The employee attempted to stop a stack of roof mesh from tipping over. He tripped getting out of the way and the mesh struck him as he was on the mine floor.
Bowie No 3 Mine: 130 MSHA citations Coal
Bowie No 3 Mine has $12K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Bowie No 3 Mine.
- Fatalities
- 0
- Total incidents
- 13
- Years on record
- 2004–2005
- Latest incident
- Sep 2005
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Bowie No 3 Mine has $12K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.MSHA sampling at Bowie No 3 Mine shows 91% of 262 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2005-09-27, 20 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR138
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)17
- ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)16
Silica (quartz)
Last sampled: 2005-09-12, 20 years ago- CONTINUOUS MINER OPERATOR10
- JACK SETTER (LONGWALL)1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2005-08-31, 20 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- BELT CLEANER2
- CONTINUOUS MINER HELPER2
- LABORER2
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2005 | 89% | 170 |
| 2004 | 95% | 87 |
| 2003 | 100% | 5 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2005 | 6.7 | 16 |
| 2004 | 5.8 | 7 |
| Year | over PEL | samples |
|---|---|---|
| 2005 | 0% | 13 |
| 2004 | 20% | 5 |
Bowie No 3 Mine recorded 5.98 reportable injury cases per 100 full-time workers in 2005.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2005 | 5.98 | 5.31 | 0.000 |
| 2004 * | 2.09 | 2.09 | 0.000 |
- Bowie Resources Limited 2002 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2005 | 140 | 2,219,082 |
| 2004 | 46 | 599,990 |
Bowie No 3 Mine sits in Delta County, Colorado, where the Census mining category is 5.2% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2005 Q4 | 0 | 0 | 0 | |
| 2005 Q3 | 117,313 | 53 | 7 | 451.8 |
| 2005 Q2 | 121,057 | 14 | 7 | 115.6 |
| 2005 Q1 | 62,840 | 23 | 4 | 366.0 |
| 2004 Q4 | 36,251 | 13 | 1 | 358.6 |
| 2004 Q3 | 23,131 | 14 | 2 | 605.2 |
| 2004 Q2 | 20,388 | 6 | 0 | 294.3 |
| 2004 Q1 | 16,004 | 0 | 0 | 0.0 |
Reportable incidents
13 on file2005 · 10 incidents
This employee attemped to move and set a shield by remote means. The shield appears to have set by the auto-set function. The side seal was over lapped and the side seal came off striking the employee.
The employee attempted to move a 7 5/8 drill steel. The steel rolled into another steel pinching the left middle finger.
A shackle broke while pulling on the mobile tailpiece of the longwall with a "miner puller". A piece of the tow chain struck the employee.
The employee was helping to move a steel roof support beam over the stageloader. This employee pinched his right index finger between the beam and the electrical nip on the stageloader.
On 07/22/05 the employee reported C-spine injury from an injury sustained on 07/10/05. The employee was setting secondary support along the stageloader when a piece of roof rock struck him on the head.
A fall of roof prevented travel off of the Head Gate of the B-1 panel at crosscut 40.
Employee stated that as he moved a shield, a rock fell from the canopy, striking him in the right leg.
On 4/12/05 completion of an investigation and review of medical records, indicated the employee suffered a second hernia while exiting a Wagner Scoop.
The employee was determined to have a hernia on the right side. He believes that it occurred on 02/07/05 while assisting the setting of Big John roof support. (4/18/05 per call - hernia repaired)
2004 · 3 incidents
Employee was performing work involving spraying of dry mix shotcrete. Employee wore appropriate PPE. After work employee noticed persistant eye irritation from caustic shotcrete dust and received eye irrigations and antibiotic ointment as precaution.
Employee was performing work involving spraying of dry mix shotcrete. Employee wore appropriate PPE. After work employee noticed persistent eye irritations from caustic shotcrete dust and received eye irrigations and antibiotic ointment as precaution. (No Lost Time)
The employee attempted to cut a wire band on a bundle of wire roof mesh to separate the smaller bundles. The mesh sprung and then recoiled back into the employee, pinning him between bundles of mesh.