Black Hills Mine #1 has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Black Hills Mine #1.
Fatalities
0
Total incidents
142
Years on record
1983–2001
Latest incident
Apr 2001
Compliance record
MSHA citations since 2000
12
citations
5
significant & substantial
$1,190
proposed penalties
$1,190
paid to date
100% of proposed penalties paid to date, a $0 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 583 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Black Hills Mine #1 has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1K
proposed penalties
$1K
current assessed
$1K
paid to date
$0
outstanding
11 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2001-03-15.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at Black Hills Mine #1 shows 92% of 24 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2002-01-29, 24 years ago
92%
within 1.5 mg/m3
24
samples
2.98
dust max (mg/m3)
16 samples taken by MSHA inspectors, 8 by the operator.
Most-sampled occupations
HIGHWALL DRILL OPERATOR13
BACKHOE OPERATOR3
BULLDOZER OPERATOR3
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Black Hills Mine #1 recorded 2.03 reportable injury cases per 100 full-time workers in 2001.
Injury rate, 2001
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
2.03
total case rate
2.03
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 6.94 and the all-US-mining average was 5.26 cases per 100 workers.
In Kentucky, coal mining averaged 7.69 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2001 *
2.03
2.03
0.000
2000
1.01
1.01
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2002
12
2001
55
481,997
2000
84
908,644
Source: MSHA quarterly employment and production, updated weekly.
Black Hills Mine #1 sits in Hopkins County, Kentucky, where the Census mining category is 2.7% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Hopkins County, Kentucky · Population 45,143
2.7%
Mining share of county employment
$57,610
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
EE WAS HOOKING UP HOIST CHAIN AND SQUATTED DOWN AND TWISTED HIS RIGHT KNEE. HE WAS NOT HOLDING ANYTHING-BENDING DOWN TO PICK UP PIN AND HIS KNEE POPPED.
March 2, 1999KY · Coallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
EE WAS PULLING POWER CABLE AROUND THE TUB. HE WENT TO PULL CABLE OUT OF THE WAY AND HIT HIS HEAD ON THE MIDDLE LIGHT. HE JAMMED HIS NECK AND UPPER BACK.
1998 · 1 incident
August 12, 1998KY · Coalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerHANDLING OF MATERIALS
EE WAS REPAIRING HOIST LINK & STRAINED HIS LOWERBACK. HE DID NOT NOTIFY EMPLOYER UNTIL 8/14/98 OF ACCIDENT WENT TO A CHIROPRACTOR ON 8/18/98 & EMPLOYER WAS NOT AWARE OF HIS DISABILITY OR THAT HE HAD BEEN RESTRICTED FROM WORK UNTIL 8/27/98
1997 · 5 incidents
September 26, 1997KY · Coalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverSLIP OR FALL OF PERSON
EE WAS CLIMBING DOWN A STORAGE BIN LADDER WHEN SOME WASPS AROUND THE LADDER DISTRACTED HIM, CAUSING HIS FOOT TO MISS THE NEXT STEP DOWN WITH THE MISSED STEP, CAUSING HIM TO FALL ABOUT 8 FT TO THE GROUND. HE HIT HIS RT ELBOW ON THE GROUND CAUSING A HAIRLINE FRACTURE.
WHILE USING CHEATER BAR TO BOOM DOWN AN EXPLOSIUVES STORAGE MAGAZINE THE EMPLOYEE PULLED A MUSCLE IN HIS LOWER BACK. THE MAGAZINE WAS BEIUNG CHAINED DOWN ON A TRAILER SO IT COULD BE MOVED TO A NOTHER LOCATION.
January 20, 1997KY · Coaltipple/top lander/skip dumper operator, binman, topmanSLIP OR FALL OF PERSON
EMP WAS COMING OUT OF TIPPLE DOOR ONTO STAIRWAY. SLIPPED ON ICE AND SLID DOWN THE STEPS. EMP SUFFERED A CONTUSION ON HIS LEFT KNEE AND A LUMBAR STRAIN.
January 18, 1997KY · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techMACHINERY
Charolais Corp · Caught in, under or between a moving and a stationary object
EE WAS WORKING ON AUGER IN TIPPLE AUGER JUMPED AND CAUGHT HIS ARM BETWEEN SPLASH BOARD AND AUGER.
AFTER LOADING A HOLE, THE EMPLOYEE WAS PLACING THE AUGER BACK IN THE CRADLE OF THE BULK TRUCK. HIS LEFT HAND WAS CUT WHEN THE AUGER DROPPED DOWN CATCHING HIS HAND BETWEEN THE CONTROL LEVER AND THE AUGER.
April 4, 1994KY · Coalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerHANDLING OF MATERIALS
WHILE MAKING FOOT PATROL OF SUPPLY AREA & CHECKING THE AREA I STARTED TO GO BACK TO MY VEHICLE THEN I STEPPED ON A PIECE OF PIPE & FELL ON MY TAIL BONE
EMPLOYEE WAS CLIMBING STAIRS LEADING TO RAIL FACILIATY OFFICE & HIT HIS LEFT HAND ON THE HAND RAIL. HE BROKE A BONE IN HIS LEFT HAND.
July 9, 1993KY · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Charolais Corp · Absorption of radiations, caustics, toxic and noxious substances
EMPLOYEE WAS CLEANING OUT A HOSE LINE, PRESSURE IN LINE CAUSED HOSE O BLOW OFF AND HIT EMPLOYEE ABOUT HIS FACE AND EYES. FLUID IN HOSE ALSO GO INTO EMPLOYEES EYES.
June 25, 1993KY · Coalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverSLIP OR FALL OF PERSON
54736YEE WAS CHANGING A GREASE HOSE ON A BREAKER TRUNION,HE SLIPPED OFF THE END OF BELT AND LANDED ON HIS FEET.HE COMPLAINED OF PAIN IN HIS LOWER BACK AND LOWER FRONT AREA.
July 30, 1992KY · Coalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorSLIP OR FALL OF PERSON
Charolais Corp · Fall to lower level, (Not Elsewhere Classified)
54736YEE WAS GOING TO CLEAN A SCREEN IN DITCH SLIPPED ON A PIECE OF SLATE SLID DOWN SIDE OF DITCH HURT HIS RT KNEE & LEFT BACK
June 23, 1992KY · Coallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
Charolais Corp · Over-exertion in pulling or pushing objects
EMPLOYEE WAS RAISING AN OVERHEAD DOOR BY PULLING CHAIN,SOMETHING PULLED BELOW HIS RIBS IN THE STOMACH AREA.
April 16, 1992KY · Coalbelt foreman, maintenance foreman, maintenance supervisorSLIP OR FALL OF PERSON
EMPLOYEE WAS REPAIRING AN AIR COMPRESSOR. WHILE KNEELING BESIDE SAID COMPRESSOR, EMPLOYEE STRUCK A METAL CORNER OF THE COMPRESSOR WITH HIS LEFT LEG.
August 19, 1991KY · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Charolais Corp · Caught in, under or between a moving and a stationary object
EMPLOYEE WAS HELPING REMOVE DRIVE SHAFT FROM WATER TRUCK.DRIVE SHAFT SLIPPED AND CAUGHT EMPLOYEES FINGER BETWEEN DRIVE SHAFT AND TRANSMISSION,CAUSING COMPRESSION OF RIGHT MIDDLE FINGER,RESULTI NG IN LACERAATION OF FINGER.
February 19, 1991KY · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDTOOLS (NONPOWERED)
EMPLOYEE WAS GETTING IN TRUCK GRABBED HAND RAIL WITH HIS LEFT HAND & PUT FOOT ON STEP & HIS FOOT SLIPPED & HE FELL AGAINST THE TRUCK PUTTING ALL HIS WEIGHT ON HIS LEFT ARM WHICH PULLED THE LIN ING OF HIS MUSCLE & COLLAPSED HIS LUNG
AS THE MAN WAS LOADING 50# BOXES ONTO A FLALT BED TRUCK HE TWISTED HIS BACK LEADING TO THE SPRAINED RIB CAGE
March 7, 1989KY · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techIGNITION OR EXPLOSION OF GAS OR DUST
EMPLOYEE WAS WORKING ON A LOADER HE FELL AGAINST THE BATTERY BOX COVER AND CUT HIS FOREHEAD EMPLOYEE WAS TAKEN TO REGIONAL MEDICAL CENTER AND RECIEVED TEN STITCHES
ADJUSTED SAND BLASTER WAS USIGN IT PULLED ON HOSE AND TWISTED WRIST AND WENT TOWARDS HIM. AUTOMATIC SHUT OFF THEN OCCURRED. HAD ON SAFETY HOOD AND VEST. SCRAPPED AND CUT CHIN , NECK AND CHES T.
February 11, 1988KY · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
CLEANING COAL OFF TOP OF T RUCK SLIPPED ON PIECE OF COAL AND FELL 12 FT BRUISED RT SHOULDER SHATTERED RT HIP BONE CUTS ON RIGHT SIDE OF FACE BRUISED RT HAND AND ARM
May 22, 1985KY · Coalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverHANDLING OF MATERIALS
WALKING BESIDE FORKLIFT HELPING I.NAME MOVE PIEC OF METAL.METAL WAS 11\8\\ LONG X 12\\WIDE X 2\\THICK. USING CHAIN TO LIFT METAL AND CHAIN SLIPPED.WHEN ME ON RIGHT SIDE OF BODY.
May 25, 1984KY · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS