Mining Incidents

BLAIR QUARRY: 84 MSHA citations Metal/Non-Metal

Controlled by Vulcan Materials Company
Blair, Fairfield County, SC  ·  Active
MSHA Mine ID: 3800010

BLAIR QUARRY has $15K in proposed MSHA penalties and $0 outstanding across 3 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at BLAIR QUARRY.

Fatalities
0
Total incidents
27
Years on record
1984–2018
Latest incident
Sep 2018
Compliance record
MSHA citations since 2000
84
citations
21
significant & substantial
$15,225
proposed penalties
$14,197
paid to date
93% of proposed penalties paid to date, a $1,028 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
77
inspections on record
1,184
inspection hours
7.1
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
84 citations across 1,184 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2022-02-16.
On record since 2022.
Source: MSHA imminent-danger order records, updated weekly.

BLAIR QUARRY has $15K in proposed MSHA penalties and $0 outstanding across 3 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$15K
proposed penalties
$14K
current assessed
$14K
paid to date
$0
outstanding
81 assessments are final orders; 3 contested dockets.
Of $4K in penalties contested before the Commission, $3K was upheld in final decisions.
As of the most recent assessment on 2023-10-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
25.6%
significant & substantial
9.8%
high negligence or reckless
24.4%
reasonably likely or greater
69.5%
permanently disabling or fatal if injury occurs
Negligence coding: 1.2% none, 11.0% low, 78.0% moderate, 9.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
3 citations taken to the federal commission · 4% of citations on record
  • Settled 1 · 33%
  • Stood as issued 1 · 33%
  • Vacated or withdrawn 1 · 33%
67%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
32%
Penalty reduction in decided contests
$4K proposed, $3K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2023-07-11.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2023-0014 Settlement Bulluck 2023 $3K → $3K
SE 2023-0066 Dismissal Bulluck 2023 $563 → $0
SE 2009-854M Withdrawal Bulluck 2011 $207 → $0
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2024-06-20
23%
of limit-tested samples over the exposure limit
39
samples
13
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz153 over
  • Respirable dust, <.1mg21
  • Unlisted Particulate, respirable, <1% Qtz3
Show the individual readings (39)
Date Contaminant Concentration Limit Conc / limit Occupation
2003-12-03 Quartz, respirable, >1% Qtz 1.19 1.19 1.00 Crusher Oper/Worker
2003-10-22 Quartz, respirable, >1% Qtz 1.15 0.84 1.37 Crusher Oper/Worker
2002-11-14 Quartz, respirable, >1% Qtz 0.75 0.6 1.25 Crusher Oper/Worker
2024-06-20 Respirable dust, <.1mg 0 Utility Man
2024-06-20 Respirable dust, <.1mg 0 Truck Driver
2024-06-20 Respirable dust, <.1mg 0 Jackhammer Operator
2024-06-20 Unlisted Particulate, respirable, <1% Qtz 0.6 Crusher Oper/Worker
2023-10-11 Respirable dust, <.1mg 0 Washer Operator
2023-10-11 Quartz, respirable, >1% Qtz 0.25 0.5 0.50 Crusher Oper/Worker
2023-10-11 Respirable dust, <.1mg 0 Lab Technician
2023-10-11 Respirable dust, <.1mg 0 Utility Man
2023-04-26 Quartz, respirable, >1% Qtz 0.15 0.6 0.25 Crusher Oper/Worker
2023-04-26 Respirable dust, <.1mg 0 Backhoe Operator
2023-04-26 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-04-26 Respirable dust, <.1mg 0 Utility Man
2023-04-26 Respirable dust, <.1mg 0 Utility Man
2022-06-01 Quartz, respirable, >1% Qtz 0.15 0.37 0.41 Cleanup Man
2022-06-01 Quartz, respirable, >1% Qtz 0.17 Crusher Oper/Worker
2022-06-01 Respirable dust, <.1mg 0 Drill Operator, Rotary Air
2019-04-03 Quartz, respirable, >1% Qtz 0.13 Lab Technician
2019-04-03 Respirable dust, <.1mg 0 Laborer, Bullgang
2011-09-01 Respirable dust, <.1mg 0 Drill Operator, Rotary
2010-08-24 Respirable dust, <.1mg 0 Truck Driver
2010-08-24 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-08-24 Respirable dust, <.1mg 0 Crusher Oper/Worker
2008-07-16 Respirable dust, <.1mg 0 Crusher Oper/Worker
2008-07-16 Respirable dust, <.1mg 0 Crusher Oper/Worker
2007-05-31 Quartz, respirable, >1% Qtz 0.49 0.64 0.77 Drill Operator, Rotary Air
2007-05-31 Quartz, respirable, >1% Qtz 0.36 1.18 0.31 Crusher Oper/Worker
2003-10-22 Quartz, respirable, >1% Qtz 0.36 1.4 0.26 Truck Driver
2003-10-22 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-10-22 Quartz, respirable, >1% Qtz 0.24 0.99 0.24 Truck Driver
2002-11-14 Respirable dust, <.1mg 0 Dragline Operator
2002-11-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2002-11-14 Unlisted Particulate, respirable, <1% Qtz 0.29 Truck Driver
2002-11-14 Unlisted Particulate, respirable, <1% Qtz 0.14 Truck Driver
2001-04-18 Quartz, respirable, >1% Qtz 0.32 0.47 0.68 Crusher Oper/Worker
2001-04-18 Quartz, respirable, >1% Qtz 0.13 0.27 0.48 Utility Man
2001-04-18 Quartz, respirable, >1% Qtz 0.33 0.58 0.57 Lab Technician
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

BLAIR QUARRY recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In South Carolina, metal and nonmetal mining averaged 1.42 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 9.12 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Lone Star Industries Inc 1950 to 1986
  2. Tarmac-Lonestar Inc 1987 to 1988
  3. Tarmac Mid-Atlantic Inc 1988 to 2000
  4. Vulcan Construction Materials, LLC 2000 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 13
2025 14
2024 13
2023 13
2022 12
2021 11
2020 11
2019 11
2018 10
2017 11
2016 9
2015 7
2014 8
2013 8
2012 8
2011 6
2010 12
2009 10
2008 12
2007 14
2006 13
2005 14
2004 13
2003 13
2002 14
2001 15
2000 13
Source: MSHA quarterly employment and production, updated weekly.

BLAIR QUARRY sits in Fairfield County, South Carolina, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Fairfield County, South Carolina · Population 20,741
0.2%
Mining share of county employment
$46,972
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 6,290 0 0 0.0
2026 Q1 5,821 0 0 0.0
2025 Q4 6,013 0 0 0.0
2025 Q3 5,908 0 0 0.0
2025 Q2 7,811 0 0 0.0
2025 Q1 5,304 0 0 0.0
2024 Q4 7,740 0 0 0.0
2024 Q3 7,242 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 8,029 0 0 0.0
2024 Q1 7,841 0 0 0.0
2023 Q4 7,120 0 0 0.0
2023 Q3 7,646 0 0 0.0
2023 Q2 7,965 0 0 0.0
2023 Q1 7,342 0 0 0.0
2022 Q4 6,619 0 0 0.0
2022 Q3 7,966 0 0 0.0
2022 Q2 7,188 1 1 139.1
2022 Q1 6,829 0 0 0.0
2021 Q4 6,066 0 0 0.0
2021 Q3 5,983 0 0 0.0
2021 Q2 5,228 0 0 0.0
2021 Q1 6,206 0 0 0.0
2020 Q4 6,003 0 0 0.0
2020 Q3 6,339 0 0 0.0
2020 Q2 6,519 2 0 306.8
2020 Q1 6,220 0 0 0.0
2019 Q4 6,395 0 0 0.0
2019 Q3 6,774 0 0 0.0
2019 Q2 6,071 0 0 0.0
2019 Q1 6,632 0 0 0.0
2018 Q4 4,567 0 0 0.0
2018 Q3 5,560 0 0 0.0
2018 Q2 5,934 3 1 505.6
2018 Q1 5,870 0 0 0.0
2017 Q4 4,650 0 0 0.0
2017 Q3 4,891 0 0 0.0
2017 Q2 5,528 0 0 0.0
2017 Q1 5,311 0 0 0.0
2016 Q4 4,762 0 0 0.0
2016 Q3 6,434 0 0 0.0
2016 Q2 5,398 0 0 0.0
2016 Q1 5,457 0 0 0.0
2015 Q4 4,651 0 0 0.0
2015 Q3 4,539 0 0 0.0
2015 Q2 4,778 3 2 627.9
2015 Q1 4,086 1 0 244.7
2014 Q4 4,035 0 0 0.0
2014 Q3 4,594 1 0 217.7
2014 Q2 4,859 0 0 0.0
2014 Q1 4,478 0 0 0.0
2013 Q4 4,041 0 0 0.0
2013 Q3 4,526 0 0 0.0
2013 Q2 3,959 1 0 252.6
2013 Q1 4,523 0 0 0.0
2012 Q4 3,728 0 0 0.0
2012 Q3 4,112 0 0 0.0
2012 Q2 4,466 0 0 0.0
2012 Q1 4,549 1 0 219.8
2011 Q4 3,805 1 0 262.8
2011 Q3 3,640 0 0 0.0
2011 Q2 3,272 0 0 0.0
2011 Q1 3,853 0 0 0.0
2010 Q4 3,296 0 0 0.0
2010 Q3 3,564 0 0 0.0
2010 Q2 4,361 0 0 0.0
2010 Q1 4,170 1 0 239.8
2009 Q4 3,876 2 0 516.0
2009 Q3 5,570 0 0 0.0
2009 Q2 7,536 0 0 0.0
2009 Q1 5,640 2 0 354.6
2008 Q4 5,044 0 0 0.0
2008 Q3 7,241 1 0 138.1
2008 Q2 8,820 0 0 0.0
2008 Q1 8,128 1 0 123.0
2007 Q4 7,601 0 0 0.0
2007 Q3 8,783 0 0 0.0
2007 Q2 9,261 2 0 216.0
2007 Q1 9,962 0 0 0.0
2006 Q4 7,509 0 0 0.0
2006 Q3 9,055 5 1 552.2
2006 Q2 8,146 5 3 613.8
2006 Q1 8,397 0 0 0.0
2005 Q4 8,518 0 0 0.0
2005 Q3 9,749 0 0 0.0
2005 Q2 7,790 0 0 0.0
2005 Q1 9,525 2 0 210.0
2004 Q4 8,459 0 0 0.0
2004 Q3 9,321 0 0 0.0
2004 Q2 8,852 1 1 113.0
2004 Q1 7,616 0 0 0.0
2003 Q4 7,647 2 1 261.5
2003 Q3 8,531 0 0 0.0
2003 Q2 8,139 0 0 0.0
2003 Q1 7,734 0 0 0.0
2002 Q4 7,117 0 0 0.0
2002 Q3 6,801 3 1 441.1
2002 Q2 7,156 0 0 0.0
2002 Q1 8,777 0 0 0.0
2001 Q4 8,432 3 0 355.8
2001 Q3 8,731 0 0 0.0
2001 Q2 13,317 4 2 300.4
2001 Q1 8,783 0 0 0.0
2000 Q4 6,621 2 0 302.1
2000 Q3 6,080 3 0 493.4
2000 Q2 8,063 0 0 0.0
2000 Q1 8,308 2 0 240.7
No fatalities recorded at this mine.

Reportable incidents

27 on file

2018 · 1 incident

September 25, 2018 SC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Caught in, under or between a moving and a stationary object

The employee was adjusting the crusher when the toggle block didn't seat, ee turned the fly wheel with the v-belt and fingers got caught in between the v-belt and sheave causing a fracture to the right hand.

2014 · 1 incident

September 12, 2014 SC · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Vulcan Construction Materials, LLC · Over-exertion in pulling or pushing objects

Employee heard a pop and felt a pain in his right shoulder while tightening bolts on a loader.

2008 · 2 incidents

March 20, 2008 SC · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Vulcan Construction Materials, LLC · Struck against a moving object

Employee was digging a ramp shot out using a front end loader. He reported the digging to be rough and it caused him to bounce around inside the cab. He said he felt soreness in his neck and shoulder all week and on Monday he thought he needed to see a doctor.

2007 · 1 incident

July 2, 2007 SC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Struck by falling object

Replacing a screen on the screen deck, the screen fell and hit ee on the arm creating a puncture wound to the right arm.

2006 · 2 incidents

October 9, 2006 SC · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Caught in, under or between a moving and a stationary object

Employee pinched top of left index finger and joint between door handle and heater console on loader.

2003 · 1 incident

March 31, 2003 SC · Metal/Non-Metal miner, nec HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Over-exertion in pulling or pushing objects

EE WAS CHANGING SCREEN CLOTH IN BOTTOM DECK OF WASH SCREEN. AFTER CHANGING SCREEN CLOTH, EE WAS LYING ON HIS BACK PULLING HIMSELF OUT OF SCREEN. AS EE PULLED HIS UPPER BODY OUT OF SCREEN, HE FELT PAIN IN RT. SHOULDER.

1995 · 3 incidents

March 30, 1995 SC · Metal/Non-Metal mine manager, mine foreman, mine owner SLIP OR FALL OF PERSON
Tarmac Mid-Atlantic Inc · Struck against stationary object

EE WAS LOWERING HIMSELF ON A WORK PLATFORM ON A CONVEYOR & SLIPPED ON A BUILD UP OF MATERIAL. HE STRUCK HIS KNEE ON THE SIDE OF THE CONVEYOR CAUSING A CUT WHICH REQUIRED 3 STITCHES TO CLOSE.

March 20, 1995 SC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Tarmac Mid-Atlantic Inc · Caught in, under or between (Not Elsewhere Classified)

WORKING ON A 4 1/4 CRUSHER TRYING TO LOOSEN THE BOWL WITH A HYDRAULIC JACK. THE JACK BRAKE AND THE HEAD RETRACTED MASHING HIS FINGER BETWEEN THEBOWL AND THE JACK. HE NEEDED 3 STITCHES TO REPAI R THE CUT ON HIS THUMB.

January 20, 1995 SC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Tarmac Mid-Atlantic Inc · Caught in, under or between a moving and a stationary object

EMPLOYEES WERE USING A CABLE HOIST & J HOOK TO REMOVE A ROCK THAT WAS BLOCKING THE OPENING TO THE JAW CRUSHER AS THEY HOISTED THE ROCK THE HOOK JUMPED UP & STRUCK THE EMPLOYEE ON THE HAND IT M ASHED HIS FINGER BETWEEN THE HOOK & THE GUARD RAIL CRUSHING THE BONE JUST ABOVE THE MIDDLE JOINT THE HOSPITAL REMOVED HIS FINGER ABOVE THE MIDDLE JOINT

1994 · 4 incidents

October 15, 1994 SC · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator STEPPING OR KNEELING ON OBJECT
Tarmac Mid-Atlantic Inc · Struck against stationary object

STEPPED OFF OF A BACKHOE ON TO A ROCK AND TWISTED HIS RIGHT ANKLE CAUSING A MILD SPRAIN.

August 5, 1994 SC · Metal/Non-Metal HANDTOOLS (NONPOWERED)
Tarmac Mid-Atlantic Inc · Struck by... (Not Elsewhere Classified)

HIT HIS HAND WITH A HAMMER WHILE DRIVING A PIN OUT OF A DIPPER TOOTH. HE WAS WEARING GLOVES, BROKEN LEFT THUMB.

July 29, 1994 SC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Tarmac Mid-Atlantic Inc · Struck by... (Not Elsewhere Classified)

EMPLOYEES WERE ATTEMPTING TO REMOVE AN INTAKE PIPE AND FOOT VALVE FROM A PUMP HOUSE.THEY WERE IN THE PROCESS OF CUTTING THE FLANGE LOOSE WHEN THE ELL(SUPPORTED BY A CRANE) BROKE ALLOWING THE P UMP HOUSE AND STRUCTURE TO TOPPLE INTO THE POND.THE EMPLOYEES WERE INSIDE THE PUMPHOUSE AT THE TIME AND DID NOT REALIZE THAT THE PIPE WAS SUPPORTING THE STRUCTURE.

July 29, 1994 SC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Tarmac Mid-Atlantic Inc · Fall onto or against objects

EMPLOYEES WERE ATTEMPTING TO REMOVE AN INTAKE PIPE AND FOOTVALVE FROM A PUMP HOUSE.THEY WERE IN THE PROCESS OF CUTTING THE PLANGE LOOSE WHEN THE ELL(SUPPORTED BY A CRANE) BROKE ALLOWING THE PU MPHOUSE AND STRUCTURE TO TOPPLE INTO THE POND. THE EMPLOYEES WERE INSIDE THE PUMP HOUSE AT THE TIME AND DID NOT REALIZE THAT THE PIPE WAS SUPPORTING THE STRUCTURE.

1993 · 3 incidents

November 13, 1993 SC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Tarmac Mid-Atlantic Inc · Caught in, under or between (Not Elsewhere Classified)

WHILE ATTEMPTING TO THROW AN OLD SCREEN FROM A LANDING, THE MOUNTING HOOK ON THE SCREEN CAUGHT THE EMPLOYEES RIGHT WRIST CAUSING A CUT WHICH VEGIURED 8 STITCHES TO CLOSE.

September 13, 1993 SC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech STEPPING OR KNEELING ON OBJECT
Tarmac Mid-Atlantic Inc · Struck against stationary object

EMPLOYEE WAS WALKING ACROSS A FLAT BED TRUCK. A CHAIN WAS LAYING ON THE FLOOR. THE EMPLOYEE INTENDED TO STEP ACROSS THE CHAIN, BUT MISSTEPPED AND STEPPED ON THE CHAIN. HE TWISTED HIS ANKLE CAU SING A BAD SPRAIN.

June 16, 1993 SC · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS
Tarmac Mid-Atlantic Inc · Caught in, under or between a moving and a stationary object

SUPERVISOR WAS KNEELING DOWN FASTENING THE SHACKLE TO THE PUMP HOOK TO REPOSITION THE PUMP. ANOTHER EMPLOYEE WALKED OVER THE BERM TO HELP THE SUPERVISOR AND ACCIDENTLY KICKED OVER THE ROCK APP ROXIMATELY 4 LBS, ROLLED DOWN THE PILE, JUMPED OVER THE SUPERVISORS ARM AND MASHED HIS FINGER BETWEEN THE ROCK AND THE SHACKLE, BREAKING HIS FINGER ON THE TIP.

1992 · 1 incident

November 4, 1992 SC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Tarmac Mid-Atlantic Inc · Struck by... (Not Elsewhere Classified)

THE INJURED WAS BACKING UP TO THE SHOVEL TO GET LOADED.THE FRONT TIRE OF THE TRUCK HE WAA DRIVING ROLLED OVER A ROCK CAUSING THE STEERING WHEEL TO SPIN.THE WHEEL HIT HIM IN THE WRIST (LEFT) CA USING A SPRAIN.

1991 · 1 incident

October 9, 1991 SC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Tarmac Mid-Atlantic Inc · Struck by... (Not Elsewhere Classified)

INJURED WAS WORKING ON CHAIN ON RADIAL STACKER-HE PULLED GUARD UP TO WORK ON IT AND WHILE WORKING ON CHAIN THE GUARD SLIPPED DOWN AND HIT LITTLE FINGER ON RT HAND.

1989 · 2 incidents

August 7, 1989 SC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Tarmac Mid-Atlantic Inc · Struck by flying object

INJURED WAS SHARPENING DRILL BIT WITH GRINDING ROCK GRINDING ROCK SHATTERED KNOCKING SHIELD OFF GRINDER. SHIELD FLEW UP & STRUCK EMPL ABOVE LEFT EYE.

March 31, 1989 SC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Tarmac Mid-Atlantic Inc · Struck by falling object

USING DRY BAR TO ON CLOG CHUTE- ROCK CAME LOOSE FELL HITTING HIM IN MOUTH.

1987 · 2 incidents

December 15, 1987 SC · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger STEPPING OR KNEELING ON OBJECT
Tarmac-Lonestar Inc · Struck against stationary object

I.NAME STEPPED 3NTO MUD PUDDLE GETTING DOWN OFF DROP BALL CRANE AND STEPPED ON ROCK TURNED HIS RT ANKLE HAIR LINE FRACTURE OF RT ANKLE

May 18, 1987 SC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Tarmac-Lonestar Inc · Struck by falling object

I.NAME WAS USIN1 RATCHET WRENCH TO TIGHTEN BOLT AND HE WAS BELOW HIM ON THE GROUND WHEN THE WRENCH SLIPPED OUT OF HIS HAND AND FELL BELOW (6'), HIT AND BROKE A SMALL BONE IN MIDDLE FINGER OF L EFT HAND. 3

1986 · 2 incidents

September 9, 1986 SC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Lone Star Industries Inc · Struck by falling object

INJ WAS HELPING3PUT 4X8 STEEL PLATES IN METAL STORAGE RACK ON GROUND THE WT OF THE STEEL PLATES CAUSED THE UPRIGHT ANGLES HOLDING THE STEEL TO COLPASE AND THE PLATES FELL BREAKING I NAMES LE LEG 3

July 7, 1986 SC · Metal/Non-Metal superintendent HANDLING OF MATERIALS
Lone Star Industries Inc · Caught in, under or between (Not Elsewhere Classified)

OILING PLATE ON3JAW CRUSHER USING A OIL CAN BUCKET. SWING JAW CAUGHT BUCKET AND MASHED FINGER BETWEEN OIL CAN AND JAW FRAME.

1984 · 1 incident

February 17, 1984 SC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Lone Star Industries Inc · Fall to lower level, (Not Elsewhere Classified)

INJURED WAS STANDING ON A LARGE ROCK OVERSEEING WORK OF BULLDOZER. HE STEPPED OFF ROCK TWISTED RIGHT ANKLE AND FELL. SPRAINED RIGHT ANKLE AND SLIGHT FRACTURE OF THE RIGHT FIBULA.