 0 2100.8
2006 Q1 2,925 0 0 0.0
2005 Q4 3,002 0 0 0.0
2005 Q3 3,105 0 0 0.0
2005 Q2 3,135 0 0 0.0
2005 Q1 2,800 0 0 0.0
2004 Q4 2,985 0 0 0.0
2004 Q3 3,366 12 2 3565.1
2004 Q2 3,943 0 0 0.0
2004 Q1 3,547 0 0 0.0
2003 Q4 4,103 0 0 0.0
2003 Q3 4,065 0 0 0.0
2003 Q2 4,273 6 2 1404.2
2003 Q1 3,205 0 0 0.0
2002 Q4 3,788 0 0 0.0
2002 Q3 4,473 0 0 0.0
2002 Q2 3,994 0 0 0.0
2002 Q1 3,629 0 0 0.0
2001 Q4 3,952 4 1 1012.1
2001 Q3 4,157 0 0 0.0
2001 Q2 4,172 4 1 958.8
2001 Q1 3,902 0 0 0.0
2000 Q4 4,007 0 0 0.0
2000 Q3 4,792 3 0 626.0
2000 Q2 4,470 0 0 0.0
2000 Q1 3,465 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

10 on file

2017 · 1 incident

August 24, 2017 IN · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Harris Stone Service Inc · Over-exertion (Not Elsewhere Classified)

EE re-assembled bearing in bearing housing. As afternoon progressed, EE's back stiffened up and began to hurt; EE worked till the end of day; went to the doctor the next day when back had not improved.

2014 · 2 incidents

July 31, 2014 IN · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Harris Stone Service Inc · Struck by... (Not Elsewhere Classified)

EE was clearing material buildup from a grizzly chute in advance of the primary crusher when a portion of the material dislodged and rolled to a point where it impacted his left ankle against a structural beam. This resulted in a fracture of the fibula at the ankle.

July 25, 2014 IN · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Harris Stone Service Inc · Caught in, under or between a moving and a stationary object

While tightening hood closure lock bolts on an impact crusher, using a slugging wrench and sledge hammer, employee struck an errant blow causing his right index finger to pass between the hammer handle and wrench. This resulted in the cutting and spreading of finger tissue beyond the knuckle. He was treated at emergency room where stitches were installed. He returned to work.

2013 · 1 incident

July 24, 2013 IN · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger MACHINERY
Harris Stone Service Inc · Struck by... (Not Elsewhere Classified)

While cutting brush in a storage area chainsaw kicked from cut and contacted left knee causing a 1 1/2" cut. After cleaning and dressing at office it was decided to seek medical treatment. EE was taken to hospital where stitches were used to close the cut.

2007 · 2 incidents

December 4, 2007 IN · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Harris Stone Service Inc · Fall from machine

During start-up of inspection, stepped onto cab entry step (platform). After checking dump body for stuck material, slipped on frosty surface and fell 3' to ground landing on left shoulder. Suffered separated shoulder and has been off duty since.

October 9, 2007 IN · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver ALL OTHER OCCUPATIONAL ILLNESSES
Harris Stone Service Inc · (Not Elsewhere Classified)

EE suffered a seizure while in office prior to start of shift. Taken to Hospial by ambulance, release that afternoon. Referred to Neurologist, cause undetermined, possible side effect of medication, now discontinued. Released to return to work.

2001 · 1 incident

February 27, 2001 IN · Metal/Non-Metal truck driver HANDLING OF MATERIALS
Harris Stone Service Inc · Over-exertion in pulling or pushing objects

WHILE SHOVELING CRUSHED STONE FROM A CONVEYOR BELT, WHICH HAD STALLED AND BECOME OVERLOADED, IN PREPARATION FOR RESTARTING THE CONVEYOR, EE STATES THAT HE TURNED TO DISPOSE OF A SHOVEFUL OF ST ONE AND FELT A PAIN INHIS BACK WHICH SUBSIDED. STIFFNESS AND PAIN SET IN THAT EVENING. HESOUGHT MEDICAL ATTENTION THE FOLLOWING DAY AND WAS OFF WORK A TOTAL OF 3 DAYS.

1999 · 1 incident

October 30, 1999 IN · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Harris Stone Service Inc · (Not Elsewhere Classified)

END OF SHIFT - WALKING TO PICK-UP TO RIDE TO PARKING AREA.

1991 · 1 incident

December 10, 1991 IN · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Harris Stone Service Inc · Struck by flying object

WHILE CHANGING A FRONT END LOADER TIRE, SURBER WAS ALIGNING A RING ROTATION LOCK BY POSITIONING A PUNCH AGAINST IT WHILE ANOTHER EMPLOYEE STRUCK THE PUNCH WITH A HAMMER. A PIECE OF METAL CHIPP ED FROM THE PUNCH AND STRUCK SURBER'S THUMB PENETRATING AND EMBEDDING THERE.

1989 · 1 incident

May 31, 1989 IN · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Harris Stone Service Inc · Struck by rolling or sliding object

NEW TEETH WERE BEING INSTALLED ON A DRAGLING BUCKET. WHEN ONE OF THE OLD TEETH WAS STUCK WITH A SLEDGE HAMMER, TO REMOVE IT, A CHIP OF METAL BROKE FROM THE TOOTH. THIS CHIP STRUCK TINCHER IN THE UPPER ADOMEN PENTRATING HIS BODY AND LODGING IN HIS LIVER. HE WAS TAKEN IMMEDIATLY TO HOSPITAL WHERE OBJECT WAS REMOVED SURGICALLY. WAITING TO GIVE FURTHER ASSISTANCE ON THIS TASK.