Bear Branch Mine Auger No. 1: 7 MSHA citations Coal
Bear Branch Mine Auger No. 1 has $844 in proposed MSHA penalties and $227 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Bear Branch Mine Auger No. 1.
- Fatalities
- 0
- Total incidents
- 0
- Years on record
- —
- Latest incident
- —
Compliance record
MSHA citations since 2009
7
citations
3
significant & substantial
$844
proposed penalties
$617
paid to date
73% of proposed penalties paid to date, a $227 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2009
11
inspections on record
161
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 161 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Bear Branch Mine Auger No. 1 has $844 in proposed MSHA penalties and $227 outstanding across 0 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$844
proposed penalties
$844
current assessed
$617
paid to date
$227
outstanding
7 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2013-07-31.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.42.9%
significant & substantial
0.0%
high negligence or reckless
42.9%
reasonably likely or greater
42.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at Bear Branch Mine Auger No. 1 shows 100% of 17 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2013-07-31, 13 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
17
samples
0.74
dust max (mg/m3)
17 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
- AUGER OPERATOR6
- GROUNDMAN4
- AUGER HELPER3
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2012-11-05, 13 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.50%
over PEL
10
samples
Most-sampled occupations
- AUGER OPERATOR4
- AUGER HELPER2
- COAL TRUCK DRIVER2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust by year
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2013 | 100% | 4 |
| 2012 | 100% | 9 |
| 2011 | 100% | 2 |
| 2009 | 100% | 2 |
Noise by year
| Year | over PEL | samples |
|---|---|---|
| 2012 | 33% | 6 |
| 2011 | 50% | 2 |
| 2009 | 100% | 2 |
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Ownership history
- Augustus Augering & Contracting Inc 2008 to 2012
- Mineral Logistics, LLC 2012 to 2012
- Hard Rock Energy, LLC 2012 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2013 | 2 | 1,100 |
| 2012 | 2 | 7,594 |
| 2011 | 2 | 9,193 |
| 2010 | 3 |
Source: MSHA quarterly employment and production, updated weekly.
Bear Branch Mine Auger No. 1 sits in Pike County, Kentucky, where the Census mining category is 5.1% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Pike County, Kentucky · Population 57,466
5.1%
Mining share of county employment
$42,179
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2013 Q3 | 280 | 1 | 1 | 3571.4 |
| 2013 Q1 | 0 | 0 | 0 | |
| 2012 Q4 | 680 | 1 | 1 | 1470.6 |
| 2012 Q3 | 0 | 1 | 1 | |
| 2012 Q2 | 40 | 0 | 0 | 0.0 |
| 2012 Q1 | 183 | 0 | 0 | 0.0 |
| 2011 Q4 | 600 | 0 | 0 | 0.0 |
| 2011 Q3 | 0 | 0 | 0 |
Show 3 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2011 Q2 | 0 | 0 | 0 | |
| 2011 Q1 | 340 | 2 | 0 | 5882.4 |
| 2010 Q4 | 60 | 0 | 0 | 0.0 |
No reportable incidents on file.
MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.